Growatt tpm-ct-e-eu 250a electricity meter 3-phase smart meter

The Growatt sph5000tl3 bh-up hybrid inverter is a state-of-the-art solution for solar projects. With intelligent load management, a wide battery voltage range of 100-550 v and a VPP interface, it offers flexibility and efficiency. The inverter supports Solaranlagen with a total output of up to 7500 w and enables an uninterruptible power supply. With these features, the sph5000tl3 bh-up is the ideal solution for flexible and reliable Solaranlagen. about the sph5000tl3 bh-up inverter 100% three-phase asymmetrical output Intelligent power control at phase level Wide battery voltage range 100-550 v UPS function (ups) with 10ms switching time VPP interface Scalable system configuration DC/AC type ii SPD DC/AC ratio up to 1.5 Two MPP trackers (Maximum Power Point) Supports lithium and lead-acid batteries Hybrid inverter In contrast to conventional inverters, hybrid inverters offer the option of not only feeding the solar power generated into the grid, but also storing it in batteries. This means that the stored solar power can be used even when the sun is not shining. Another function of hybrid inverters is to optimize a household's electricity consumption by preferring to use the solar power generated directly in the household before it is fed into the grid. This leads to a reduction in energy costs and less dependence on expensive grid electricity. Operating modes - configurable according to system requirements Online mode Different operating modes can be set for optimum system integration of the sph inverter. When entered directly on the device, a priority mode can only be set for one time period. When using the online platform, up to three time periods can be set for the priority mode (a chargeable accessory is required to use this function). Load first:With the standard "Load first" mode, the connected loads (consumers) are supplied with energy first. As soon as the PV energy is sufficient for the load, the surplus energy is fed into the battery. If the battery is fully charged or none is connected, the remaining energy is fed into the grid. Battery first:In this mode, the inverter first fully charges the battery with the maximum possible solar power. If the PV power is not sufficient, the grid charging function can also be activated. Grid first:In this mode, the PV energy generated is fed into the grid first. The on and off time of the mode can be set here, as well as the power rate. Backup mode: If there is no longer any mains voltage at the device, e.g. due to a short-term power failure or blackout, the Growatt sph automatically switches to backup mode. This ensures that the AC output is supplied via the EPS-LOAD connection. The required energy is only supplied via the Solarasystem and the battery. If the PV system also fails, the battery secures the AC supply until it is discharged. If required, the automatic switch to this mode can also be deactivated. Maximum Power Point Tracking By using Maximum Power Point Tracking (mppt) technology, a Solarasystem can achieve the optimum yield. The MIC inverter is equipped with mppt, which adjusts the optimum ratio of voltage and current throughout the day according to the solar radiation and the module temperature of the solar modules. With its wide mppt voltage range, many solar modules can be connected, enabling efficient energy generation. This advantage is particularly evident when the sky is partly cloudy and the light intensity is constantly changing. Intelligent load management The inverter's integrated smart load control enables precise and efficient control of energy consumption. By using a potential-free contact, electrical loads can be controlled intelligently and prioritized. This function enables automatic detection of energy requirements and optimum use of the available energy. Smart load management ensures optimum distribution of energy and thus contributes to efficient use. With intelligent load control via the dry contact, the inverter is able to optimize the energy flow and ensure efficient operation of your Solarasystem. Growatt monitoring platform By using the optional accessories of the Shine series, you can use the Growatt monitoring platform. This platform is available as a smartphone app for iOS and Android as well as a web version. The Shine accessories must be purchased separately, but use of the platform is free of charge. you can configure and monitor all your Growatt products via Shine, and it also allows you to view self-consumption and track trends. The following Shine options are compatible with the sph series: ShineWiFi-X ShineLink-X Shine4G-X ShineMaster Technical data Recommended module power: up to 7500 w Max. DC voltage: 1000V Starting voltage: 120 V mppt voltage range: 120-1000 V/600 V Battery voltage range: 100~550V Max. Charge/discharge current: 25 A Continuous charging/discharging power: 5000 W AC rated power: 5000 W Max. Apparent power: 5000 VA Max. AC output power: 5000 W Max. Output current: 7.6 A Nominal AC voltage range: 230/400 v (310~476 V) AC mains frequency range: 50/60 Hz (45Hz-55Hz/55Hz-65Hz) Enclosure rating: IP65 Manufacturer's warranty: 10 years Maximum efficiency of 97.8 Dimensions: 505 x 453 x 198 mm Weight: 30 kg Scope of delivery 1x Growatt sph5000tl3 bh-up inverter

