Offgridtec® Balkon - Solarmodulset 12V 2x 200W mit dünnem Alu-Rahmen und Metall-Kabelbinder

The mono 200w Black Frame solar module v2 from Offgridtec (mpn 018400) features 11-busbar technology and works with monocrystalline solar cells with a high efficiency of 22.3%. Thanks to its 30v operating voltage, it is ideal for a wide range of applications. This configuration ensures high performance and reduced yield losses due to voltage drops. This is the new and improved version of the popular mono 200w solar module (mpn 010850). In the new version, the solar modules are equipped with both improved solar cells and 11 busbars, which leads to improved light absorption and reduces the effect of partial shading. about the 200w mono solar module v2 proven quality directly from Offgridtec monocrystalline A-grade solar cells Cell efficiency of over 22% 11-busbar technology Frame: black extremely resistant ESG glass makes the module suitable for use even in the most adverse environmental conditions Proven, immediately operational solar module The mono 200w 30v is one of over 40 tried and tested solar panels from the Offgridtec portfolio and benefits from Offgridtec's experience in the manufacture of high-quality 12v and 24v solar cells. Thanks to the extremely resistant solar glass, the module can also be used in very adverse operating conditions. It can withstand storms or extreme cold and heat without any problems and thanks to the monocrystalline A-grade cells, you can expect significant yields even on cloudy days. Monocrystalline modules Monocrystalline solar modules are an advanced form of photovoltaic module made from a single crystal lattice. This crystalline structure enables higher efficiency in the conversion of sunlight into electrical energy compared to other types of solar modules. The monocrystalline cells are characterized by their uniform structure, which enables a more efficient movement of the charge carriers. This leads to better performance, especially in situations where space is limited, as monocrystalline modules have a higher power density. Technical data Output: 200w Rated voltage (vmp): 30.8v Open circuit voltage (voc): 36 v Rated current: 6.50 A Efficiency: 22.30% Short-circuit current (Isc): 6.82 A max. system voltage: 1000 v DC permissible ambient temperature: -40°C - +85°C Dimensions: 1720 x 590 x 35 mm Part number: 3-01-018400 Tolerance: +/-3% Weight: 11,2kg Scope of delivery 1x Offgridtec mono 200w v2 solar module 30v Black Frame

The pcb-etfe 200w solar panel from Offgridtec (mpn 3-01-018415) sets new standards with high-quality materials such as Teflon derivatives at the front, fiberglass at the rear and 11-busbar technology. It is semi-flexible and ideal for 24V systems with an operating voltage of over 30.8v. For 12V systems, mppt charge controllers are required that can handle higher module voltages. These and other quality features make the pcb-etfe 200w from Offgridtec a universally applicable top-class product that feels just as at home on boats as it does on vehicle roofs or other surfaces and combines stability, maximum reliability and performance like no other. This is the improved version of our 200w 39v module (mpn 3-01-010845). This new version offers a lower operating voltage, while the maximum current and short-circuit current have been increased, which indicates an increased efficiency and performance of the module. In the new version, the solar modules are equipped with both improved solar cells and 11 busbars, which leads to improved light absorption and reduces the effect of partial shading. Features of the pcb-etfe 200w 30.8v solar panel Equipped with monocrystalline A-grade solar cells Cell efficiency of over 22.3% 11-busbar technology PCB backsheet Carefully walkable and even more slip-resistant than comparable solar modules, even when wet Semi-flexible - can be bent up to a maximum of 18 degrees (lengthwise) Easy installation of the solar panel by gluing or using the eyelets High light transmission of max. 96% Pre-assembled solar cable with mc4 plug and socket Proven Offgridtec quality Application areas of the Offgridtec pcb-etfe series can be used without restriction in the marine sector ideally suited for mounting on motorhomes, buses and other vehicles for installation on rounded sheet metal roofs recommended for all systems where maximum reliability and performance are required ideally suited for suspending tents when camping, for example, the ring eyelets can also withstand very high mechanical loads thanks to the PCB carrier layer etfe high-tech plastic on the front The front of the solar panel is covered with a high-tech plastic layer based on ethylene tetrafluoroethylene copolymer etfe - a Teflon derivative (ptfe) - and offers excellent protection against harmful environmental influences and is also suitable for use in salt water. etfe is lighter and at the same time more translucent than other plastic solutions on the market. Extremely stable fiberglass (pcb) backing plate The fiberglass (pcb) backing makes the module significantly more stable than conventional panels with a TPT backing. This structure offers you the following advantages: prevents bubble formation, which can occur with TPT modules due to incorrect bonding tolerates higher temperatures compared to the TPT structure reduces the risk of cell breakage due to accidental overbending of the panel by the user about the pcb-etfe series This product is the result of accumulated experience from thousands of installations in every conceivable application. We successfully established our first series of flexible solar cells on the market 5 years ago and have been continuously developing and optimizing our modules ever since. With the pcb-etfe series, you benefit from this unique expertise and can look forward to a durable product that will reliably produce electricity for many years to come. Technical data Generator output: 200 Wp Working voltage (Vmp): 30.8 V Open-circuit voltage (Voc): 36.0 V max. current (Imp): 6.50 A Short-circuit current (Isc): 6.82 A max. system voltage: 200 V Power tolerance: +/- 3% Operating temperature: -40 to +85°C Protection class: IP67 Cells per module: 3 x 18 Size of the cells: 182 x 91mm Module dimensions: 1770 x 595 x 3mm Weight: 5.02 kg Scope of delivery: Offgridtec 3-01-010845 pcb-etfe 200w 30.8v semi-flexible solar panel