Growatt SYN 50 XH 30 Back-Up Box Notersatzstrom
Product number:
8-29-017135
8-29-017135
Shipped in 1-3 days
€608.64*
€511.46**
Product number:
8-29-017135
VAT-exempt delivery possible*
VAT-exempt order for Germany according to § 12 para. 3 UstG and Austria (§ 28 Abs. 62 UStG 1994)
§ Section 12 (3) UstG only applies if you are a private individual and the product is installed in Germany. To benefit from the 0 percent rate, please confirm at the checkout that you are eligible for the zero tax rate according to § 12 para. 3 UstG. Subsequently, the tax rate will automatically be set to zero for eligible items.
Similar Products
VAT-exempt delivery possible*
More versions available
2-29-018185-001
Growatt apx 5kWh battery system with back-up box and bms p2 for mod-xh BP inverters
The modular concept of the Growatt apx battery system enables a wide range of applications and flexible expansion as required. Between 1 and 6 high-voltage batteries can be installed within a battery tower. The battery module is a high-voltage battery that features the latest LiFePO4 technology and boasts a nominal energy of 5kWh. The body also includes a battery management system of the latest generation, which protects the battery modules from adverse conditions, and a battery base that ensures a secure stand during ground installation. As an option, a back-up box can be added for emergency power generation. It is able to provide up to 10kWh from the solar storage system in the event of a power failure.The apx battery system contains:apx 5.0p-b1 high-voltage battery 5kWh LiFePO4 (1-6x depending on selection)apx 98034-p2 power module bmsapx battery base High-voltage batteryOptional: syn 50 xh 30 Back-Up Box emergency backup powerThe apx battery system demonstrates its flexible configuration options. These can be extended from 5kWh to 30kWh. The simple design makes installation and expansion very straightforward with the help of cables. A further advance of the new storage system is that, unlike other systems, a battery cabinet is no longer required. Only the corresponding battery base is required for a secure stand. The apx series supports the combination of mixed battery packs from new and old batches, as well as different capacities.apx 5.0p-b1 high-voltage batteryThe apx 5.0p-b1 battery module from Growatt is a high-voltage battery with proven lithium iron phosphate storage technology. The LiFePO4 batteries are characterized by a long service life and a high level of safety, even at high power. In addition, the modular energy optimization ensures that the system fully utilizes the energy of each battery. In order to achieve a very flexible system application, old and new battery batches as well as batteries with different capacities can be mixed and connected. Soft start is used to avoid overvoltage in the system.The apx high-voltage battery:Flexible capacity options up to 30kWhCobalt-free LiFePO4 storage technology90% depth of discharge (DoD)Active protection at bms levelIntegrated modular energy optimizationSupports the combination of new and old battery modules in one systemSoft start to avoid overvoltages in the systemModular and stackable designEasy installation10-year manufacturer's warrantyLong cycle lifeThe apx battery system relies on LiFePO4 chemistry without cobalt and offers a four-stage protection mechanism through a battery management system (bms), modular energy optimization, a fuse and aerosol. This ensures increased safety, reliability and a long service life. The modular energy optimization ensures that the system fully utilizes the energy of each individual battery. Regardless of whether the solar system is grid-connected or stand-alone, Growatt storage offers several advantages over typical lead-acid batteries and other lithium technologies.Soft start to protect the systemThe soft start mechanism is a protective function that is used with the Growatt battery to protect the system from overvoltage. When the battery is started or switched on, the power supply is gradually increased to protect the system from damage that could be caused by a sudden voltage spike. This ensures smooth and safe operation of the battery system.Technical data:Battery type: Lithium iron phosphate (LiFePo4)Nominal voltage: 385VNominal energy: 5kWhOperating voltage range: 330-450VWeight: 50kgDimensions: 690 x 185 x 295 mmProtection class: IP66Ambient temperature: -10°C - +50°CCooling: Natural convectionWarranty: 10 year manufacturer's warrantyBattery management systemThe new Growatt apx 98034-p2 battery management system (MPN 98034-p2) is a control unit of the latest generation that protects each apx battery module from adverse conditions and ensures safe and trouble-free continuous operation. It does not matter how many modules are in operation at the same time. What is important is that one bms is always used per tower. A tower consists of a minimum of 1 to a maximum of 6 Growatt apx 5.0p-b1 5kWh high-voltage battery modules, which can result in a storage capacity of 5-30 kWh.Monitoring parametersSOCSystem voltageSystem currentCell voltageCell temperaturePCBA temperatureTechnical data:Dimensions: 690 x 185 x 295 mmWeight: 15kgMax. Current: 30APeak current: 34a, 60sCommunication: RS485/CANBattery baseThe Growatt apx Battery Base is suitable for the floor installation of Growatt apx battery modules and the associated bms. It ensures that the battery tower stands securely. The Growatt apx system has a modular design, i.e. several batteries can be combined, with the Growatt Base serving as the foundation. Up to 10 storage modules and the associated bms can be stacked on one base.for floor mounting of Growatt apx batteries and associated bmsone base per battery towerDimensions: 690 x 185 x 50 mmsyn 50-xh-30 Back-UP BoxThe syn 50-xh-30 from Growatt is a back-up box that acts as an emergency backup power supply for the home. It is able to provide up to 10kW from the solar storage system in the event of a power failure. The switchover time is 0.5 seconds. The Back-Up Box is characterized by a user-friendly design, which enables uncomplicated installation and operation.The syn Back-Up Box:Backup power supply for the entire house, up to 10 kW100% 3-phase asymmetrical outputIntegrated switchEasy to installCombination options with the entire Growatt MOD-xh BP seriesTechnical data:Max. Overcurrent protection AC input: 63 AMax. Continuous input current: 50 AAC output voltage: 230 v/400 VAC output voltage range: 180-280 VAC frequency: 50/60 HzAC frequency range: 45-65 HzAC rated power: 18 kWMax. continuous input current at 230v: 26.1 APeak AC power in backup mode: 19.8k WAC peak current in backup mode: 28.7 ACommunication: RS485Operating temperature range: -40°C - +60°CProtection class: IP65Weight: 10.8 kgDimensions: 365 x 450 x 123 mmCompatible invertersThe following hybrid inverters are intended for the storage system:MOD 3KTL3-xh BPMOD 4KTL3-xh BP MOD 5KTL3-xh BP MOD 6KTL3-xh BP MOD 7KTL3-xh BP MOD 8KTL3-xh BP MOD 9KTL3-xh BP MOD 10KTL3-xh BP
Variants from €3,035.21*
The modular concept of the Growatt apx battery system enables a wide range of applications and flexible expansion as required. Between 1 and 6 high-vo...