The Growatt sph6000tl3 bh-up hybrid inverter is a state-of-the-art solution for solar projects. With intelligent load management, a wide battery voltage range of 100-550 v and a VPP interface, it offers flexibility and efficiency. The inverter supports Solarasystems with a total output of up to 9000 w and enables an uninterruptible power supply. With these features, the sph6000tl3 bh-up is the ideal solution for flexible and reliable Solaranlagen. about the sph6000tl3 bh-up inverter 100% three-phase asymmetrical output Intelligent power control at phase level Wide battery voltage range 100-550 v UPS function (ups) with 10ms switching time VPP interface Scalable system configuration DC/AC type ii SPD DC/AC ratio up to 1.5 Two MPP trackers (Maximum Power Point) Supports lithium and lead-acid batteries Intelligent load control via dry contact Hybrid inverter In contrast to conventional inverters, hybrid inverters offer the option of not only feeding the solar power generated into the grid, but also storing it in batteries. This means that the stored solar power can be used even when the sun is not shining. Another function of hybrid inverters is to optimize a household's electricity consumption by preferring to use the solar power generated directly in the household before it is fed into the grid. This leads to a reduction in energy costs and less dependence on expensive grid electricity. Operating modes - configurable according to system requirements Online mode Different operating modes can be set for optimum system integration of the sph inverter. When entered directly on the device, a priority mode can only be set for one time period. When using the online platform, up to three time periods can be set for the priority mode (a chargeable accessory is required to use this function). Load first:With the standard "Load first" mode, the connected loads (consumers) are supplied with energy first. As soon as the PV energy is sufficient for the load, the surplus energy is fed into the battery. If the battery is fully charged or none is connected, the remaining energy is fed into the grid. Battery first:In this mode, the inverter first fully charges the battery with the maximum possible solar power. If the PV power is not sufficient, the grid charging function can also be activated. Grid first:In this mode, the PV energy generated is fed into the grid first. The on and off time of the mode can be set here, as well as the power rate. Backup mode: If there is no longer any mains voltage at the device, e.g. due to a short-term power failure or blackout, the Growatt sph automatically switches to backup mode. This ensures that the AC output is supplied via the EPS-LOAD connection. The required energy is only supplied via the Solarasystem and the battery. If the PV system also fails, the battery secures the AC supply until it is discharged. If required, the automatic switch to this mode can also be deactivated. Maximum Power Point Tracking By using Maximum Power Point Tracking (mppt) technology, a Solarasystem can achieve the optimum yield. The MIC inverter is equipped with mppt, which adjusts the optimum ratio of voltage and current throughout the day according to the solar radiation and the module temperature of the solar modules. With its wide mppt voltage range, many solar modules can be connected, enabling efficient energy generation. This advantage is particularly evident when the sky is partly cloudy and the light intensity is constantly changing. Intelligent load management The inverter's integrated smart load control enables precise and efficient control of energy consumption. By using a potential-free contact, electrical loads can be controlled intelligently and prioritized. This function enables automatic detection of energy requirements and optimum use of the available energy. Smart load management ensures optimum distribution of energy and thus contributes to efficient use. With intelligent load control via the dry contact, the inverter is able to optimize the energy flow and ensure efficient operation of your Solarasystem. Growatt monitoring platform By using the optional accessories of the Shine series, you can use the Growatt monitoring platform. This platform is available as a smartphone app for iOS and Android as well as a web version. The Shine accessories must be purchased separately, but use of the platform is free of charge. you can configure and monitor all your Growatt products via Shine, and it also allows you to view self-consumption and track trends. The following Shine options are compatible with the sph series: ShineWiFi-X ShineLink-X Shine4G-X ShineMaster Technical data Recommended module power: up to 9000 w Max. DC voltage: 1000V Starting voltage: 120 V mppt voltage range: 120-1000 V/600 V Battery voltage range: 100~550V Max. Charge/discharge current: 25 A Continuous charging/discharging power: 6000 W AC rated power: 6000 W Max. Apparent power: 6000 VA Max. AC output power: 6000 W Max. Output current: 9.1 A Nominal AC voltage range: 230/400 v (310~476 V) AC mains frequency range: 50/60 Hz (45Hz-55Hz/55Hz-65Hz) Enclosure rating: IP65 Manufacturer's warranty: 10 years Maximum efficiency of 98.0 Dimensions: 505 x 453 x 198 mm Weight: 30 kg Scope of delivery 1x Growatt sph5000TL3 bh-up inverter

