Solar Cable H1Z2Z2-K 1X6 WH/BK

Lapp SOLAR H1Z2Z2-K cables are weather, abrasion and UV-resistant photovoltaic cables. These halogen-free, double-insulated and cross-linked solar cables are suitable for permanent outdoor use to connect earthed and unearthed photovoltaic systems. They are used both for wiring solar modules to each other and for connecting the individual module rows and the inverter. The cable has been tested by TÜV Rheinland according to 2 PfG 1169/08.2007 (PV1-F) design.

This article is sold by the metre. Each item corresponds to one metre. If you buy e.g. 10x this article, you will receive a coherent piece with 10m length.

Important product features:

Cable cross-section: 6mm²
Manufacturer: Lapp Kabel
Colour outer insulation: Black

H1Z2Z2 Solar cables from Lapp can generally be laid in protective pipes suitable for buried installation in the ground if it is ensured that there is no permanent contact with water and that waterlogging is safely drained away. The laying of the cables in the ground as well as the correct design of the cable trench must comply with VDE 0100 Part 520 or comparable standards in order to prevent damage to the protective conduit and permanent exposure of the cables and conduits to penetrating water. Long-term, permanent storage as well as permanent operation of the cables in or under water is not permitted.

Conductor structure

1. conductor: fine stranded tinned copper wire, according to IEC 60228, class 5
2. core insulation: electron beam cross-linked polyolefin co-polymer
3. outer sheath electron beam cross-linked polyolefin co-polymer

Electrical properties

Rated voltage: U0 /U according to IEC AC 1000/1000 V - DC 1500/1500 V
Max. permissible system voltage: 1.8 kV DC (conductor/conductor, not earthed system) according to TÜV 2 PfG 1169/08.2007 Test voltage AC 6.5 kV - DC 15 kV

Thermal properties

Temperature range fixed: -40° C to +120° C max. conductor temperature (according to EN 60216-2)
Temperature range fixed installation: -40 °C to +90 °C ambient temperature (according to TÜV 2 PfG 1169/08.2007)
Installation temperature flexible: max. -25 °C
Thermal pressure resistance according to EN 60811-3-1
Humidity-heat test according to EN 60068-2-78 at 85% air humidity

Mechanical properties

Minimum bending radius when occasionally moved: 4x outer diameter
Minimum bending radius if permanently installed: 5 x cable diameter
Dynamic penetration according to DKE requirements profile PV1-F AK 411.2.3 Annex F
Tear resistance according to DKE requirements profile PV1-F AK 411.2.3 Annex G
Test of tear resistance and elongation according to EN 60811

Chemical properties

Weathering / UV resistance according to EN 50618
Ozone resistance according to EN 50396, method B
Halogen-free according to EN 50267, EN 50525-1
Flame retardant according to IEC 60332-1-2
Acid and alkali resistance according to EN 60811-404 (oxalic acid and caustic soda)

Scope of delivery

1x 1m Lapp solar cable H1Z2Z2-K 1X6 WH/BK