Shipped in 3-6 Werktage
Shipped in 3-6 Werktage
VAT-exempt delivery possible*
More versions available
2-29-018185-003
Growatt apx 10kWh battery system with back-up box and bms p2 for mod-xh BP inverters
The modular concept of the Growatt apx battery system enables a wide range of applications and flexible expansion as required. Between 1 and 6 high-voltage batteries can be installed within a battery tower. The battery module is a high-voltage battery that features the latest LiFePO4 technology and boasts a nominal energy of 5kWh. The body also includes a battery management system of the latest generation, which protects the battery modules from adverse conditions, and a battery base that ensures a secure stand during ground installation. As an option, a back-up box can be added for emergency power generation. It is able to provide up to 10kWh from the solar storage system in the event of a power failure.The apx battery system contains:apx 5.0p-b1 high-voltage battery 5kWh LiFePO4 (1-6x depending on selection)apx 98034-p2 power module bmsapx battery base High-voltage batteryOptional: syn 50 xh 30 Back-Up Box emergency backup powerThe apx battery system demonstrates its flexible configuration options. These can be extended from 5kWh to 30kWh. The simple design makes installation and expansion very straightforward with the help of cables. A further advance of the new storage system is that, unlike other systems, a battery cabinet is no longer required. Only the corresponding battery base is required for a secure stand. The apx series supports the combination of mixed battery packs from new and old batches, as well as different capacities.apx 5.0p-b1 high-voltage batteryThe apx 5.0p-b1 battery module from Growatt is a high-voltage battery with proven lithium iron phosphate storage technology. The LiFePO4 batteries are characterized by a long service life and a high level of safety, even at high power. In addition, the modular energy optimization ensures that the system fully utilizes the energy of each battery. In order to achieve a very flexible system application, old and new battery batches as well as batteries with different capacities can be mixed and connected. Soft start is used to avoid overvoltage in the system.The apx high-voltage battery:Flexible capacity options up to 30kWhCobalt-free LiFePO4 storage technology90% depth of discharge (DoD)Active protection at bms levelIntegrated modular energy optimizationSupports the combination of new and old battery modules in one systemSoft start to avoid overvoltages in the systemModular and stackable designEasy installation10-year manufacturer's warrantyLong cycle lifeThe apx battery system relies on LiFePO4 chemistry without cobalt and offers a four-stage protection mechanism through a battery management system (bms), modular energy optimization, a fuse and aerosol. This ensures increased safety, reliability and a long service life. The modular energy optimization ensures that the system fully utilizes the energy of each individual battery. Regardless of whether the solar system is grid-connected or stand-alone, Growatt storage offers several advantages over typical lead-acid batteries and other lithium technologies.Soft start to protect the systemThe soft start mechanism is a protective function that is used with the Growatt battery to protect the system from overvoltage. When the battery is started or switched on, the power supply is gradually increased to protect the system from damage that could be caused by a sudden voltage spike. This ensures smooth and safe operation of the battery system.Technical data:Battery type: Lithium iron phosphate (LiFePo4)Nominal voltage: 385VNominal energy: 5kWhOperating voltage range: 330-450VWeight: 50kgDimensions: 690 x 185 x 295 mmProtection class: IP66Ambient temperature: -10°C - +50°CCooling: Natural convectionWarranty: 10 year manufacturer's warrantyBattery management systemThe new Growatt apx 98034-p2 battery management system (MPN 98034-p2) is a control unit of the latest generation that protects each apx battery module from adverse conditions and ensures safe and trouble-free continuous operation. It does not matter how many modules are in operation at the same time. What is important is that one bms is always used per tower. A tower consists of a minimum of 1 to a maximum of 6 Growatt apx 5.0p-b1 5kWh high-voltage battery modules, which can result in a storage capacity of 5-30 kWh.Monitoring parametersSOCSystem voltageSystem currentCell voltageCell temperaturePCBA temperatureTechnical data:Dimensions: 690 x 185 x 295 mmWeight: 15kgMax. Current: 30APeak current: 34a, 60sCommunication: RS485/CANBattery baseThe Growatt apx Battery Base is suitable for the floor installation of Growatt apx battery modules and the associated bms. It ensures that the battery tower stands securely. The Growatt apx system has a modular design, i.e. several batteries can be combined, with the Growatt Base serving as the foundation. Up to 10 storage modules and the associated bms can be stacked on one base.for floor mounting of Growatt apx batteries and associated bmsone base per battery towerDimensions: 690 x 185 x 50 mmsyn 50-xh-30 Back-UP BoxThe syn 50-xh-30 from Growatt is a back-up box that acts as an emergency backup power supply for the home. It is able to provide up to 10kW from the solar storage system in the event of a power failure. The switchover time is 0.5 seconds. The Back-Up Box is characterized by a user-friendly design, which enables uncomplicated installation and operation.The syn Back-Up Box:Backup power supply for the entire house, up to 10 kW100% 3-phase asymmetrical outputIntegrated switchEasy to installCombination options with the entire Growatt MOD-xh BP seriesTechnical data:Max. Overcurrent protection AC input: 63 AMax. Continuous input current: 50 AAC output voltage: 230 v/400 VAC output voltage range: 180-280 VAC frequency: 50/60 HzAC frequency range: 45-65 HzAC rated power: 18 kWMax. continuous input current at 230v: 26.1 APeak AC power in backup mode: 19.8k WAC peak current in backup mode: 28.7 ACommunication: RS485Operating temperature range: -40°C - +60°CProtection class: IP65Weight: 10.8 kgDimensions: 365 x 450 x 123 mmCompatible invertersThe following hybrid inverters are intended for the storage system:MOD 3KTL3-xh BPMOD 4KTL3-xh BP MOD 5KTL3-xh BP MOD 6KTL3-xh BP MOD 7KTL3-xh BP MOD 8KTL3-xh BP MOD 9KTL3-xh BP MOD 10KTL3-xh BP
Variants from €3,035.21*
The modular concept of the Growatt apx battery system enables a wide range of applications and flexible expansion as required. Between 1 and 6 high-vo...