The Growatt sph7000tl3 bh-up hybrid inverter is a state-of-the-art solution for solar projects. With intelligent load management, a wide battery voltage range of 100-550 v and a VPP interface, it offers flexibility and efficiency. The inverter supports Solarasystems with a total output of up to 10.5 kW and enables an uninterruptible power supply. With these features, the sph7000tl3 bh-up is the ideal solution for flexible and reliable Solaranlagen. about the sph7000tl3 bh-up inverter 100% three-phase asymmetrical output Intelligent power control at phase level Wide battery voltage range 100-550 v UPS function (ups) with 10ms switching time VPP interface Scalable system configuration DC/AC type ii SPD DC/AC ratio up to 1.5 Two MPP trackers (Maximum Power Point) Supports lithium and lead-acid batteries Intelligent load control via dry contact Hybrid inverter In contrast to conventional inverters, hybrid inverters offer the option of not only feeding the solar power generated into the grid, but also storing it in batteries. This means that the stored solar power can be used even when the sun is not shining. Another function of hybrid inverters is to optimize a household's electricity consumption by preferring to use the solar power generated directly in the household before it is fed into the grid. This leads to a reduction in energy costs and less dependence on expensive grid electricity. Operating modes - configurable according to system requirements Online mode Different operating modes can be set for optimum system integration of the sph inverter. When entered directly on the device, a priority mode can only be set for one time period. When using the online platform, up to three time periods can be set for the priority mode (a chargeable accessory is required to use this function). Load first:With the standard "Load first" mode, the connected loads (consumers) are supplied with energy first. As soon as the PV energy is sufficient for the load, the surplus energy is fed into the battery. If the battery is fully charged or none is connected, the remaining energy is fed into the grid. Battery first:In this mode, the inverter first fully charges the battery with the maximum possible solar power. If the PV power is not sufficient, the grid charging function can also be activated. Grid first:In this mode, the PV energy generated is fed into the grid first. The on and off time of the mode can be set here, as well as the power rate. Backup mode: If there is no longer any mains voltage at the device, e.g. due to a short-term power failure or blackout, the Growatt sph automatically switches to backup mode. This ensures that the AC output is supplied via the EPS-LOAD connection. The required energy is only supplied via the Solarasystem and the battery. If the PV system also fails, the battery secures the AC supply until it is discharged. If required, the automatic switch to this mode can also be deactivated. Maximum Power Point Tracking By using Maximum Power Point Tracking (mppt) technology, a Solarasystem can achieve the optimum yield. The MIC inverter is equipped with mppt, which adjusts the optimum ratio of voltage and current throughout the day according to the solar radiation and the module temperature of the solar modules. With its wide mppt voltage range, many solar modules can be connected, enabling efficient energy generation. This advantage is particularly evident when the sky is partly cloudy and the light intensity is constantly changing. Intelligent load management The inverter's integrated smart load control enables precise and efficient control of energy consumption. By using a potential-free contact, electrical loads can be controlled intelligently and prioritized. This function enables automatic detection of energy requirements and optimum use of the available energy. Smart load management ensures optimum distribution of energy and thus contributes to efficient use. With intelligent load control via the dry contact, the inverter is able to optimize the energy flow and ensure efficient operation of your Solarasystem. Growatt monitoring platform By using the optional accessories of the Shine series, you can use the Growatt monitoring platform. This platform is available as a smartphone app for iOS and Android as well as a web version. The Shine accessories must be purchased separately, but use of the platform is free of charge. you can configure and monitor all your Growatt products via Shine, and it also allows you to view self-consumption and track trends. The following Shine options are compatible with the sph series: ShineWiFi-X ShineLink-X Shine4G-X ShineMaster Technical data Recommended module output: up to 10.5 kW Max. DC voltage: 1000V Starting voltage: 120 V mppt voltage range: 120-1000 V/600 V Battery voltage range: 100~550V Max. Charge/discharge current: 25 A Continuous charging/discharging power: 7000 W Rated AC power: 7000 W Max. Apparent power: 7000 VA Max. AC output power: 7000 W Max. Output current: 10.6 A Nominal AC voltage range: 230/400 v (310~476 V) AC mains frequency range: 50/60 Hz (45Hz-55Hz/55Hz-65Hz) Enclosure rating: IP65 Manufacturer's warranty: 10 years Maximum efficiency of 98.2 Dimensions: 505 x 453 x 198 mm Weight: 30 kg Scope of delivery 1x Growatt sph7000tl3 bh-up inverter

