Offgridtec HomePremium S UPS solar system 8600Wp E-Box-48100R-C 15.4Wh 3-phase with electricity meter
Soon available again
€9,340.14*
€7,848.86**
Extremely versatile complete package
The brand new Offgridtec® HomePremium series is a true all-rounder at an unbeatable price-performance ratio. In addition to the use as usv backup solution with the choice between mains and battery priority, this pv system can be used just as well as a self-consumption system. There are hardly any limits to the performance of this Solarasystem - depending on personal requirements and on request, extensions are possible, both on the module and on the battery side. if a higher output power is required at the inverter, further identical devices can also be added here to increase performance.
In addition to the power electronics, the storage unit and the solar modules, all components required for the connection are also included in the scope of delivery, with the exception of the solar module holder, which must be ordered separately. all other components are plug and play - this means no troublesome plug assembly or the like - connect and you're done.
Parts list - what's inside
- 10x Jinko Tiger 370w solar modules with mono N-type cells or Canadian Solar HiKu cs3l 375w (depending on availability)
- victron Energy 48/5000 MultiPlus-II inverter mpn PMP482505010
- victron Energy mppt SmartSolar charge controller 250/70-Tr
- victron Energy Lynx Distributor for dc distribution and fuse protection
- 2 pcs. 3.5kwh Pylontech us3000c LiFePo4 storage batteries
- 2 pairs Pylontech Bracket / brackets for us3000c LifePo4 battery
- inverter connection cable for connecting the Pylontech batteries to the MultiPlus 48/5000 (2m)
- VE.Can to CAN bus BMS type A cable 1.8m for the connection of the Cerbo gx with the memory
- 3m victron rj45 utp cable for connecting the MultiPlus to the Cerbo gx
- Cerbo gx + gx Touch 50 from victron Energy - the communication center of your system
- 1m battery cable 25mm² m8 terminal to screw terminal connection for connection of the charge controller to the battery
- 1m battery cable 50mm² m8 terminals on both sides for connection of Multiplus and Lynx Distributor
- 10m Offgridtec® professional connection cable 6mm² solar module to charge controller for connection between solar modules and charge controller
- solar connector jacks (pair) - for parallel connection of two strings a modules
- 2 pcs. 5m 6mm² solar connection cable male/female extension to connect the two module strings with the solar connector jacks
- victron 3m vE.Direct cable connection cable for connecting the charge controller to the Cerbo gx
- victron 200a 58v/48v MEGa-Fuse fuse for Multiplus
- Offgridtec 80a 48v MEGa-Fuse fuse for solar charge controller
To established an Enery Storage System (ESS) with the HomePremium System, a respective energy meter with connections is required
- Victrom Power Meter ET112 1-phase max. 100A
- Victron 5m RS485 to USB Interface cable
In order for an ESS to be considered in the pre-configuration, the meter must be purchased beforehand or together with the System!
Solar module depending on availability Jinko or Canadian Solar
Depending on availability, you will receive the Jinko or Canadian Solar module. both modules are perfectly matched to the set, as well as fully compatible with all supplied components. The Jinko Tiger N-type 60tr (mpn JKM370N-6TL3) with 370w and the Canadian Solar HiKu cs3l (mpn 014555) with 375w are equipped with monocrystalline cells and N-type technology. The solar cells use multi-busbar technology, with which the loss due to microcracks has been efficiently reduced, the current transmission path has been reduced by 50%, and the cell efficiency has been improved. The modules are manufactured with the Tiling Ribbon process and Hot 2.0 technology.
The Jinko Solarmodule is certified to withstand wind and snow loads of up to 2400 Pa and 5400 Pa, respectively, as well as high salt and ammonia resistance. for the Canadian Solar, the values are 3600 Pa and 5400 Pa, respectively. The annealed front glass with high light transmission and low iron content has a thickness of 3.2 mm and an anti-reflective coating. The frame has an anodized aluminum alloy.