Shipped in 3-6 Werktage
Shipped in 3-6 Werktage
VAT-exempt delivery possible*
8-29-018300
Growatt syn 100-xh-30 back-up box Emergency backup power
The syn 100-xh-30 from Growatt is a reliable back-up solution for your home to ensure a continuous power supply in the event of a power outage. This innovative box can supply an impressive 40kW from the solar storage system and offers a very fast switchover time of just 0.5 seconds. In addition, its user-friendly design ensures effortless installation and use.The syn Back-Up BoxBackup power supply for the entire house, up to 40 kW100% 3-phase asymmetrical outputIntegrated switchEasy to installCombination options with the entire Growatt mid-xh seriesCompatibilityTo achieve off-grid operation of a Growatt mid-xh inverter, the syn 100-xh-30 can optionally be combined. The following hybrid inverters are intended for this:MID 11KTL3-XHMID 12KTL3-XHMID 13KTL3-XHMID 15KTL3-XHMID 17KTL3-XHMID 20KTL3-XHMID 25KTL3-XHMID 30KTL3-XHThe mid-xh series:2 independent MPPTsBattery-ready, future-proofType ii spd on dc and AC sideIntegrated AFCI functionOLED, LED and touch buttonDC/AC ratio up to 2.024h self-consumption monitoring10-year manufacturer's warrantyThe apx battery systemAll the inverters mentioned above are compatible with the apx battery system. Thanks to the modular concept, the apx system can be used flexibly and expanded as required. A battery tower can be equipped with at least one to a maximum of six apx 5.0p-b1 battery modules can be installed. One power module per tower is required for operation. A distinction is made between the apx 98020-P1 or the apx 98034-P2 can be selected. The bms must be purchased separately and an additional base is required for floor mounting.Flexible expansionThe apx battery system from Growatt demonstrates its flexible configuration options. These can be expanded from 5kWh to 30kWh. The simple and modular design makes installation and expansion very straightforward with the help of cables. A further advance of the new storage system is that, unlike other systems, a battery cabinet is no longer required. Only a battery base is required for a secure stand. The apx series supports the combination of mixed battery packs from new and old batches, as well as different capacities.Technical data of the Back-Up BoxMax. Overcurrent protection AC input: 125 AMax. Continuous input current: 90 AAC output voltage: 230 v/400 v (340-440v)AC frequency: 50/60 HzAC frequency range: 45-65 HzAC rated power: 40 kWMax. continuous input current at 230v: 58 APeak AC power in backup mode: 44 kWAC peak current in backup mode: 63 ACommunication: RS485Operating temperature range: -40°C - +60°CProtection class: IP65Weight: 12 kgDimensions: 365 x 450 x 123 mmScope of delivery:1x Growatt syn 100-xh-30 Back-Up Box
The syn 100-xh-30 from Growatt is a reliable back-up solution for your home to ensure a continuous power supply in the event of a power outage. This i...
Shipped in 2-5 days
Shipped in 2-5 days
Addon Products
VAT-exempt delivery possible*
1-29-017075
Growatt mod 4ktl3-xh bp 4kW hybrid inverter 3-phase
The Growatt mod 4ktl3-xh-bp hybrid inverter (mpn mod 4ktl3-xh-bp) is a 3-phase inverter that ensures simple and user-friendly operation of large Solarasystems thanks to its high output and compact size. The inverter is characterized by a high efficiency of 98.3 %, which makes it a powerful and flexible device when configuring a system. In addition to 2 independent mppt inputs and a maximum PV output of 8000w, the inverter also has an OLED touch display, which is a great advantage for simple and uncomplicated operation. Loads and batteries can also be connected. The APX battery system is compatible with this. Optionally, the mod-xh-BP series can be equipped with the SYN 50 xh 30 - backup boxto achieve off-grid operation. The mod-xh-BP series: 2 independent mppts Battery-ready, future-proof Type ii spd on dc and ac side Integrated afci function Support for export limitation OLED and touch button DC/AC ratio up to 2.0 Off-grid function possible with optional accessories Hybrid inverter In contrast to conventional inverters, hybrid inverters can not only feed the electricity generated by the Solarasystem into the power grid, but also store it in batteries. This means that solar power is also available when the sun is not shining. Another feature of hybrid inverters is their ability to optimize a household's electricity consumption by preferring to use the solar power directly in the household before it is fed into the grid. Active safety with afci function With an Arc Fault Circuit Interrupter is an arc fault protection device. It protects circuits in the event of arcing faults and acts as a circuit breaker against contact faults in low-voltage installations. I n addition to providing protection, it analyses current and voltage curves using digital signal processing and interrupts circuits in the event of fault signatures. The afci is also known colloquially as a fire protection switch, as overheating at poor contact points or flashovers between two conductors can be prevented by emitted signals. Two MPP trackers for optimum solar yields Maximum Power Point Tracker technology is used to generate the best possible yield from a Solarasystem. The mppt determines the optimum ratio between irradiance, module temperature and solar cell type over the course of the day. The two MPP trackers in the mod inverter allow the optimum operating point for the two PV strings to be optimized separately. The two trackers work independently of each other and so, for example, shading on one string would have no effect on the second. Operating modes - configurable according to system requirements Working mode: The mod-xh converts the dc power from PV strings into AC power and feeds this into the grid. As soon as the output power does not meet the requirements for grid-connected power generation, the normal operating mode is switched off. Fault mode: The inverter monitors and controls the status of the system in real time. If, for example, system or inverter errors occur, the display shows the error information and disconnects the inverter output from the grid. Switch-off mode: The inverter switches off automatically when solar radiation is weak or absent. AC&DC type ii spd AC and dc type ii spds (surge protective devices) protect grid inverters from overvoltages and are an important component for the safety and reliability of Solarasystems. AC spds protect the AC side and dc spds protect the DC side of the inverter. These protective devices discharge excess voltage pulses that can be caused by lightning strikes, switching operations in the power grid or other events. Numerous protective functions dc / AC surge arrester: type ii dc reverse polarity protection and disconnector Insulation resistance detection AC short-circuit protection Mains, residual current and string monitoring Stand-alone grid detection afci protection (arc fault detection) Growatt monitoring platform (can be used