The Growatt mod 3ktl3-xh BP hybrid inverter (mpn mod 3ktl3-xh bp) is a 3-phase inverter that ensures simple and user-friendly operation of large Solarasystems thanks to its high output and compact size. The inverter is characterized by a high efficiency of 98.3 %, which makes it a powerful and flexible device when configuring a system. In addition to 2 independent mppt inputs and a maximum PV power of 6000w, the inverter also has an OLED touch display, which is a great advantage for simple and uncomplicated operation. Loads and batteries can also be connected. The apx battery system is compatible with this. Optionally, the mod-xh-BP series can be equipped with the SYN 50 xh 30 - backup boxto achieve off-grid operation. The mod-xh-BP series: 2 independent mppts Battery-ready, future-proof Type ii spd on dc and ac side Integrated afci function Support for export limitation OLED and touch button DC/AC ratio up to 2.0 Off-grid function possible with optional accessories Hybrid inverter In contrast to conventional inverters, hybrid inverters can not only feed the electricity generated by the Solarasystem into the power grid, but also store it in batteries. This means that solar power is also available when the sun is not shining. Another feature of hybrid inverters is their ability to optimize a household's electricity consumption by preferring to use the solar power directly in the household before it is fed into the grid. Active safety with afci function With an Arc Fault Circuit Interrupter is an arc fault protection device. It protects circuits in the event of arcing faults and acts as a circuit breaker against contact faults in low-voltage installations. I n addition to providing protection, it analyses current and voltage curves using digital signal processing and interrupts circuits in the event of fault signatures. The afci is also known colloquially as a fire protection switch, as overheating at poor contact points or flashovers between two conductors can be prevented by emitted signals. Two MPP trackers for optimum solar yields Maximum Power Point Tracker technology is used to generate the best possible yield from a Solarasystem. The mppt determines the optimum ratio between irradiance, module temperature and solar cell type over the course of the day. The two MPP trackers in the mod inverter allow the optimum operating point for the two PV strings to be optimized separately. The two trackers work independently of each other and so, for example, shading on one string would have no effect on the second. Operating modes - configurable according to system requirements Operating mode: The mod-xh-BP converts the DC power from PV strings into AC power and feeds this into the grid. As soon as the output power does not meet the requirements for grid-connected power generation, the normal operating mode is switched off. Fault mode: The inverter monitors and controls the status of the system in real time. If, for example, system or inverter errors occur, the display shows the error information and disconnects the inverter output from the grid. Switch-off mode: The inverter switches off automatically when solar radiation is weak or absent. AC&DC type ii spd AC and dc type ii spds (surge protective devices) protect grid inverters from overvoltages and are an important component for the safety and reliability of Solarasystems. AC spds protect the AC side and dc spds protect the DC side of the inverter. These protective devices discharge excess voltage pulses that can be caused by lightning strikes, switching operations in the power grid or other events. Numerous protective functions dc / AC surge arrester: type ii dc reverse polarity protection and disconnector Insulation resistance detection AC short-circuit protection Mains, residual current and string monitoring Stand-alone grid detection afci protection (arc fault detection) Growatt monitoring platform (can be used with optional accessories) The Growatt monitoring platform can be used with the optional Shine series accessories. This is available as a smartphone app (for iOS and Android) and as a web version. The Shine accessories must be purchased separately, use of the platform is free of charge. you can configure and monitor all your Growatt products via Shine, and it is also possible to display self-consumption and trends. The following Shine options are compatible with the mod 3-15KTL3-X/xh series: ShineWiFi-X Shine4G-X ShineLan-X ShineLink-X Technical data Input (DC) Max. PV line: 6000W Max. Input voltage: 1100V Start voltage: 160V Rated voltage: 600V mppt-Spannungsbereich: 140-1000V Max. Input current per mppt: 16A Max. Short-circuit current per mppt: 20A Input (dc battery) Compatible with ark xh battery system Operating voltage range: 600-950V Max. Operating current: 11A Max. Charging power: 6000W Max. Discharge power: 3300W Output (AC) AC rated power: 3000W AC rated voltage range: 220v/380v, 230v/400v (340-44V0) Frequency range: 50/60 Hz (45-55Hz/55-65Hz) Max. Output current: 5A General Max. Efficiency: 98.3% Dimensions: 425 x 387 x 147 mm Weight: 12.5 kg Operating temperature range: -25°C - +60°C Protection class: IP66 Manufacturer's warranty: 5 years Scope of delivery 1x Growatt mod 3ktl3-xh-BP hybrid inverter