Data sheets of the respective modules are available via the following links:
Jinko Tiger N-Type 60tr 370w Solar Module Mono Mbb Perc Half Cell Module Tiling Ribbon
Canadian Solar 375w mono solar panel perc HiKu cs3l-375MS
Technical data | Jinko Tiger N Type 60tr | Canadian Solar HiKu cs3l-375MS |
---|---|---|
Power (Pmax) | 370wp | 375wp |
Voltage (vmp) | 34,49v | 34,50v |
Max. Current (Imp) | 10,73a | 11,02a |
Open circuit voltage (voc) | 41,46v | 41,2v |
Short circuit current (Isc) | 11,43a | 11,68a |
Cell efficiency | 21,25% | 20,5% |
operating temperature | -40°C - +85°C | -40°C - +85°C |
Max. System voltage | 1000v/dc | 1000v/dc |
Cell type | N type monocrystalline | N type monocrystalline |
number of cells | 120 (6 x 20) | 120 [2x (10x6)] |
Weight | 19 kg | 21,1 kg |
Dimensions | 1692 x 1029 x 30 mm | 1765 x 1048 x 35mm |
Protection class junction box | IP68 | IP68 |
LiFePo4 storage technology from Pylontech - proven, reliable, safe
the us3000c storage battery from Pylontech is a lithium iron phosphate battery of the latest generation. This modular system guarantees the longest possible service life with maximum safety. In each module there is a battery management system (bms) which provides comprehensive protection against deep discharge and overcharge, as well as against damage due to high currents or too high or too low temperature. Also excluded is a defect of the battery by short circuit or polarity reversal.
Features of the Pylontech us3000c memory modules
- Extremely cycle resistant - over 6000 cycles at 95% DoD (discharge per cycle)
- absolutely intrinsically safe due to integrated protective shutdown (bms)
- High charge and discharge power of up to 5kw per module
- High storage density
- Low weight and compact design
- absolutely maintenance-free and easy to install
- Pylontech grants 10 years warranty on the us3000c
The heart of the plant - the victron MultiPlus-II 48/5000
The Multiplus-II 48/5000/70-50 is a high-end device combination from victron Energy (mpn pmp482505010) that combines classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and Powerassist functions to 100 a and the potential range of use to ess applications, making this device virtually predestined for use in this system. The inverter delivers a whopping 5000 W at non-linear load, or 4000 W at linear continuous load. the 48 V battery charger is also very well proportioned, with 70 A of charging power, and is complemented by a 50 A transfer switch that allows lightning-fast switching between the aC connections.
Features and characteristics of the MultiPlus-II 48/5000
- PowerControl and Powerassist -Increase mains or generator power
- built-in anti-islanding function and connection possibility for external current sensor (optional)
- can be used as backup device in grid-connected systems for power supply in case of grid failures
- can be used in various ess (Energy Storage System) applications
- best suited for use in both Offgridtec and ongrid systems
- vE.bus interface for parallel and three-phase operation, remote monitoring and system integration
- virtually unlimited power through parallel and three-phase operation
- can be configured on-site or remotely using vEConfigure software*
- Approved according to vDE-aR-N 4105
- 5000 w power at non-linear load 4000 w continuous load and 9000 w peak power
- for 48 v battery voltage, 50 a transfer switch and 70 a battery charger
- output voltage: 230 vaC, frequency: 50 Hz
- max. efficiency is 95%, protection class IP22
delivery is configured and adjusted to the supplied components
The adjustment possibilities of the MultiPlus-II are extremely diverse, as are its application possibilities. So that the system, as it is delivered, lives up to the description "Plug and Play", we have already made the most necessary settings for you - the system is therefore immediately ready for use without further configuration.
maximum flexibility thanks to two AC outputs
The main output ensures uninterrupted operation. In the event of a mains failure or an interruption in the shore/generator power, the MultiPlus-II takes over the supply of the connected consumers. Switching is fast enough (less than 20 milliseconds) to ensure uninterrupted operation of computers and other electronic equipment. The second output supplies power only when AC power is available at the input of the MultiPlus-II. loads that must not discharge the battery, such as a water heater, can be connected to this output.
victron Energy Cerbo gx and gx Touch 50 - the communication center of your system
The latest development in system monitoring from vctron Energy makes it easy for you to control and configure your system. rounded off by the gxC Touch 50 - a waterproof 5 inch touch screen - you always have an overview of your system parameters. The Cerbo's features allow you to perfectly control and monitor the system, while maximizing system performance in an unprecedented and easy way.
The corresponding module can be used with both solar charge controllers and grid-tied inverters. The mounting material and the necessary connection cables are of course included in the delivery. With the help of the bluetooth capability of the gx Touch 50, access to your system is ensured even faster and easier. Only optional is a wall mount for the gx Touch 50, which must be ordered separately if required.
The victron Remote Portal (vRM) is a free victron Energy service that allows you to remotely read the data of your system and configure the devices accordingly. So you always have full control and overview of all relevant system parameters even if you are not present. The functionality is available online as a demo version and is ideally suited to give you a first impression - https://vrm.victronenergy.com/landingpage