Offgridtec 30m protective grid for solar modules black with 100 fastening hooks Bird and marten repellent

The fsp-2 180w is one of the newest models in the fsp-2 family and is also one of the most powerful foldable solar modules in the range. It has a 4-sided design and comes with a matching connection kit, which allows you to quickly and easily connect to the charge controller of your choice and the battery to be charged. The fsp-2 180w can be ordered in three variants. Offgridtec is also happy to customize any fsp module in terms of cable set and charging technology on request. The connection kit is stored in a lockable bag, directly on the module. So you always have a ready to use small power plant at your side. Performance that sets standards The fsp-2 180w Ultra is equipped with American spr back-contact cells from a well-known manufacturer. The cells are completely black, which gives the fsp-2 180w a very modern, high-quality look. The spr cells provide a very high efficiency of the panel and set in conjunction with the low weight and compact dimensions of the fsp-2 panel new standards in this power class. extensive range of applications: excellent usable in the camping area or for expeditions, climbing tours and much more... for vehicles and boats without fixed solar installation ... and numerous other applications in different areas... technical highlights fsp 2 180w ultra foldable solar panel Rated power: 180wp Number of sides: 4 x 45 Wp Module voltage (Vmp): 39,6 V Max. Charge current (Imp): 4,55 A Open circuit voltage (Voc): 46,6 V Short circuit current (Isc): 4,81 A Dimensions closed: 560 x 440 x 30 mm Dimensions open designed: 560 x 1970 x 6 mm Weight: 5,4 kg ETFE coating SunPower high performance cells 6.0m 5mm² connection cable from fsp-2 to solar charge controller with Anderson connector on solar side 0.5m 5mm² connection cable Anderson connector to wire end sleeve (for fixed screw connection to charge controller) 1m battery connection cable solar charge controller to battery with pre-mounted tapping terminals on battery side Short-circuit-proof connection to the battery thanks to integrated flat fuse holder with 15a ato fuse the included Profi-Connection Kit The connection kit included in the scope of delivery offers everything needed for a quick start-up of the mobile solar set. Each fsp-2 has a 6.0m connection cable, which is equipped with a high-quality Anderson connector at the end. Matching to this, a second 0.5m connection cable is included, which is screwed directly to the solar input of the charge controller, and is also equipped with an Anderson connector on the other side. So you can quickly connect or disconnect the controller at any time via the Anderson connectors without having to unscrew the cables from the charge controller. For the connection of the charge controller to your battery, a 1 meter long plug & play connection cable is also included. This is screwed to the battery input of the controller and is equipped with universal crocodile clips on the battery side, which can be conveniently connected to all common battery terminals. In addition, the battery cable has a flat fuse holder with corresponding ato fuse. customizable on request All FSP-2 Ultra panels can be modified and delivered according to your specifications within a very short time. We can also flexibly adjust and adapt the cables to your needs. Just ask us! We look forward to hearing from you. Please contact customer service for any costs that may be incurred. about the fsp-2 series As with all Offgridtec solar module series, great emphasis has been placed on high quality and durability in the fsp series. The fsp 2 180w Ultra uses back-contacted solar cells like those used in our SP high performance series. These cells generate efficiencies of over 22% and are the best currently available on the market. In addition, the complete fsp-2 series is provided with an ETFE coating, which ensures better protection and at the same time guarantees a very high light transmission. Furthermore, we produce our solar modules according to current norms and standards which, together with the high-quality materials, makes our modules high-end products that deliver maximum technical performance even under the most adverse conditions. Scope of delivery 1x Offgridtec FSP-2 180W 12V, 3-01-010760 1x 6m 2x6mm² module Connection with Anderson SB50 connector 1x FSP-2 Connection Kit