with optional accessories) The Growatt monitoring platform can be used with the optional Shine series accessories. This is available as a smartphone app (for iOS and Android) and as a web version. The Shine accessories must be purchased separately, use of the platform is free of charge. you can configure and monitor all your Growatt products via Shine, and it is also possible to display self-consumption and trends. The following Shine options are compatible with the mod 3-15KTL3-X/xh series: ShineWiFi-X Shine4G-X ShineLan-X ShineLink-X Technical data Input (DC) Max. PV line: 8000W Max. Input voltage: 1100V Start voltage: 160V Rated voltage: 600V mppt-Spannungsbereich: 140-1000V Max. Input current per mppt: 16A Max. Short-circuit current per mppt: 20A Input (dc battery) Compatible with ark xh battery system Operating voltage range: 600-950V Max. Operating current: 11A Max. Charging power: 6000W Max. Discharge power: 4400W Output (AC) AC rated power: 4000W AC rated voltage range: 220v/380v, 230v/400v (340-44V0) Frequency range: 50/60 Hz (45-55Hz/55-65Hz) Max. Output current: 6.7A General Max. Efficiency: 98.3% Dimensions: 425 x 387 x 147 mm Weight: 12.5 kg Operating temperature range: -25°C - +60°C Protection class: IP66 Manufacturer's warranty: 5 years Scope of delivery 1x Growatt mod 4ktl3-xh-bp hybrid inverter
The Growatt mod 4ktl3-xh-bp hybrid inverter (mpn mod 4ktl3-xh-bp) is a 3-phase inverter that ensures simple and user-friendly operation of large Solar...
Shipped in 2-5 days
Shipped in 2-5 days
VAT-exempt delivery possible*
1-29-017080
Growatt mod 5ktl3-xh bp 5kW hybrid inverter 3-phase
The Growatt mod 5ktl3-xh-bp hybrid inverter (mpn mod 5ktl3-xh-bp) is a 3-phase inverter that ensures simple and user-friendly operation of large Solarasystems thanks to its high output and compact size. The inverter is characterized by a high efficiency of 98.3 %, which makes it a powerful and flexible device when configuring a system. In addition to 2 independent mppt inputs and a maximum PV power of 10000w, the inverter also has an OLED touch display, which is a great advantage for simple and uncomplicated operation. Loads and batteries can also be connected. The apx battery system is compatible with this. Optionally, the mod-xh-BP series can be equipped with the SYN 50 xh 30 - backup boxto achieve off-grid operation. The mod-xh-BP series: 2 independent mppts Battery-ready, future-proof Type ii spd on dc and ac side Integrated afci function Support for export limitation OLED and touch button DC/AC ratio up to 2.0 Off-grid function possible with optional accessories Hybrid inverter In contrast to conventional inverters, hybrid inverters can not only feed the electricity generated by the Solarasystem into the power grid, but also store it in batteries. This means that solar power is also available when the sun is not shining. Another feature of hybrid inverters is their ability to optimize a household's electricity consumption by preferring to use the solar power directly in the household before it is fed into the grid. Active safety with afci function With an Arc Fault Circuit Interrupter is an arc fault protection device. It protects circuits in the event of arcing faults and acts as a circuit breaker against contact faults in low-voltage installations. I n addition to providing protection, it analyses current and voltage curves using digital signal processing and interrupts circuits in the event of fault signatures. The afci is also known colloquially as a fire protection switch, as overheating at poor contact points or flashovers between two conductors can be prevented by emitted signals. Two MPP trackers for optimum solar yields Maximum Power Point Tracker technology is used to generate the best possible yield from a Solarasystem. The mppt determines the optimum ratio between irradiance, module temperature and solar cell type over the course of the day. The two MPP trackers in the mod inverter allow the optimum operating point for the two PV strings to be optimized separately. The two trackers work independently of each other and so, for example, shading on one string would have no effect on the second. Operating modes - configurable according to system requirements Working mode: The mod-xh converts the dc power from PV strings into AC power and feeds this into the grid. As soon as the output power does not meet the requirements for grid-connected power generation, the normal operating mode is switched off. Fault mode: The inverter monitors and controls the status of the system in real time. If, for example, system or inverter errors occur, the display shows the error information and disconnects the inverter output from the grid. Switch-off mode: The inverter switches off automatically when solar radiation is weak or absent. AC&DC type ii spd AC and dc type ii spds (surge protective devices) protect grid inverters from overvoltages and are an important component for the safety and reliability of Solarasystems. AC spds protect the AC side and dc spds protect the DC side of the inverter. These protective devices discharge excess voltage pulses that can be caused by lightning strikes, switching operations in the power grid or other events. Numerous protective functions dc / AC surge arrester: type ii dc reverse polarity protection and disconnector Insulation resistance detection AC short-circuit protection Mains, residual current and string monitoring Stand-alone grid detection afci protection (arc fault detection) Growatt monitoring platform (can be used with optional accessories) The Growatt monitoring platform can be used with the optional Shine series accessories. This is available as a smartphone app (for iOS and Android) and as a web version. The Shine accessories must be purchased separately, use of the platform is free of charge. you can configure and monitor all your Growatt products via Shine, and it is also possible to display self-consumption and trends. The following Shine options are compatible with the mod 3-15KTL3-X/xh series: ShineWiFi-X Shine4G-X ShineLan-X ShineLink-X Technical data Input (DC) Max. PV line: 10000W Max. Input voltage: 1100V Start voltage: 160V Rated voltage: 600V mppt-Spannungsbereich: 140-1000V Max. Input current per mppt: 16A Max. Short-circuit current per mppt: 20A Input (dc battery) Compatible with ark xh battery system Operating voltage range: 600-950V Max. Operating current: 11A Max. Charging power: 6000W Max. Discharge power: 5500W Output (AC) AC rated power: 5000W AC rated voltage range: 220v/380v, 230v/400v (340-44V0) Frequency range: 50/60 Hz (45-55Hz/55-65Hz) Max. Output current: 8.3A General Max. Efficiency: 98.3% Dimensions: 425 x 387 x 147 mm Weight: 12.5 kg Operating temperature range: -25°C - +60°C Protection class: IP66 Manufacturer's warranty: 5 years Scope of delivery 1x Growatt mod 5ktl3-xh-bp hybrid inverter
The Growatt mod 5ktl3-xh-bp hybrid inverter (mpn mod 5ktl3-xh-bp) is a 3-phase inverter that ensures simple and user-friendly operation of large Solar...
