Longi Hi-Mo-6 430W Solarmodul LR5-54HTH Black Frame

The Jinko Tiger Neo N-Type is a 415W solar module with monocrystalline cells and N-type technology. The solar cells use the Super Multi Busbar technology - with this, the loss due to microcracks has been efficiently reduced, the current transmission path reduced by 50% and the cell efficiency improved. The module is manufactured with Hot 2.0 technology.

The Jinko solar module is certified for use in wind and snow loads of 2400-5400 Pa, as well as for its high salt and ammonia resistance. The tempered front glass with high light transmission and low iron content has a thickness of 3.2mm and an anti-reflective coating. The frame has an anodised aluminium alloy finish.

Features

• 16 busbars (super multi-busbar technology)
• High efficiency of 21.00
• PID resistance (Excellent anti-PID performance guarantee thanks to optimised mass
• production processes and material control)
• Hot 2.0 technology
• Positive power tolerance of 0~+3%
• Incl. connection cable
• Manufacturer's product warranty: 15 years
• Improved low light performance
• Improved mechanical resistance to external influences
• Max. Max. service life even under extreme environmental conditions

Super-Multi-Busbar-Technology

Busbars are located on each PV module. These are busbars that are permanently printed on each solar cell. They receive the generated direct current and conduct it to the busbars. By using more busbars, Jinko reduces shading, shortens transport distances and reduces resistance in the modules.

N-Type Technology

Compared to P-type products, N-type cells, which use a different doping technology, perform better in terms of power dissipation. The significant increase in the bifacial factor and the optimisation of the operating temperature also bring a higher power gain. When it comes to the LCOE value (cost of electricity), the analysis result has significantly reduced compared to conventional P-type modules.

HOT 2.0-Technology

Efficient passivation contact technology is applied in HOT 2.0 cells, which updates micro-nano-tunnelling through the oxide layer and carrier-selective lamination of microcrystalline silicon thin films on the backside. This advanced structure contributes to better passivation performance and electrical conductivity, increasing cell efficiency and power generation performance. Under mass production conditions, the maximum efficiency of the N-type HOT2.0 cell is over 21% and has a wide application prospect in the near future.

Technical Data

• Power (Pmax): 415Wp-Voltage (Vmp): 31.3 V
• Max. Current (Imp): 13.17 A
• Open-circuit voltage (Voc): 37.73 V
• short-circuit current (Isc): 13.91 A
• cell efficiency: 21.00%
• Operating temperature: -40°C - +85°C
• Max. System voltage: 1000/1500VDC (IEC)cell type: N-type monocrystalline
• Number of cells: 108 (6 x 18)
• Weight: 22 kg
• Dimensions: 1722 x 1134 x 30 mm
• Protection class of junction box: IP68
• Frame Color: Black

Scope of delivery:

1x Jinko Tiger N-type 415W solar Panel blackframe