Offgridtec HomePremium M UPS solar system 12900Wp US5000 19.2kWh 3-phase with electricity meter
Shipped in 2-5 days
€15,270.08*
€12,832.00**
Extremely versatile complete package
The Offgridtec® HomePremium series is a true all-rounder at an unbeatable price-performance ratio. As well as being used as a usv backup solution with a choice between mains and battery priority, this PV system can also be used as a self-consumption system. There are virtually no limits to the performance of this Solarasystem - depending on personal requirements and on request, extensions are possible, both on the module and battery side. if a higher output power is required on the inverter, additional identical devices can also be connected here to increase performance.
In addition to the power electronics, the storage system and the solar modules, all components required for the connection are also included in the scope of delivery, with the exception of the solar module holder, which must be ordered separately. all other components are plug and play - this means no annoying plug installation or the like - connect and you're done. Depending on your choice, the system is supplied with or without an electricity meter.
Parts list - what's inside
- 30x Luxen Solar 430w Full Black Solar panel Luxneri Series 5
- 4 x 4.8kwh Pylontech us5000 LiFePo4 storage batteries
- 1x victron Energy mppt SmartSolar charge controller 450/200 48v
- 3x victron pmp482505010 Multiplus-II 48/5000/70-50a
- 1x Cerbo gx + 1x gx Touch 50 from victron Energy - the communication center of your system
- 1x victron Energy Lynx Distributor for dc distribution and protection
- 1x victron Energy Lynx Power In
- 3x 10m Offgridtec® Professional connection cable 6mm² solar module to charge controller for the connection between solar modules and charge controller
- 2 x Pylontechbattery connection cable set Pylontech to inverter 2 x 2.0m 25mm² amphenol to m8
- 4x 1m battery cable 50mm² m8 eyelets on both sides
- 3x 10m 6mm² mc-4 connection cable
- 1x vE.Can to CaN-Bus bms Type a cable 1.8m aSS030710018 for connecting the Cerbo gx to the memory
- 2x 3m victron rj45 utp cable for connecting the MultiPlus to the Cerbo gx
- 3x Mega fuse 125a / 70v
- 1x Mega fuse 250a / 70a
- 2x 0.9m victron rj45 utp cable
- 1x Pylontech Battery cabinet for us5000
When selecting electricity meter:
Extended use of your HomePremium system
The HomePremium system is supplied either with or without victron electricity meter and cable, whereby an energy meter with connection cable is mandatory for the installation of an Energy Storage System.
With this electricity meter, you can carry out a grid-parallel installation and then monitor your energy consumption and control your energy costs. thanks to phase compensation, you can even use the 3-phase meter for 1-phase systems. This means that seamless integration of decentralized energy sources and consumers into the existing power grid is no problem.
Luxen Solar 430w Full Black solar module
The monocrystalline and bifacial 430w Full Black Series n5 solar module fromLuxen Solarsolar module impresses with a combination of different technologies, such as N-TOPCon cell technology and a 108 half-cell layout. The smbb half-cut cell technology was also used during production to increase performance. The state-of-the-art solar module represents the pinnacle of solar technology, offering impressive power output and low LCOE.
Features
- Glass-glass module
- N-TOPCon cell technology
- smbb Half-Cut cell technology
- Low bos & LCOE
- Bifacial cell module technology
- excellent anti-PID and low lid performance
- 3 bypass diodes
- 30-year performance guarantee and 15-year product guarantee
- high cell efficiency of over 22%
Half-cell technology
In half-cell technology ("half-cut"), conventional silicon cells are cut in half using a laser. The resulting halves are then centrally connected in parallel, which leads to an increased output of the solar module by reducing resistance losses.
Bifacial cells
Bifacial means two-faced. And the name says it all: the Luxen Solar 430w n5 module is also equipped with solar cells on the back, which means that sunlight can be absorbed even better and the efficiency of the overall module is increased.