The Jinko Tiger Neo N-Type is a 415W solar module with monocrystalline cells and N-type technology. The solar cells use the Super Multi Busbar technology - with this, the loss due to microcracks has been efficiently reduced, the current transmission path reduced by 50% and the cell efficiency improved. The module is manufactured with Hot 2.0 technology. The Jinko solar module is certified for use in wind and snow loads of 2400-5400 Pa, as well as for its high salt and ammonia resistance. The tempered front glass with high light transmission and low iron content has a thickness of 3.2mm and an anti-reflective coating. The frame has an anodised aluminium alloy finish. Features 16 busbars (super multi-busbar technology) High efficiency of 21.00 PID resistance (Excellent anti-PID performance guarantee thanks to optimised mass production processes and material control) Hot 2.0 technology Positive power tolerance of 0~+3% Incl. connection cable Manufacturer's product warranty: 15 years Improved low light performance Improved mechanical resistance to external influences Max. Max. service life even under extreme environmental conditions Super-Multi-Busbar-Technology Busbars are located on each PV module. These are busbars that are permanently printed on each solar cell. They receive the generated direct current and conduct it to the busbars. By using more busbars, Jinko reduces shading, shortens transport distances and reduces resistance in the modules. N-Type Technology Compared to P-type products, N-type cells, which use a different doping technology, perform better in terms of power dissipation. The significant increase in the bifacial factor and the optimisation of the operating temperature also bring a higher power gain. When it comes to the LCOE value (cost of electricity), the analysis result has significantly reduced compared to conventional P-type modules. HOT 2.0-Technology Efficient passivation contact technology is applied in HOT 2.0 cells, which updates micro-nano-tunnelling through the oxide layer and carrier-selective lamination of microcrystalline silicon thin films on the backside. This advanced structure contributes to better passivation performance and electrical conductivity, increasing cell efficiency and power generation performance. Under mass production conditions, the maximum efficiency of the N-type HOT2.0 cell is over 21% and has a wide application prospect in the near future. Technical Data Power (Pmax): 415Wp-Voltage (Vmp): 31.3 V Max. Current (Imp): 13.17 A Open-circuit voltage (Voc): 37.73 V short-circuit current (Isc): 13.91 A cell efficiency: 21.00% Operating temperature: -40°C - +85°C Max. System voltage: 1000/1500VDC (IEC)cell type: N-type monocrystalline Number of cells: 108 (6 x 18) Weight: 22 kg Dimensions: 1722 x 1134 x 30 mm Protection class of junction box: IP68 Frame Color: Black Scope of delivery: 1x Jinko Tiger N-type 415W solar Panel blackframe

Das Jinko Tiger Neo N-Type ist ein 440W starkes Solarmodul mit monokristallinen Zellen und N-Typ-Technologie. Die Solarzellen nutzen die Super-Multi-Busbar-Technologie. Mit dieser wird der Verlust durch Microcracks effizient reduziert, der Stromübertragungsweg um 50% reduziert und die Zelleffizienz verbessert. Das Modul ist mit der Hot 2.0 Technologie gefertigt. Das Jinko Solarmodul ist für den Einsatz unter Wind- und Schneelasten von 2400-5400 Pa. zertifiziert und weisen eine hohe Betsädnigkeit gegen Salz und Ammoniak auf. Es besitzt ein eisenarmes, gehärtetes Frontglas mit hoher Lichtdurchlässigkeit, weist eine dicke von 3,2mm auf und verfügt über eine Antireflexion-Beschichtung. Der Rahmen besteht aus einer eloxierten Aluminiumlegierung. Eigenschaften Super-Multi-Busbar-Technologie PID-Resistenz (Exzellente Anti-PID-Leistungsgarantie dank optimierter Massenproduktionsprozesse und Materialkontrolle) Positive Leistungstoleranz von 0~+3% Hoher Wirkungsgrad von über 22% Hersteller Produktgarantie: 15 Jahre Hot 2.0 Technologie Verbesserte mechanische Widerstandsfähigkeit gegen externe Einflüsse Verbesserte Leistung bei schwachem Licht Super-Multi-Busbar-Technologie Busbars befinden sich auf jedem PV Modul. Es handelt sich dabei um Stromschienen, die auf jeder Solarzelle fest aufgedruckt sind. Sie nehmen den erzeugten Gleichstrom auf und führen diesen zu den Sammelschienen. Durch die Verwendung von mehr Busbars reduziert Jinko die Abschattung, verkürzt die Transportwege und verringert den Widerstand in den Modulen. N-Typ Technologie Im Vergleich zu P-Typ-Produkten schneiden N-Typ-Zellen, die mit einer anderen Dotierungstechnologie eingesetzt werden, bei der Leistungsabnahme besser ab. Die signifikante Erhöhung des Bifazial-Faktors und die Optimierung der Betriebstemperatur bringen auch einen höheren Leistungsgewinn. Wenn es um den LCOE-Wert (Stromgestehungskosten) geht, hat sich das Analyseergebnis im Vergleich zu herkömmlichen P-Typ-Modulen deutlich reduziert. HOT 2.0-Technologie Die effiziente Passivierungskontakttechnologie wird in HOT 2.0-Zellen angewendet, die das Micro-Nano-Tunneln durch die Oxidschicht und die trägerselektive Laminierung von mikrokristallinen Silizium-Dünnschichten auf der Rückseite aktualisiert. Diese fortschrittliche Struktur trägt zu einer besseren Passivierungsleistung und elektrischen Leitfähigkeit bei, wodurch der Wirkungsgrad der Zelle und die Stromerzeugungsleistung erhöht werden. Unter den Bedingungen der Massenproduktion liegt der maximale Wirkungsgrad der N-Typ HOT2.0-Zelle bei über 22% und hat eine breite Anwendungsperspektive in der nahen Zukunft. Technische Daten Leistung (Pmax): 440Wp Spannung (Vmp): 32,81V Max. Strom (Imp): 13,41A Leerlaufspannung (Voc): 39,38V Kurzschlussstrom (Isc): 13,86A Zellenwirkungsgrad: 22,02% Betriebstemperatur: -40°C - +85°C Max. Systemspannung: 1000/1500VDC (IEC) Zelltyp: N-Typ Monokristallin Anzahl Zellen: 108 Gewicht: 22 kg Maße: 1762 x 1134 x 30 mm Schutzart Anschlussdose: IP68 Rahmenfarbe: Schwarz Lieferumfang: 1x Jinko Tiger Neo N-Typ 440W Solarmodul Blackframe

