Safe shopping with solar experts
Fast Shipping
Top choice renowned brands
Customer service:
+49 (0) 8721 91994-00

The PCB-ETFE 100W 39V from Offgridtec (MPN 3-01-010835) belongs to the latest generation of semi-flexible solar panels. The PCB-ETFE class sets completely new standards in terms of stability and reliability thanks to the composition of the highest quality materials. While the front side is based on a Teflon derivative (PTFE), the rear side is made of fiberglass (PCB). In addition, the module works with modern 3-busbar technology. These and other quality features make the PCB-ETFE 100W from Offgridtec a universally applicable top-class product that feels just as at home on boats as it does on vehicle roofs or other surfaces and combines stability, maximum reliability and performance like no other.

Thanks to its high operating voltage of 39.6V, it is ideal for 24V systems or 12V systems (12V only in conjunction with MPPT charge controllers that can process a corresponding maximum module voltage). The PCB-ETFE 100W 39V solar cell is flexible and, compared to normal flexible solar cells, can also be carefully walked on when mounted completely flat.

Features PCB-ETFE 100W 39V solar panel

  • 100W rated power, high efficiency and 3-busbar technology
  • equipped with monocrystalline A-grade solar cells
  • 2 bypass diodes - minimized power drop when shaded
  • higher heat tolerance compared to TPT modules thanks to PCB backsheet, therefore less susceptible to blistering due to poor bonding
  • can be walked on and is even more slip-resistant than comparable solar modules on the market, even when wet
  • easy installation of the solar panel by gluing or using the eyelets
  • unrestricted salt water suitability, universally applicable
  • ETFE high-tech plastic ensures weight savings and high light transmission of max. 96%
  • easy installation thanks to pre-assembled solar cable with MC4 plug and socket
  • proven Offgridtec quality: made exclusively from premium raw materials of the highest quality level
  • 2-year warranty - information on the warranty conditions can be found here

ETFE high-tech plastic on the front side

The front of the solar panel is covered with a high-tech plastic layer based on ethylene tetrafluoroethylene copolymer ETFE - a Teflon derivative (PTFE) - and offers excellent protection against harmful environmental influences and is also suitable for use in salt water. ETFE is lighter and at the same time more translucent than other plastic solutions on the market.

Extremely stable fiberglass (PCB) backing plate

The fiberglass backing (PCB) makes the module significantly more stable than conventional panels with a TPT backing. This structure offers you the following advantages:

  • prevents bubble formation, which can occur with TPT modules due to incorrect bonding
  • tolerates higher temperatures compared to the TPT structure
  • reduces the risk of cell breakage due to accidental overbending of the panel by the user

Technical features PCB-ETFE 100W 39V solar panel

  • Working voltage (Vmp): 39.6 V
  • Open circuit voltage (Voc): 46.61 V
  • max. current (Imp): 2.53 A
  • Short-circuit current (Isc): 2.73 A
  • max. system voltage: 200 V
  • Semi-flexible: Bendable up to max. 18 degrees (lengthwise)
  • Junction box protection class: IP67
  • Dimensions: 845 x 680 x 3 mm
  • Weight: 3.8 kg
  • Part number: 3-01-010835

Application areas of the Offgridtec PCB-ETFE series

  • can be used without restriction in the marine sector
  • ideally suited for mounting on motorhomes, buses and other vehicles
  • for installation on rounded sheet metal roofs
  • recommended for all systems where maximum reliability and performance are required
  • ideally suited for suspending tents when camping, for example; the PCB carrier layer means that the eyelets can also withstand very high mechanical loads

about the PCB-ETFE series

This product is the result of experience gained from thousands of installations in every conceivable area of application. We successfully established our first series of semi-flexible solar cells on the market 7 years ago and have been continuously developing and optimizing our modules ever since. With the PCB-ETFE series, you benefit from this unique expertise and can look forward to a durable product that will reliably produce electricity for many years to come.

Scope of delivery:

Offgridtec 3-01-010835 PCB-ETFE 100W 39V semi-flexible solar panel

Benutzerhinweise semi-flex Solarmodule.pdf Download
Datenblatt-3-01-010835-DE-EN.pdf Download
Garantiebestimmung_semi-flexible_Solarmodule.pdf Download
Category name: Flexible solar cells
Cell efficiency: >21%
Generator output wp: 100 Wp
Humidity: max. 100%
Manufacturer: Offgridtec
Module voltage (VMP): 39,6 V
Open circuit voltage (VOC): 46,61 V
Short circuit current (ISC): 2,73 A
Solarmodul - eyelets: 4 ring eyes
Solar module - bendability: max. 18 degrees (lengthwise)
Solar module - cable length: 0,8 m
Solar module - cell type: monocrystalline
Solar module - diodes installed: 2x IOSQO50 Bypass Diode
Solar module - junction box (IP): IP65 / IP 67
Solar module - number of cells: 72
Solar module - size connection cable: 4mm
System voltage: 24V
Temperature coefficiency: -0.45% / degree Celsius
Tolerance: ±3 %
Weight: 4kg
ean: 4250983255287
max. system voltage (V): 200 V/DC
mpn: 010835

Manufactuerer Information

Offgridtec GmbH

Offgridtec GmbH
Im Gewerbepark 11
84307 Eggenfelden
Germany

Mail: info@offgridtec.com

Tel.: +49 8721 9199400

offgridtec.com Reviews with ekomi.de
Welcher MPPT Laderegler muss hierfür verwendet werden? Einsatzbereich Wohnmobil, Batterie 100 AH
Hier wäre z.B. ein MPPT 75/10 oder 75/15 von Victron passend
Loading products