Shipped in 2-5 days
Shipped in 2-5 days
VAT-exempt delivery possible*
1-29-017085
Growatt MOD 6KTL3-XH BP 6kW Hybrid-Wechselrichter 3-phasig
Der Growatt MOD 6KTL3-XH-BP Hybrid-Inverter (MPN MOD 6KTL3-XH-BP) ist ein 3-phasiger Wechselrichter, der mit seiner hohen Leistung und seiner Kompaktheit für einen einfachen und benutzerfreundlichen Betrieb großer Solaranlagen sorgt. Der Inverter zeichnet sich durch einen hohen Wirkungsgrad von 98,3 % aus, was ihn zu einem leistungsstarken und flexiblen Gerät bei der Konfiguration einer Anlage macht. Neben 2 unabhängigen MPPT-Eingängen und einer maximalen PV-Leistung von 12000W, verfügt der Wechselrichter auch über ein OLED-Touch-Display, was von großen Vorteil für eine einfache und unkomplizierte Bedienung ist. Zusätzlich lassen sich Lasten und Batterien anschließen. Hierzu kompatibel ist das APX Batteriesystem.
Optional kann die MOD-XH-BP-Serie mit der SYN 50 XH 30 - Backup-Box kombiniert werden, um einen Offgrid-Betrieb zu erreichen.
Die MOD-XH-BPSerie:
2 unabhängige MPPTs
Battery-ready, zukunftssicher
Typ II SPD auf DC- und AC-Seite
Integrierte AFCI-Funktion
Unterstützung der Exportbegrenzung
OLED und Touch Taste
DC/AC-Verhältnis bis zu 2,0
Offgrid-Funktion mit optionalem Zubehör möglich
Hybrid-Wechselrichter
Im Gegensatz zu herkömmlichen Wechselrichtern können Hybrid-Wechselrichter den erzeugten Strom aus der Solaranlage nicht nur in das Stromnetz einspeisen, sondern auch in Batterien speichern. Dadurch wird der Solarstrom auch dann verfügbar, wenn die Sonne nicht scheint. Ein weiteres Merkmal von Hybrid-Wechselrichtern ist ihre Fähigkeit, den Stromverbrauch eines Haushalts zu optimieren, indem sie den Solarstrom bevorzugt direkt im Haushalt nutzen, bevor er ins Netz eingespeist wird.
Aktive Sicherheit mit AFCI-Funktion
Bei einem Arc Fault Circuit Interrupter handelt es sich um eine Fehlerlichtbogen-Schutzeinrichtung. Sie schützt Stromkreise bei Störlichtbögen und agiert in der Niederspannungsinstallation als Schutzschalter gegen Kontaktfehler. Dieser analysiert, neben seinem Schutz, Strom- und Spannungsverläufe mittels digitaler Signalverarbeitung und unterbricht Stromkreise bei Störsignaturen. Umgangssprachlich wird der AFCI auch Brandschutzschalter genannt, da durch eigehende Signale Überhitzungen an schlechten Kontaktstellen oder bei Überschlägen zwischen zwei Leitern, Brände verhindert werden können.
Zwei MPP-Tracker für optimale Solar-Erträge
Mit der Maximum Power Point Tracker Technologie wird der bestmögliche Ertrag einer Solaranlage generiert. Der MPPT stellt dabei im Tagesverlauf das optimale Verhältnis zwischen Bestrahlungsstärke, Temperatur am Modul und Solarzellentyp fest. Durch die zwei MPP-Tracker im MOD-Inverter kann der optimale Arbeitspunkt für die zwei PV-Stränge getrennt voneinander optimiert werden. Die beiden Tracker arbeiten unabhängig voneinander und so hätte z.B. eine Verschattung bei einem Strang keinen Einfluss auf den zweiten.
Betriebs-Modi - Je nach System-Anforderungen konfigurierbar
Arbeitsmodus: Der MOD-XH wandelt die DC-Leistung von PV-Strings in AC-Leistung um und speist diese in das Stromnetz ein. Sobald die Ausgangsleistung nicht den Anforderungen für die netzgekoppelte Stromerzeugung entspricht, wird der normale Betriebsmodus abgeschaltet.
Fehlermodus: Der Wechselrichter überwacht und regelt den Zustand des Systems in Echtzeit. Wenn z. B. System- oder Wechselrichterfehler auftreten, zeigt das Display die Fehlerinformationen an und trennt den Wechselrichterausgang vom Netz.
Abschaltmodus: Bei schwacher oder fehlender Sonneneinstrahlung schaltet der Wechselrichter automatisch ab.
AC&DC Typ II SPD
AC- und DC-Typ II SPDs (Surge Protective Devices) schützen Netz-Inverter vor Überspannungen und sind eine wichtige Komponente für die Sicherheit und Zuverlässigkeit von Solaranlagen. AC-SPDs schützen die Wechselstromseite und DC-SPDs die Gleichstromseite des Inverters. Diese Schutzeinrichtungen leiten überschüssige Spannungsimpulse ab, die durch Blitzschläge, Schaltvorgänge im Stromnetz oder andere Ereignisse verursacht werden können.