The mono 100w solar module Black Frame v2 from Offgridtec (mpn 018385) works with monocrystalline solar cells with a high efficiency of 22.3%. Thanks to its 23v operating voltage, it is suitable for a wide range of applications. This constitution ensures high performance and reduced yield losses due to voltage drops. This is the new and improved version of the popular mono 100w solar module (mpn 3-01-001245). In the new version, the solar modules are equipped with both improved solar cells and 11 busbars, which leads to improved light absorption and reduces the effect of partial shading. about the Offgridtec mono 100w v2 solar module proven quality directly from Offgridtec manufactured according to the latest standards monocrystalline perc solar cells extremely resistant ESG glass makes the module suitable for use even under the most adverse environmental conditions 2 bypass diodes - minimized power drop when shaded Proven, ready-to-use solar module The mono 100w 23v is one of over 40 tried and tested solar panels from the Offgridtec portfolio and benefits from Offgridtecs experience in the manufacture of high-quality 12v and 24v solar cells. Thanks to the extremely resistant solar glass, the module can also be used in very adverse operating conditions. It can withstand storms or extreme cold and heat without any problems and thanks to the monocrystalline perc cells, you can expect significant yields even on cloudy days. Monocrystalline modules Monocrystalline solar modules are an advanced form of photovoltaic module made from a single crystal lattice. This crystalline structure enables higher efficiency in the conversion of sunlight into electrical energy compared to other types of solar modules. The monocrystalline cells are characterized by their uniform structure, which enables a more efficient movement of the charge carriers. This leads to better performance, especially in situations where space is limited, as monocrystalline modules have a higher power density. Technical data Output (Pmax): 100w Operating voltage (Vmp): 23.9 V Open circuit voltage (Voc): 28 V max. current (Imp): 4.2 A Efficiency: 22,3% NOCT: 45+/2°C Short-circuit current (Isc): 4.4 A max. system voltage: 1000 V permissible ambient temperature: -40°C - +85°C Dimensions: 925 x 590 x 35 mm Part number: 3-01-018385 Weight: 6,22kg Universally applicable Offgridtecs 100w 23v 2V Mono can be used universally, for example in 12 volt Solaranlagen on garden sheds, allotments or for the power supply of lighting applications. But this panel also cuts a fine figure in mobile systems such as mobile home solar systems. Thanks to the integrated bypass diodes, the module can continue to produce electricity even when there is shade or low light. The connection cables are 80 cm long and fitted with MC4 connectors. Scope of delivery 1x Offgridtec® mono 100w v2 solar panel 23v Black Frame

The mono-130 v2 solar module 20v Black Frame from Offgridtec (mpn 018390) works with monocrystalline solar cells with a high efficiency of 22.3%. Thanks to its 20v operating voltage, it is suitable for a wide range of applications. This constitution ensures high performance and reduced yield losses due to voltage drops. This is the new and improved version of the popular mono 130w solar module (mpn 3-01-001250). In the new version, the solar modules are equipped with both improved solar cells and 11 busbars, which leads to improved light absorption and reduces the effect of partial shading. about the Offgridtec Mono-130 v2 solar module proven quality directly from Offgridtec Frame: black manufactured according to the latest standards monocrystalline solar cells positive power tolerance extremely resistant ESG glass makes the module suitable for use even under the most adverse environmental conditions 2 bypass diodes - minimized power drop when shaded 11-busbar technology Proven, immediately operational solar module The mono-130 20v is one of over 40 tried and tested solar panels from the Offgridtec portfolio and benefits from Offgridtecs experience in the manufacture of high-quality 12v and 24v solar cells. Thanks to the extremely resistant solar glass, the module can also be used in very adverse operating conditions. It can withstand storms or extreme cold and heat without any problems and thanks to the integrated bypass diodes, the module can continue to produce electricity even when shaded or in low light. Monocrystalline modules Monocrystalline solar modules are an advanced form of photovoltaic module made from