Kemo m120 infrared spotlight for ccd cameras
With the Kemo m120 infrared spotlight, objects are visible to ccd cameras even in complete darkness. For humans, the infrared light is invisible, ccd cameras can see well with an infrared spotlight. Ideal for more "inconspicuous" observation of house entrances, driveways, etc.
Note on operation
ccd cameras have different sensitivity. Therefore, the range of the infrared spotlight may be different, depending on the sensitivity of the camera. This infrared spotlight should only be used in complete darkness, without extraneous light influence. Reason: many cameras have a light sensor that regulates the sensitivity of the camera depending on the brightness of the day. This light sensor responds preferentially to visible light. So if there is another, weak light source (candle, monitor screen or similar), the sensor will immediately regulate the camera's sensitivity back and you will have the impression that the spotlight has almost no effect.
Technical data
- Operating voltage: 12-15 v/dc
- Power consumption: <300mA
- Range: approx. 5m
- Wavelength: approx. 875 nm
- Dimensions: approx. 72 x 50 x 18 mm (with LEDs)
Commissioning:
The infrared spotlight must be mounted in a weather-protected location. For operation either a rechargeable battery 12 v/dc or a stabilized power supply with an output voltage between 12-15 v/dc is suitable. The power supply must have an output of at least 300mA. The spotlight has its maximum power at an operating voltage between 12 and 15 v/dc. If the operating voltage is too low, the performance of the headlamp will drop significantly. If the operating voltage is too high (>15 v/dc), the unit will generate too much heat and may become defective.
Scope of delivery:
1x Kemo m120 infrared spotlight for ccd cameras
Manufactuerer Information
Kemo Electronic
Kemo-Electronic GmbH
Leher Landstr. 20
27607 Geestland
Germany
Mail: info@kemo-electronic.de
Tel.: +49 4743 93380