Pytes bracket Pytes E-box-48100R Bracket-Set (f.+b.)

The bracket set from Pytes was specially designed as a bracket for the Pytes E-Box 48100r and includes the Pytes f. Bracket for the front and the Pytes b. Bracket for the rear. Compared to storage in a cabinet, the two brackets take up less space, allow improved ventilation and dissipate heat better. This not only increases the service life of your battery, but also optimizes performance.

Depending on requirements, the frame set can be used for a single E-Box 48100r or for several of the battery packs. The ideal solution, as the storage modules should generally not be stacked on top of each other without spacing. The sides of the brackets are each fitted with two snap fasteners to enable several batteries to be stacked simply and securely on top of each other. This allows up to 4 batteries to be stacked on top of each other and connected and secured by the clamping devices. One set consisting of two brackets is required per storage module.

The bracket set:

• Maximum air circulation for optimum cooling
• 2-part frame set with rubber feet
• Stacking option for 1× Pytes E-Box 48100r
• Total weight: approx. 2 kg
• Dimensions incl. battery: 485×620×150 mm

Installation:

Make sure that the front bracket, the Pytes f. Bracket, has additional screw holes for connection to the battery plate. Install the battery and bracket horizontally to avoid scratching the insulating coating on the battery surface.

Start by installing the brackets on the individual batteries. Then install the first bracket including the battery and stack up to 3 more batteries in the brackets as required. Connect them using the snap locks on all sides and make sure that the locks on all brackets are properly locked. One set consisting of two brackets is required per battery and no more than 4 should be stacked on top of each other.

Scope of delivery:

1× Pytes f. Bracket for the Pytes E-Box 48100r
1× Pytes b. Bracket for the Pytes E-Box 48100r