a single crystal lattice. This crystalline structure allows for greater efficiency in converting sunlight into electrical energy compared to other types of solar modules. The monocrystalline cells are characterized by their uniform structure, which enables a more efficient movement of the charge carriers. This leads to better performance, especially in situations where space is limited, as monocrystalline modules have a higher power density. Technical data Output (Pmax): 130W Operating voltage (Vmp): 20.5 V Open circuit voltage (Voc): 24 V max. current (Imp): 6.35 A Tolerance: +/-3% NOCT: 45+/2°C Efficiency: 22.3% Short-circuit current (Isc): 6.66 A max. system voltage: 1000 V permissible ambient temperature: -40°C - +85°C Dimensions: 1165 x 590 x 35 mm Weight: 7,73kg Universally applicable Offgridtec's 20v Mono-130 can be used universally, for example in 12 volt Solaranlagen on garden sheds, allotments or for the power supply of lighting applications. But this panel also cuts a fine figure in mobile systems such as mobile home solar systems. The connection cables are 80 cm long and fitted with MC4 plugs. Scope of delivery 1x Offgridtec® mono-130 v2 solar module 20v Black Frame

The solar module mono 150w v2 Black Frame from Offgridtec (mpn 018395) works with monocrystalline solar cells with a high efficiency of 22.3%. Thanks to its 23v operating voltage, it is ideal for a wide range of applications. This constitution ensures high performance and reduced yield losses due to voltage drops. This is the new and improved version of the popular mono 150w solar module (3-01-001255). In the new version, the solar modules are equipped with both improved solar cells and 11 busbars, which leads to improved light absorption and reduces the effect of partial shading. about the 150w 23v mono solar module v2 Frame: black proven quality directly from Offgridtec manufactured according to the latest standards positive performance tolerance monocrystalline solar cells extremely resistant ESG glass makes the module suitable for use even under the most adverse environmental conditions 2 bypass diodes - minimized power drop when shaded Proven, ready-to-use solar module The mono 150w 23v is one of over 40 tried and tested solar panels from the Offgridtec portfolio and benefits from Offgridtecs experience in the manufacture of high-quality 12v and 24v solar cells. Thanks to the extremely resistant solar glass, the module can also be used in very adverse operating conditions. It can withstand storms or extreme cold and heat without any problems and thanks to the integrated bypass diodes, the module can continue to produce electricity even when shaded or in low light. Monocrystalline modules Monocrystalline solar modules are an advanced form of photovoltaic module made from a single crystal lattice. This crystalline structure allows for greater efficiency in converting sunlight into electrical energy compared to other types of solar modules. The monocrystalline cells are characterized by their uniform structure, which enables a more efficient movement of the charge carriers. This leads to better performance, especially in situations where space is limited, as monocrystalline modules have a higher power density. Technical data Output (Pmax): 150 W Operating voltage (vmp): 23.9 v Tolerance: +/-3% Open circuit voltage (voc): 28 v NOCT: 45+/-2°C max. current (imp): 6.28 A Short-circuit current (Isc): 6.59 A max. system voltage: 1000 v DC Efficiency: 22.3% permissible ambient temperature: -40°C - +85°C Dimensions: 1350 x 590 x 35 mm Weight: 8,9kg Universally applicable Offgridtec' s 150w 23v Mono can be used universally, for example in 12 volt Solaranlagen on garden sheds, allotments or for the power supply of lighting applications. But this panel also cuts a fine figure in mobile systems such as mobile home solar systems. The connection cables are 80 cm long and fitted with MC4 plugs. Scope of delivery 1x Offgridtec mono 150w v2 solar module 23v Black Frame

The Offgridtec olp 150w v2 (mpn 018480) is a powerful solar module in a full-black design. It offers optimized light output and a compact design that enables flexible installations. With its overlapping wafer design and advanced PERC technology, it guarantees outstanding performance and is ideal for versatile applications that require a powerful energy source. It is the improved version of the popular olp 155w 12v solar module (mpn 3-01-011075). The higher short-circuit current improves module performance, while the increased system voltage of 1000 vdc enables integration into new and existing solar systems. In the new version, the solar modules are equipped with both improved solar cells and 11 busbars, which leads to improved light absorption and reduces the effect of partial shading. Unique features of the olp series from Offgridtec® Unique module design with overlapping wafer arrangement (overlapping design) Innovative PERC technology Less loss with partial shading