Zahlreiche Schutzfunktionen
DC- / AC-Überspannungsableiter: Typ II
DC-Verpolungsschutz und -Trennschalter
Isolationswiderstandserkennung
AC-Kurzschlussschutz
Netz-, Fehlerstrom- und String-Überwachung
Inselnetzerkennung
AFCI-Schutz (Fehlerlichtbogenerkennung)
Growatt Überwachungsplattform (nutzbar mit optionalem Zubehör)
Mit dem optionalen Zubehör der Shine-Serie kann die Growatt Monitoring-Plattform genutzt werden. Diese ist als Smartphone-App (für iOS und Android), als auch in einer Webversion verfügbar. Das Shine-Zubehör muss separat erworben werden, die Nutzung der Plattform ist kostenfrei. Über Shine kann können Sie all Ihre Growatt-Produkte konfigurieren und überwacht werden, die Anzeige des Eigenverbrauchs und Trends ist ebenfalls möglich.
Zur MOD 3-15KTL3-X/XH-Serie sind folgende Shine-Optionen kompatibel:
ShineWiFi-X
Shine4G-X
ShineLan-X
ShineLink-X
Technische Daten
Eingang (DC)
Max. PV-Leitung: 12000W
Max. Eingangsspannung: 1100V
Start-Spannung: 160V
Nennspannung: 600V
MPPT-Spannungsbereich: 140-1000V
Max. Eingangsstrom pro MPPT: 16A
Max. Kurzschlussstrom pro MPPT: 20A
Eingang (DC-Batterie)
Kompatibel mit ARK XH Batteriesystem
Betriebsspannungsbereich: 600-950V
Max. Betriebsstrom: 11A
Max. Ladeleistung: 6000W
Max. Entladeleistung: 6600W
Ausgang (AC)
AC-Nennleistung: 6000W
AC-Nennspannungsbereich: 220V/380V, 230V/400V (340-44V0)
Frequenzbereich: 50/60 Hz (45-55Hz/55-65Hz)
Max. Ausgangsstrom: 10A
Allgemein
Max. Wirkungsgrad: 98,3%
Abmessungen: 425 x 387 x 147 mm
Gewicht: 12,5 kg
Betriebstemperaturbereich: -25°C - +60°C
Schutzklasse: IP66
Herstellergarantie: 5 Jahre
Lieferumfang
1x Growatt MOD 6KTL3-XH-BP Hybrid-Wechselrichter
Der Growatt MOD 6KTL3-XH-BP Hybrid-Inverter (MPN MOD 6KTL3-XH-BP) ist ein 3-phasiger Wechselrichter, der mit seiner hohen Leistung und seiner Kompakth...
Shipped in 2-5 days
Shipped in 2-5 days
VAT-exempt delivery possible*
1-29-017090
Growatt mod 7ktl3-xh bp 7kW hybrid inverter 3-phase
The Growatt mod 7ktl3-xh-bp hybrid inverter (mpn mod 7ktl3-xh-bp) is a 3-phase inverter that ensures simple and user-friendly operation of large Solarasystems thanks to its high output and compact size. The inverter is characterized by a high efficiency of 98.6%, which makes it a powerful and flexible device when configuring a system. In addition to 2 independent mppt inputs and a maximum PV power of 14000w, the inverter also has an OLED touch display, which is a great advantage for simple and uncomplicated operation. Loads and batteries can also be connected. The apx battery system is compatible with this. Optionally, the mod-xh-BP series can be equipped with the SYN 50 xh 30 - backup boxto achieve off-grid operation. The mod-xh-BP series: 2 independent mppts Battery-ready, future-proof Type ii spd on dc and ac side Integrated afci function Support for export limitation OLED and touch button DC/AC ratio up to 2.0 Off-grid function possible with optional accessories Hybrid inverter In contrast to conventional inverters, hybrid inverters can not only feed the electricity generated by the Solarasystem into the power grid, but also store it in batteries. This means that solar power is also available when the sun is not shining. Another feature of hybrid inverters is their ability to optimize a household's electricity consumption by preferring to use the solar power directly in the household before it is fed into the grid. Active safety with afci function With an Arc Fault Circuit Interrupter is an arc fault protection device. It protects circuits in the event of arcing faults and acts as a circuit breaker against contact faults in low-voltage installations. I n addition to providing protection, it analyses current and voltage curves using digital signal processing and interrupts circuits in the event of fault signatures. The afci is also known colloquially as a fire protection switch, as overheating at poor contact points or flashovers between two conductors can be prevented by emitted signals. Two MPP trackers for optimum solar yields Maximum Power Point Tracker technology is used to generate the best possible yield from a Solarasystem. The mppt determines the optimum ratio between irradiance, module temperature and solar cell type over the course of the day. The two MPP trackers in the mod inverter allow the optimum operating point for the two PV strings to be optimized separately. The two trackers work independently of each other and so, for example, shading on one string would have no effect on the second. Operating modes - configurable according to system requirements Working mode: The mod-xh converts the dc power from PV strings into AC power and feeds this into the grid. As soon as the output power does not meet the requirements for grid-connected power generation, the normal operating mode is switched off. Fault mode: The inverter monitors and controls the status of the system in real time. If, for example, system or inverter errors occur, the display shows the error information and disconnects the inverter output from the grid. Switch-off mode: The inverter switches off automatically when solar radiation is weak or absent. AC&DC type ii spd AC and dc type ii spds (surge protective devices) protect grid inverters from overvoltages and are an important component for the safety and reliability of Solarasystems. AC spds protect the AC side and dc spds protect the DC side of the inverter. These protective devices discharge excess voltage pulses that can be caused by lightning strikes, switching operations in the power grid or other events. Numerous protective functions dc / AC surge arrester: type ii dc reverse polarity protection and disconnector Insulation resistance detection AC short-circuit protection Mains, residual current and string monitoring Stand-alone grid detection afci protection (arc fault detection) Growatt monitoring platform (can be used with optional accessories) The Growatt monitoring platform can be used with the optional Shine series accessories. This is available as a smartphone app (for iOS and Android) and as a web version. The Shine accessories must be purchased separately, use of the platform is free of charge. you can configure and monitor all your Growatt products via Shine, and it is also possible to display self-consumption and trends. The following Shine options are compatible with the mod 3-15KTL3-X/xh series: ShineWiFi-X Shine4G-X ShineLan-X ShineLink-X Technical data Input (DC) Max. PV line: 14000W Max. Input voltage: 1100V Start voltage: 160V Rated voltage: 600V mppt-Spannungsbereich: 140-1000V Max. Input current per mppt: 16A Max. Short-circuit current per mppt: 20A Input (dc battery) Compatible with ark xh battery system Operating voltage range: 600-950V Max. Operating current: 18.5A Max. Charging power: 10000W Max. Discharge power: 7700W Output (AC) AC rated power: 7000W AC rated voltage range: 220v/380v, 230v/400v (340-44V0) Frequency range: 50/60 Hz (45-55Hz/55-65Hz) Max. Output current: 11.7A General Max. Efficiency: 98.6% Dimensions: 425 x 387 x 178 mm Weight: 14 kg Operating temperature range: -25°C - +60°C Protection class: IP66 Manufacturer's warranty: 5 years Scope of delivery 1x Growatt mod 7ktl3-xh-bp hybrid inverter
The Growatt mod 7ktl3-xh-bp hybrid inverter (mpn mod 7ktl3-xh-bp) is a 3-phase inverter that ensures simple and user-friendly operation of large Solar...
