Lappkabel h1z2z2-k 1x10mm² wh/bk solar cable by the meter

Lapp ÖLFLEX SOLAR H1Z2Z2-K cables are weather-, abrasion-, and UV-resistant photovoltaic cables. These halogen-free, double-insulated, cross-linked solar cables are suitable for continuous outdoor use for connecting grounded and ungrounded photovoltaic systems. They are used for interconnecting solar modules as well as connecting module strings and inverters. The cable is TÜV Rheinland certified according to 2 PfG 1169/08.2007 (PV1-F) type testing.

This product is sold by the meter. Each unit corresponds to one meter. For example, if you purchase 10 units of this item, you will receive a single piece measuring 10m in length.

Key Product Features:

Conductor cross-section: 10mm²
Manufacturer: Lapp Kabel
Outer insulation color: Black

ÖLFLEX H1Z2Z2 solar cables from Lapp can generally be installed in suitable protective conduits in the ground if it is ensured that there is no permanent contact with water and that standing water is reliably drained. The installation of the cables in the ground, as well as the proper construction of the cable trench, must comply with VDE 0100 Part 520 or equivalent standards to prevent damage to the protective conduit and the cables' long-term exposure to penetrating water. Prolonged, permanent storage and continuous operation of the cables in or under water are not permitted.

Conductor Construction

1. Conductor: Fine-stranded tinned copper wires, according to IEC 60228, Class 5
2. Core insulation: Electron-beam cross-linked polyolefin copolymer
3. Outer sheath: Electron-beam cross-linked polyolefin copolymer

Electrical Properties

Rated voltage: U0/U according to IEC AC 1000/1000 V - DC 1500/1500 V
Max. permissible system voltage: 1.8 kV DC (conductor/conductor, ungrounded system) according to TÜV 2 PfG 1169/08.2007
Test voltage AC 6.5 kV - DC 15 kV

Thermal Properties

Temperature range when fixed: -40° C to +120° C max. conductor temperature (according to EN 60216-2)
Temperature range when fixed: -40 °C to +90 °C ambient temperature (according to TÜV 2 PfG 1169/08.2007)
Installation temperature, flexible: max. -25 °C
Heat pressure resistance according to EN 60811-3-1
Humidity-heat test according to EN 60068-2-78 at 85% humidity

Mechanical Properties

Minimum bending radius for occasional movement: 4x outer diameter
Minimum bending radius when fixed: 5x cable diameter
Dynamic penetration according to DKE requirement profile PV1-F AK 411.2.3 Annex F
Tear resistance according to DKE requirement profile PV1-F AK 411.2.3 Annex G
Test of tensile strength and elongation according to EN 60811

Chemical Properties

Weather/UV resistance according to EN 50618
Ozone resistance according to EN 50396, Method B
Halogen-free according to EN 50267, EN 50525-1
Fire behavior flame-retardant according to IEC 60332-1-2
Acid and alkali resistance according to EN 60811-404 (oxalic acid and caustic soda)

Scope of Delivery

1x 1m Lapp ÖLFLEX solar cable H1Z2Z2-K 1X10 WH/BK