The Growatt mod 4ktl3-xh-bp hybrid inverter (mpn mod 4ktl3-xh-bp) is a 3-phase inverter that ensures simple and user-friendly operation of large Solarasystems thanks to its high output and compact size. The inverter is characterized by a high efficiency of 98.3 %, which makes it a powerful and flexible device when configuring a system. In addition to 2 independent mppt inputs and a maximum PV output of 8000w, the inverter also has an OLED touch display, which is a great advantage for simple and uncomplicated operation. Loads and batteries can also be connected. The APX battery system is compatible with this. Optionally, the mod-xh-BP series can be equipped with the SYN 50 xh 30 - backup boxto achieve off-grid operation. The mod-xh-BP series: 2 independent mppts Battery-ready, future-proof Type ii spd on dc and ac side Integrated afci function Support for export limitation OLED and touch button DC/AC ratio up to 2.0 Off-grid function possible with optional accessories Hybrid inverter In contrast to conventional inverters, hybrid inverters can not only feed the electricity generated by the Solarasystem into the power grid, but also store it in batteries. This means that solar power is also available when the sun is not shining. Another feature of hybrid inverters is their ability to optimize a household's electricity consumption by preferring to use the solar power directly in the household before it is fed into the grid. Active safety with afci function With an Arc Fault Circuit Interrupter is an arc fault protection device. It protects circuits in the event of arcing faults and acts as a circuit breaker against contact faults in low-voltage installations. I n addition to providing protection, it analyses current and voltage curves using digital signal processing and interrupts circuits in the event of fault signatures. The afci is also known colloquially as a fire protection switch, as overheating at poor contact points or flashovers between two conductors can be prevented by emitted signals. Two MPP trackers for optimum solar yields Maximum Power Point Tracker technology is used to generate the best possible yield from a Solarasystem. The mppt determines the optimum ratio between irradiance, module temperature and solar cell type over the course of the day. The two MPP trackers in the mod inverter allow the optimum operating point for the two PV strings to be optimized separately. The two trackers work independently of each other and so, for example, shading on one string would have no effect on the second. Operating modes - configurable according to system requirements Working mode: The mod-xh converts the dc power from PV strings into AC power and feeds this into the grid. As soon as the output power does not meet the requirements for grid-connected power generation, the normal operating mode is switched off. Fault mode: The inverter monitors and controls the status of the system in real time. If, for example, system or inverter errors occur, the display shows the error information and disconnects the inverter output from the grid. Switch-off mode: The inverter switches off automatically when solar radiation is weak or absent. AC&DC type ii spd AC and dc type ii spds (surge protective devices) protect grid inverters from overvoltages and are an important component for the safety and reliability of Solarasystems. AC spds protect the AC side and dc spds protect the DC side of the inverter. These protective devices discharge excess voltage pulses that can be caused by lightning strikes, switching operations in the power grid or other events. Numerous protective functions dc / AC surge arrester: type ii dc reverse polarity protection and disconnector Insulation resistance detection AC short-circuit protection Mains, residual current and string monitoring Stand-alone grid detection afci protection (arc fault detection) Growatt monitoring platform (can be used with optional accessories) The Growatt monitoring platform can be used with the optional Shine series accessories. This is available as a smartphone app (for iOS and Android) and as a web version. The Shine accessories must be purchased separately, use of the platform is free of charge. you can configure and monitor all your Growatt products via Shine, and it is also possible to display self-consumption and trends. The following Shine options are compatible with the mod 3-15KTL3-X/xh series: ShineWiFi-X Shine4G-X ShineLan-X ShineLink-X Technical data Input (DC) Max. PV line: 8000W Max. Input voltage: 1100V Start voltage: 160V Rated voltage: 600V mppt-Spannungsbereich: 140-1000V Max. Input current per mppt: 16A Max. Short-circuit current per mppt: 20A Input (dc battery) Compatible with ark xh battery system Operating voltage range: 600-950V Max. Operating current: 11A Max. Charging power: 6000W Max. Discharge power: 4400W Output (AC) AC rated power: 4000W AC rated voltage range: 220v/380v, 230v/400v (340-44V0) Frequency range: 50/60 Hz (45-55Hz/55-65Hz) Max. Output current: 6.7A General Max. Efficiency: 98.3% Dimensions: 425 x 387 x 147 mm Weight: 12.5 kg Operating temperature range: -25°C - +60°C Protection class: IP66 Manufacturer's warranty: 5 years Scope of delivery 1x Growatt mod 4ktl3-xh-bp hybrid inverter