Shipped in 2-5 days
Shipped in 2-5 days
VAT-exempt delivery possible*
1-29-017100
Growatt mod 9ktl3-xh bp 9kW hybrid inverter 3-phase
The Growatt mod 9ktl3-xh-bp hybrid inverter (mpn mod 9ktl3-xh-bp) is a 3-phase inverter that ensures simple and user-friendly operation of large Solarasystems thanks to its high output and compact size. The inverter is characterized by a high efficiency of 98.6%, which makes it a powerful and flexible device when configuring a system. In addition to 2 independent mppt inputs and a maximum PV power of 18000w, the inverter also has an OLED touch display, which is a great advantage for simple and uncomplicated operation. Loads and batteries can also be connected. The apx battery system is compatible with this. Optionally, the mod-xh-BP series can be equipped with the SYN 50 xh 30 - backup boxto achieve off-grid operation. The mod-xh-BP series: 2 independent mppts Battery-ready, future-proof Type ii spd on dc and ac side Integrated afci function Support for export limitation OLED and touch button DC/AC ratio up to 2.0 Off-grid function possible with optional accessories Hybrid inverter In contrast to conventional inverters, hybrid inverters can not only feed the electricity generated by the Solarasystem into the power grid, but also store it in batteries. This means that solar power is also available when the sun is not shining. Another feature of hybrid inverters is their ability to optimize a household's electricity consumption by preferring to use the solar power directly in the household before it is fed into the grid. Active safety with afci function With an Arc Fault Circuit Interrupter is an arc fault protection device. It protects circuits in the event of arcing faults and acts as a circuit breaker against contact faults in low-voltage installations. I n addition to providing protection, it analyses current and voltage curves using digital signal processing and interrupts circuits in the event of fault signatures. The afci is also known colloquially as a fire protection switch, as overheating at poor contact points or flashovers between two conductors can be prevented by emitted signals. Two MPP trackers for optimum solar yields Maximum Power Point Tracker technology is used to generate the best possible yield from a Solarasystem. The mppt determines the optimum ratio between irradiance, module temperature and solar cell type over the course of the day. The two MPP trackers in the mod inverter allow the optimum operating point for the two PV strings to be optimized separately. The two trackers work independently of each other and so, for example, shading on one string would have no effect on the second. Operating modes - configurable according to system requirements Working mode: The mod-xh converts the dc power from PV strings into AC power and feeds this into the grid. As soon as the output power does not meet the requirements for grid-connected power generation, the normal operating mode is switched off. Fault mode: The inverter monitors and controls the status of the system in real time. If, for example, system or inverter errors occur, the display shows the error information and disconnects the inverter output from the grid. Switch-off mode: The inverter switches off automatically when solar radiation is weak or absent. AC&DC type ii spd AC and dc type ii spds (surge protective devices) protect grid inverters from overvoltages and are an important component for the safety and reliability of Solarasystems. AC spds protect the AC side and dc spds protect the DC side of the inverter. These protective devices discharge excess voltage pulses that can be caused by lightning strikes, switching operations in the power grid or other events. Numerous protective functions dc / AC surge arrester: type ii dc reverse polarity protection and disconnector Insulation resistance detection AC short-circuit protection Mains, residual current and string monitoring Stand-alone grid detection afci protection (arc fault detection) Growatt monitoring platform (can be used with optional accessories) The Growatt monitoring platform can be used with the optional Shine series accessories. This is available as a smartphone app (for iOS and Android) and as a web version. The Shine accessories must be purchased separately, use of the platform is free of charge. you can configure and monitor all your Growatt products via Shine, and it is also possible to display self-consumption and trends. The following Shine options are compatible with the mod 3-15KTL3-X/xh series: ShineWiFi-X Shine4G-X ShineLan-X ShineLink-X Technical data Input (DC) Max. PV line: 18000W Max. Input voltage: 1100V Start voltage: 160V Rated voltage: 600V mppt-Spannungsbereich: 140-1000V Max. Input current per mppt: 16A Max. Short-circuit current per mppt: 20A Input (dc battery) Compatible with ark xh battery system Operating voltage range: 600-950V Max. Operating current: 18.5A Max. Charging power: 10000W Max. Discharge power: 9900W Output (AC) AC rated power: 9000W AC rated voltage range: 220v/380v, 230v/400v (340-44V0) Frequency range: 50/60 Hz (45-55Hz/55-65Hz) Max. Output current: 15A General Max. Efficiency: 98.6% Dimensions: 425 x 387 x 178 mm Weight: 14 kg Operating temperature range: -25°C - +60°C Protection class: IP66 Manufacturer's warranty: 5 years Scope of delivery 1x Growatt mod 9ktl3-xh-bp hybrid inverter
The Growatt mod 9ktl3-xh-bp hybrid inverter (mpn mod 9ktl3-xh-bp) is a 3-phase inverter that ensures simple and user-friendly operation of large Solar...
