Offgridtec® MobileBlack XL 180W camper solar system 30A MPPT DUO charge controller PERC solar module

The Offgridtec® MobileBlack series impresses with its appealing visual design in elegant black and its extremely convincing performance parameters. Starting with the OLP solar modules in state-of-the-art shingle design and an outstanding cell efficiency of over 22,68%, through to the Offgridtec® MPPT Pro dual charge controller, one can truly speak of a successful selection and product composition from Offgridtec.

MobileBlack XL Caravan Complete System

This complete system contains everything you need to charge your batteries on the move. In addition to charging your on-board battery, the dual regulator included in the set also allows you to charge the starter battery at the same time, as it has a corresponding secondary charging output. The scope of delivery includes extensive information material in which the assembly and connection are explained step by step - this applies to both the technical connection and the bonding of the retaining spoiler and the roof grommet. The roof duct is probably one of the most critical points, as this is where the transition to the interior of the camper takes place. The grommet is made of the same material as the spoiler - the PEG screw connection complies with protection class IP68 and is therefore absolutely waterproof when installed correctly.

Scope of delivery of the MobileBlack XL caravan solar system

• Offgridtec® OLP solar module 180W V2 with shingle technology PERC (1x or 2x depending on choice)
• 1x Offgridtec® 30A MPPT dual solar charge controller with auxiliary charge and AES switching Output
• 1x remote display for MPPT Pro Duo charge Controller
• 1x Offgridtec ABS cable gland 1-way - black with waterproof PEG Gland
• Offgridtec 68cm ABS mounting profiles (1 pair) - for mounting the solar modules in black (1x or 2x depending on choice)
• 1x Offgridtec 8m 2x6mm H07RNF - connection cable solar module to solar charge controller in caravan Version
• 1x Offgridtec 1.5m 10mm² battery connection cable with MIDI fuse holder - connection cable solar charge controller to battery with battery terminals and M8 cable lug Connection
• 1x Dekalin adhesive set with Dekasyl MS-5 polymer adhesive, Dekavator bonding agent, cleaning cloth and operating instructions
• 40A MIDI fuse
• additional for 2 modules: 1x Offgridtec MC4 branching socket & 1x Dekalin Dekasyl MS-5 polymer adhesive

The Offgridtec® MPPT Pro Duo 30A Solar Charge Controller

The MPPT Pro Duo controller can handle a maximum charge current of 30A. This means that this system can theoretically be expanded to almost 400W solar module output - however, taking into account the module selection (expansion only with identical panels), an expansion by a maximum of 1 module would probably make the most sense with this system. In addition, the unit has a secondary charging output that can be used to charge the starter battery in parallel with the on-board battery during longer periods of standing - a feature that is certainly much appreciated in the mobile home. To ensure optimum efficiency, the unit also has an AES switching output - this enables refrigerators with "AES" to be switched automatically from gas to 12 V operation in the event of surplus solar power.

• maximum charging current 30A - 390W module power theoretically usable
• 30A load output for 12V consumers directly at the charge Controller
• the clear remote display allows the controller to be mounted in hard-to-reach places in the vehicle without restricting operation and overview of the system Parameters
• AES control signal for car refrigerator to avoid energy waste
• 100V maximum PV input voltage
• Digital circuit control of adaptive three-stage charging mode to improve battery life
• Max power point tracking technology with ultra-fast tracking speed and guaranteed tracking efficiency of at least 99.5%.
• Dimensions: 24.7cm x 16.5cm x 6.9cm (LxWxH)
• Weight: 1.4KG
• Power consumption: 26mA at 12V
• Active temperature equalisation for optimal charging and ensuring long battery life
• Supports all major battery types (lead acid, AGM, GEL, LiFePo4)
• Max. Efficiency: 98

The 180W OLP solar module with the latest shingle Technology

The 180W OLP solar module (1x or 2x depending on the selection) with PERC technology used in the system is impressive on the one hand due to its unique module design with overlapping wafer arrangement (overlapping design), and on the other hand due to its high module efficiency, which makes this module particularly interesting for applications on vehicles due to the limited space available.

• Module voltage (Vmp): 23,4V
• Max. Current (Imp): 7.69A
• Idle voltage (Voc): 27.61V
• Short-circuit current (Isc): 8.15A
• cell efficiency: 22,68%
• ambient temperature: -40°C - +85°C
• Temperature coefficient power: -0.43%/°C
• Temperature coefficient voltage: -0.34 %/°C
• Temperature coefficient current: -0.05 %/°C
• Weight: 10.42KG
• Dimensions: 1435mm x 670mm x 35mm
• Protection class junction box: IP68 (waterproof)
• Length of pre-assembled connection cables: 55cm
• Pre-assembled connectors: MC4 compatible connectors

The professional solar mounting system

Spoiler profiles are the first choice especially for caravans and motorhomes when it comes to neatly mounting the solar modules. If you mount the modules in the direction of travel, wind noise is no longer an issue (this also applies to alcove vehicles). Due to the closed construction of the spoilers, no branches or similar can get caught under the solar modules.
Dimensions spoiler: L x W x H: 68cm x 8.9cm (of which approx. 3cm support surface module per spoiler) x 6.5cm.

The gluing

A properly executed gluing is superior to any screw connection in the hard use of campers or boats. On painted or GRP surfaces, a strength of more than 4 N/mm2 can be achieved, which would be a value calculated on the glued surface that could never be achieved with a screw connection in the thin aluminium or GRP support layer. This adhesive set enables even a layman to create an absolutely firm connection between spoilers and the respective substrate.

The Dekalin adhesive set contains all the components necessary for even the do-it-yourself installer to create a professional connection. Stainless steel screws for fastening the solar modules are included, as are detailed bonding instructions. In addition, all you need is a standard hand lever press for cartridges and a lint-free cloth.

The ABS mounting profiles

Cable penetrations from the roof into the interior are always quite tricky, as it must be ensured that everything is absolutely tight and remains tight even after years.

After all, even the slightest ingress of water can lead to often irreparable damage to the interior insulation and furnishings. Especially since the dampness is often only noticed quite late. This is why the roof penetrations were developed: The housings are made of the same UV- and weather-resistant material as the mounting brackets offered in the online shop. They are extremely stable and absolutely slip-proof. The wide adhesive edge ensures an optimal seal. The bushings are glued with the adhesive set that you also use to glue on the solar mounting brackets. The enclosures can also be painted to match the surface on which they are to be mounted.

The professional cabling set

All necessary cables are supplied plug & play and are already pre-crimped with specialist tools. So you don't need to buy special pliers for the MC-4 connectors.

Individual system customisation possible on request

We strive to implement every wish of our customers in the best possible way. With the individual requirements of a solar system, this is of course not always 100% possible. Therefore, if you would like to have adjustments made to one of our systems, simply send us an e-mail to info@offgridtec.com - just tell us briefly which system your enquiry relates to, what change you would like (e.g. additional module, colour spoiler, adhesive or bushing, different charge controller, etc.) and you will receive an appropriate offer from our sales team as soon as possible.

Scope of delivery:

1x Offgridtec 4-01-014245-001 Offgridtec® MobileBlack XL 180W 12V MPPT Caravan Solar Power System

or

1x Offgridtec 4-01-014245-002 Offgridtec® MobileBlack XL 360W 12V MPPT Caravan Solar Power System