Technical data
- maximum output: 430w
- Module voltage (vmp): 32.04v
- max. current (imp): 13.42a
- Open circuit voltage (voc): 38.96v
- Short-circuit current (Isc): 14.13a
- Module efficiency: 22.02%
- dimensions: 1722 x 1134 x 30 mm
- Operating temperature range: -40°C to +85°C
- Cells: 108 (6x18)
- max. operating voltage: 1500v dc
- Weight: 23,5kg
LiFePo4 storage technology from Pylontech - proven, reliable, safe
The us3000c storage battery from Pylontech is a latest-generation lithium iron phosphate battery that offers maximum safety and service life. Each module has a battery management system (bms) for comprehensive protection against deep discharge, overcharging and damage caused by high currents or extreme temperatures. Short circuits and reverse polarity are also excluded.
Features of the Pylontech us3000c memory modules
- Extremely cycle-proof - over 6000 cycles at 95% DoD (discharge per cycle)
- absolutely intrinsically safe due to integrated protective shutdown (bms)
- High charging and discharging capacity of up to 5kw per module
- High storage density
- Low weight and compact design
- absolutely maintenance-free and easy to install
- 10-year guarantee
The heart of the system - the victron MultiPlus-II 48/5000
The Multiplus-II 48/5000/70-50 from victron Energy combines classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and Powerassist functions to 100a and enables use in ESS applications.
The setting options on the MultiPlus-II are extremely varied, as are its possible applications. We have already made the most important settings for you so that the system, as it is supplied, lives up to the description "Plug and Play" - the system can therefore be used immediately without any further configuration.
Performance features and characteristics of the MultiPlus-II 48/5000
- PowerControl and Powerassist - increasing mains or generator output
- Built-in anti-islanding function and connection option for external current sensor (optional)
- Can be used as a backup device in grid-connected systems
- vE.Bus interface for parallel and three-phase operation
- Remote monitoring and system integration
- Parallel and three-phase operation
- Approved according to vde-ar-n 4105
Technical data
- 5000 w power with non-linear load - 4000 w continuous load - 9000 w peak power
- For 48 v battery voltage, 50 a transfer switch and 70a battery charger
- output voltage: 230 vaC, frequency: 50 Hz
- Max. efficiency: 95%
- Protection class IP22
Maximum flexibility thanks to two AC outputs
The MultiPlus-II offers uninterrupted operation by automatically taking over the supply to consumers in the event of mains failures or interruptions to the shore/generator power. The switchover takes place in less than 20 milliseconds to ensure continuous operation of electronic devices. A second output supplies power only when alternating current is present at the input of the MultiPlus-II. This makes it possible to connect consumers such as a water heater that should not be discharged from the battery.
Configuration
The MultiPlus-II is supplied unconfigured as standard. You can find the configuration instructions for the system here in the download area. If you would like us to pre-configure the system, we can do this for you for an additional charge. To do this, place the article linked above "Offgridtec pre-configuration" in the shopping cart during the ordering process. In this case, shipping may take 3-5 working days longer until the configuration has been completed.
victron Energy Cerbo gx and gx Touch 50 - the communication center of your system
The latest development in system monitoring from the company allows you to control and configure your system with ease. rounded off by the gxC Touch 50 - a waterproof 5 inch touchscreen - you always have an overview of your system parameters. The Cerbo's functions allow you to control and monitor your system perfectly and maximize system performance in an unprecedentedly simple way.
victron Energy has developed a new system monitor that allows you to easily control and configure your system. The gx Touch 50, a waterproof 5-inch touchscreen, provides a clear overview of your system parameters. The Cerbo module allows you to precisely monitor your system and maximize performance. It is compatible with both solar charge controllers and grid-connected inverters. Mounting material and connection cable are included in the scope of delivery. The Bluetooth function of the gx Touch 50 makes accessing your system even quicker and easier. An optional wall bracket is available.
victron Remote portal
The victron Remote Portal (vRM) is a free victron Energy service that allows you to read out your system data remotely and configure the devices accordingly. This means that you always have full control and an overview of all relevant system parameters, even when you are away. The functionality is available online as a demo version and is ideal for getting a first impression - https://vrm.victronenergy.com/landingpage