Shipped in 2-5 days
Shipped in 2-5 days
Die SYN 50-XH-30 von Growatt ist eine Back-Up Box, die für das Haus als Notersatzstromversorgung agiert. Sie ist in der Lage, im Falle eines Stromausfalls, bis zu 10kW aus dem Solarspeicher zur Verfügung zu stellen. Hierbei beträgt die Umschaltzeit 0,5 Sekunden. Die Back-Up Box zeichnet sich durch ein anwenderfreundliches Design aus, was eine unkomplizierte Installation und Bedienung ermöglicht.
Die SYN Back-Up Box
- Ersatzstromversorgung für das gesamte Haus, bis zu 10 kW
- 100% 3-phasiger Asymmetrieausgang
- Integrierter Schalter
- Einfach zu installieren
- Kombinationsmöglichkeiten mit der gesamten Growatt MOD-XH BP-Serie
Kompatibilität
Um einen Offgrid-Betrieb eines Growatt MOD-XH BP Wechselrichters zu erreichen, kann optional die SYN 50-XH-30 kombiniert werden. Folgende Hybrid-Wechselrichter sind dafür vorgesehen:
- MOD 3KTL3-XH BP
- MOD 4KTL3-XH BP
- MOD 5KTL3-XH BP
- MOD 6KTL3-XH BP
- MOD 7KTL3-XH BP
- MOD 8KTL3-XH BP
- MOD 9KTL3-XH BP
- MOD 10KTL3-XH BP
Die MOD-XH-BP Serie
- 2 unabhängige MPPTs
- Battery-ready, zukunftssicher
- Typ II SPD auf DC- und AC-Seite
- Integrierte AFCI-Funktion
- Unterstützung der Exportbegrenzung
- OLED und Touch Taste
- DC/AC-Verhältnis bis zu 2,0
- Offgrid-Funktion mit optionalem Zubehör möglich
Hybrid-Wechselrichter
Im Gegensatz zu herkömmlichen Wechselrichtern können Hybrid-Wechselrichter den erzeugten Strom aus der Solaranlage nicht nur in das Stromnetz einspeisen, sondern auch in Batterien speichern. Dadurch wird der Solarstrom auch dann verfügbar, wenn die Sonne nicht scheint. Ein weiteres Merkmal von Hybrid-Wechselrichtern ist ihre Fähigkeit, den Stromverbrauch eines Haushalts zu optimieren, indem sie den Solarstrom bevorzugt direkt im Haushalt nutzen, bevor er ins Netz eingespeist wird.
Aktive Sicherheit mit AFCI-Funktion
Bei einem Arc Fault Circuit Interrupter handelt es sich um eine Fehlerlichtbogen-Schutzeinrichtung. Sie schützt Stromkreise bei Störlichtbögen und agiert in der Niederspannungsinstallation als Schutzschalter gegen Kontaktfehler. Dieser analysiert, neben seinem Schutz, Strom- und Spannungsverläufe mittels digitaler Signalverarbeitung und unterbricht Stromkreise bei Störsignaturen. Umgangssprachlich wird der AFCI auch Brandschutzschalter genannt, da durch eigehende Signale Überhitzungen an schlechten Kontaktstellen oder bei Überschlägen zwischen zwei Leitern, Brände verhindert werden können.
Das APX Batteriesystem
Alle oben genannten Wechselrichter sind mit dem APX-Batteriesystem kompatibel. Durch das modulare Konzept ist das APX-System flexibel einsetzbar und bei Bedarf erweiterbar. Ein Batterieturm kann mit mindestens einem bis maximal sechs APX 5.0P-B1 Batteriemodulen errichtet werden. Zum Betrieb wird pro Turm ein Leistungsmodul benötigt. Hierbei wird zwischen dem APX 98020-P1 oder dem APX 98034-P2 gewählt. Das BMS ist separat zu erwerben und für die Bodenmontage ist ein zusätzlicher Sockel erforderlich.
Flexibel Erweitern
Das APX Batteriesystem von Growatt zeigt hierbei seine flexiblen Konfigurationsmöglichkeiten. Diese sind von 5kWh bis zu 30kWh erweiterbar. Durch das einfache und modulare Design, gestaltet sich die Installation und Erweiterung sehr unkompliziert mit Hilfe von Kabeln. Ein weiterer Fortschritt des neuen Speichersystems besteht darin, dass im Gegensatz zu anderen Systemen, kein Batterieschrank mehr benötigt wird. Lediglich eine Batteriebasis wird für einen sicheren Stand benötigt. Die APX-Serie unterstützt das Kombinieren von gemischten Batterie-Packs aus neuen und alten Chargen, sowie unterschiedlichen Kapazitäten.
Technische Daten der Back-Up Box
- Max. Überstromschutz AC-Eingang: 63 A
- Max. Dauer-Einsatzstrom: 50 A
- AC-Ausgangsspannung: 230 V/400 V
- AC-Ausgangsspannungsbereich: 180-280 V
- AC-Frequenz: 50/60 Hz
- AC-Frequenzbereich: 45-65 Hz
- AC-Nennleistung: 18 kW
- Max. kontinuierlicher Eingangsstrom bei 230V: 26,1 A
- AC-Spitzenleistung im Backup-Betrieb: 19,8k W
- AC-Spitzenstrom im Backup-Betrieb: 28,7 A
- Kommunikation: RS485
- Betriebstemperaturbereich: -40°C - +60°C
- Schutzart: IP65
- Gewicht: 10,8 kg
- Abmessungen: 365 x 450 x 123 mm
Lieferumfang:
1x Growatt SYN 50-XH-30 Back-Up Box
Frequency range:
45 ~ 65 Hz
Manufacturer:
Growatt
Protection type:
IP65
Weight:
10,8 kg
8-29-017135
Loading products