Pylontech sc0500-100s-v2 Control unit for h48050 Powercube x1 with 2m cable set

The sc0500-100s-v2 from Pylontech acts as a central unit for monitoring and controlling the latest generation. The bms forms an important part of the Powercube x1 high-voltage battery system and enables seamless communication with compatible inverters. To complete the entire system, a further 2-10 battery modules can be connected in addition to the bms, with each high-voltage battery having a capacity of 2.4 kWh. These are connected in series to form a battery tower with a control unit, which can have a maximum capacity of 24 kWh. If several towers are to be connected in parallel, one control unit is required per tower.

The tried and tested communication protocol from Pylontech is directly supported by a large number of inverters. One Kompatibilitätsliste for Pylontech with over 30 brands and companies, including Victron Energy, Growatt, Solis and many more, can be found as a download in our appendices! (Pylontech Compatibility List)

The Powercube x1 control unit protects against:

• Deep discharge and overcharging
• overvoltage during charging
• currents too high during charging and discharging
• over- and undertemperature
• Short circuit and reverse polarity

The Powercube x1 energy storage system

The Powercube x1 series from Pylontech is a high-voltage battery system of the latest generation. The complete system can be used flexibly and expanded as required. An energy system can be set up with at least 2 and up to 10 battery modules. One bms control unit is required per Powecube x1 tower for operation. Caution: The Powercube does not have a soft start circuit!

Flexible expansion

The Powercube battery system from Pylontech offers a high degree of flexibility thanks to its expandable configuration options, which range from 4.8kWh to 24kWh. Installation and expansion of the system is simple and straightforward thanks to the modular design and the use of cables.

monitoring functions of the control unit:

• Operation recording
• Current
• Voltage
• Temperature
• State of charge

Technical data

• Operating voltage range: 60~600V
• Max. Charging/discharging current: 100A
• Protection class: IP20
• Power consumption: 8W
• Operating temperature range: -20°C - +65°C
• Storage temperature range: -40°C - +80°C
• Communication: Modbus RTU/CAN
• Dimensions. 442 x 390 x 132 mm
• Weight: 8.5 kg

Scope of delivery:

1x Pylontech sc500-100s-v2 bms control unit
1x cable set parallel connection incl. earthing
4x m6 nuts + screws
1x manual and certificate