Safe shopping with solar experts
Fast Shipping
Top choice renowned brands
Customer service:
+49 (0) 8721 91994-00

The Victron Quattro 48/15000/200-100/100 230V VE.Bus (MPN: QUA483150000) combines a high-performance sine wave inverter, a battery charger and an automatic transfer switch in a compact housing. With two AC inputs, the Quattro enables the connection of two independent voltage sources, while immediately taking over the supply of the connected devices in the event of a failure of the external power supply - ideal for emergency power applications.

In addition, the Quattro enables practical parallel connection so that up to six devices can be combined to achieve a significant output of up to 162 kW. Additional features such as PowerControl and PowerAssist technologies optimize the power supply and extend the use of on-board generators and shore power connections.

Highlights of the Victron Quattro 48/15000

  • 2 AC inputs & 2 AC outputs
  • PowerAssist function
  • Three-phase operation
  • PowerControl
  • Split-phase option

Two alternating current inputs

The Quattro enables connection to two separate AC power sources, for example to the public power grid and a generator or to two generators. It automatically establishes the connection to the active source.

Two AC outputs

The main output ensures uninterrupted operation. In the event of a mains failure or an interruption in the connection to the shore or generator power, the Quattro immediately takes over the power supply to the connected loads. This switchover takes place in less than 20 milliseconds, ensuring continuous operation of computers and other electronic devices.

The second output only supplies energy if alternating current is available at one of the Quattro's inputs. It is particularly suitable for loads that must not discharge the battery, such as water heaters.

Three-phase operation

It is possible to operate three units in a three-phase configuration. In addition, an inverter output of 144 kW/180 kVA or a charging current of 2400 A can be achieved by connecting up to four sets of three 15 kVA units in parallel.

PowerAssist

With this function, the PowerControl principle expands its possibilities, as the Quattro can support an insufficient alternative energy source. Load peaks often only occur temporarily. In such cases, the Quattro ensures that insufficient mains or generator power is immediately compensated for by energy from the battery. When the load is reduced, for example by switching off consumers, the energy that is then available again can be used to charge the batteries.

PowerControl

The Quattro functions as a powerful battery charger, which requires considerable amounts of power (16 A per 5 kVA Quattro at 230 VAC) for the current consumption of generators or shore power supplies. A current limit can be set on each of the AC inputs. The Quattro adjusts its charging requirements accordingly and only uses the remaining current that is available for connected AC consumers. This prevents the generator or mains connection from being overloaded.

Intuitive monitoring and control

Compatibility with the Victron Smart Feature app enables user-friendly monitoring and control of the system from mobile devices. This gives you the ability to track energy consumption in real time and make adjustments to maximize efficiency.

Protection key

  • Output short circuit
  • overload
  • Battery voltage too high
  • Battery voltage too low
  • Temperature too high
  • 230 VAC at the inverter output

Technical data

General information:

  • Nominal battery voltage: 48V battery
  • Input voltage range: 187-250 VAC
  • Input frequency: 50/60 Hz
  • Additional output: 50A
  • Programmable relay: 3x
  • Maximum altitude: 3500m
  • Operating temperature: -20°C to +60°C
  • Protection class: IP20
  • Humidity (non-condensing): max. 95%
  • Weight: 72kg
  • Dimensions: 572 x 488 x 344 mm

Inverter:

  • Peak power: 25000W
  • Input current: 350A
  • Max. Efficiency: 96%
  • No-load power: 110W

Charger:

  • Charging voltage - constant voltage: 57.6 VDC
  • Charging voltage - charge retention: 55.2 VDC
  • Charging current house battery: 200A
  • Charging current starter battery: 4A

Scope of delivery

1x Victron Quattro 48/15000/200-100/100 230V VE.Bus

Victron_Quattro_15kVA_Handbuch.pdf Download
Victron_Quattro_15kVA_Gehäuseabmessung.pdf Download
Victron_Quattro_15kVA_Certificate_of_Conformity.pdf Download
Victron_Quattro_15kVA_Datenblatt.pdf Download
Victron_Quattro_15kVA_Declaration_of_Conformity.pdf Download
Battery voltage: 48 V
Manufacturer: Victron
Product Type: Gerätekombination
Protection type: IP20
Rated output voltage: 230V AC / alternating current
Sine wave: true sine wave
Temperature range: -20°C - +60°C
Weight: 72 kg

Manufactuerer Information

Victron Energy

Victron Energy B.V.
De Paal 35
1351 JG Almere
Netherlands

Mail: sales@victronenergy.com

Tel.: +31 365359700

offgridtec.com Reviews with ekomi.de
Loading products