Modern, homogeneous optics without visible conductor tracks High performance with small dimensions Cell efficiency of over 22.68% Overlapping design Overlapping in the wafer design of monocrystalline solar modules is crucial for their extraordinarily high module efficiency. It enables more precise use of the available surface area, minimizes power losses through reduced lead resistance and limits material losses during production. The targeted arrangement of the wafers effectively minimizes empty spaces between them, thereby increasing the power density and optimizing the overall efficiency of the modules. This method is therefore particularly advantageous for Solaraapplications in rooms with limited space, as it maximizes energy generation per unit area. Innovative PERC technology PERC technology, also known as Passivated Emitter Rear Cell or rear-side passivation, is a key technology in Offgridtec olp solar modules that increases the efficiency of solar cells. It creates a dielectric layer between the conventional aluminium metallization and the silicon wafer layer on the back of the cell. A laser is applied to this layer to create tiny holes. This dielectric layer reflects light, which normally penetrates through to the rear side without generating charge carriers, back into the solar cell. This gives photons an extra chance to generate electricity. PERC technology improves efficiency across different wavelengths, increases the likelihood of electrons contributing to electricity generation and helps to reduce system costs and increase energy yield per unit area. Technical data: Generator output: 150 Wp Module voltage (Vmp): 19.4 V Max. Current (Imp): 7.74 A Open circuit voltage (Voc): 22.90 V Short-circuit current (Isc): 8.20 A Max. System voltage: 1000v DC Cell type: Monocrystalline PERC Power tolerance: +/- 3% Operating temperature: -40 to +85°C Cells per module: 3 x 34 Cell size: 210 x 33.7mm Accessories: xc802 + 0.9m cable + MC4 Dimensions: 670 x 1195 x 35mm Weight: 9.8 kg Scope of delivery: 1x Offgridtec® olp 150w v2 solar panel 12v shingle technology PERC

The Trina solar Vertex s+ (mpn: tsm-neg9r.28) is an effective solar module with an output of 445w that uses monocrystalline TOPCon cells and dual-glass technology. Thanks to the multi-busbar technology, it offers improved absorption, low series resistance, improved current dissipation and reliability. It is certified for extreme wind and snow loads of 5400 - 4000 Pa and has highly transparent, 1.6 mm thick glass with anti-reflective coating. The frame is made of a 30 mm wide, anodized aluminium alloy.Product highlights of the Trina Vertex s+ moduleMulti-busbar technologyDual glass designHigh-density cell connection technologyN-type i-TOPCon cell technologyvery low degradationHigh efficiency of 22.3%Manufacturer product guarantee: 25 yearsUniversal solution for residential and C and I roofsIncl. connection cable (4.0mm²)N-TOPCon cell technologyThe advanced TOPCon technology (Tunnel Oxide Passivated Contact) is a further development of PERC technology and aims to increase the efficiency of solar cells. The solar modules are provided with an ultra-thin oxide layer and a subsequent conductive layer, which leads to a so-called passivated contact. As a result, the performance of the solar cell is improved in low light conditions, leading to higher annual energy production.Dual glass designThe solar module is equipped with an improved dual glass, which makes it less susceptible to micro-cracks and scratches on the back during installation. This gives it increased mechanical resistance and strength. It is particularly suitable for use in coastal areas, in high temperatures and high humidity and in demanding environments. Other great features:Outstanding fire resistanceResistance to weatheringResistance to salt spray, sand dust or ammoniaMulti-busbar technologyEach PV module has busbars that act as busbars and are permanently connected to each solar cell. they collect the generated direct current and transmit it to the busbars. Trina solar uses a larger number of busbars to reduce shadow effects, shorten transport distances and minimize resistance in the modules.Universal solution for residential and CundI roofsThe module has been designed so that it can be easily integrated into existing inverters and various mounting systems. It is also optimally dimensioned and lightweight, which makes it easier to handle and install. For this reason, the Vertex s is the ideal solution for roofs with limited load-bearing capacity.Technical dataPower (Pmax): 445 Wvoltage (Vmp): 44.3 VMax. current (Imp): 10.05 AOpen circuit voltage (Voc): 52.6 VShort-circuit current (Isc): 10.71 AOperating temperature: -40°C - +85°CMax. system voltage: 1500 V DCMax. Fuse protection: 20ACell efficiency: 22.3%Number of cells: 144degree of protection junction box: IP68Dimensions: 1762 x 1134 x 30 mmWeight: 21.1 kgScope of delivery:1x Trina solar 445w Vertex s+ double glass N-Type TopCon solar module