Growatt ATS-S Transferschalter 1-Phasiger Power Switch

The HMT-1800-6T from Hoymiles is the perfect three-phase micro inverter for your balcony power plant. The compact lightweight (only 5.5kg) is suitable for solar power production with up to 6 solar panels with an output of 405W each. Just like all other micro inverters from Hoymiles, it is suitable for long operating hours and wide PV panel application, as its start-up is very low (only 22V) and the DC input range of the operating voltage (16-60V) is extremely wide. Information on required and optional accessories can be found at the end of the description. Note: The HMT Inverter may only be connected to the mains by an electrician. Properties Minimisation of the effects of e.g. shading, dust or ageing due to MPPT. High-quality energy generation with high MPPT accuracy Optional: system monitoring via the smartphone app S-Miles Enduser or the S-Miles Cloud (data transmission unit DTU-PRO-S is required) Optimum system reliability Peak efficiency of 96.5 12-year product guarantee High level of safety due to integrated protection functions Easy installation Long service life Complies with VDE-R-N 4105: 2018 & EN50549-1:2019 Optimum reliability Micro-inverter systems are inherently more reliable than conventional inverters. The decentralised design of a microinverter system ensures that the entire PV system will not fail in the event of a malfunction. Hoymiles microinverters are designed to operate at full power in ambient temperatures up to +65°C (150°F). The micro-inverter housing is designed for outdoor installation and complies with protection class IP67. Simple structure PV systems with Hoymiles microinverters are very easy to plan and install. Up to 6 solar modules can be connected per model. You do not need to install cumbersome conventional inverters. Each microinverter can be quickly mounted on the PV mounting rack or directly under the PV module. The PV module is connected to the microinverter directly on site, eliminating the risk of people being exposed to dangerously high DC voltage. Technical data Recommended module power: up to 405W (per module) Maximum input voltage: 60V MPPT voltage range: 16-60V Switch-on voltage: 22V Maximum input current: 6x11.5A Mains connection: Three-phase Rated output power (VA): 1800 Rated output current: 2.61 x 3 Rated output voltage / range: 230 V/AC/400 V/AC, 3W+N+PE Rated frequency / range (Hz): 50/45-55 or 60/55-65 Power factor (adjustable): >0.99 standard 0.8 leading ... 0.8 lagging Distortion factor: <3 Maximum units per 10 AWG strand2: 11 Maximum units per 12 AWG strand2: 7 CEC peak efficiency: 96.5 MPPT rated efficiency: 99.8 Power consumption at night (mW): <50 Ambient temperature range: -40~+65°C Dimensions (WxHxD): 330 x 250 x 35 mm Weight: 5.5 kg (including 0.6 m AC cable)Housing rating: IP67 Required HMT accessories You need a T-node with cable for each HMT microinverter.For each HMT microinverter system (one inverter or more), an end cap and an unlocking aid are required at least once.Optionally, a disconnection aid can also be ordered. Scope of delivery 1x Hoymiles HMT-1800-6T micro inverter r

The HMT-1800-6T from Hoymiles is the perfect three-phase micro inverter for your balcony power plant. The compact lightweight (only 5.5kg) is suitable for solar power production with up to 6 solar panels with an output of 405W each. Just like all other micro inverters from Hoymiles, it is suitable for long operating hours and wide PV panel application, as its start-up is very low (only 22V) and the DC input range of the operating voltage (16-60V) is extremely wide. Information on required and optional accessories can be found at the end of the description. Note: The HMT Inverter may only be connected to the mains by an electrician. Properties Minimisation of the effects of e.g. shading, dust or ageing due to MPPT. High-quality energy generation with high MPPT accuracy Optional: system monitoring via the smartphone app S-Miles Enduser or the S-Miles Cloud (data transmission unit DTU-PRO-S is required) Optimum system reliability Peak efficiency of 96.5 12-year product guarantee High level of safety due to integrated protection functions Easy installation Long service life Complies with VDE-R-N 4105: 2018 & EN50549-1:2019 Optimum reliability Micro-inverter systems are inherently more reliable than conventional inverters. The decentralised design of a microinverter system ensures that the entire PV system will not fail in the event of a malfunction. Hoymiles microinverters are designed to operate at full power in ambient temperatures up to +65°C (150°F). The micro-inverter housing is designed for outdoor installation and complies with protection class IP67. Simple structure PV systems with Hoymiles microinverters are very easy to plan and install. Up to 6 solar modules can be connected per model. You do not need to install cumbersome conventional inverters. Each microinverter can be quickly mounted on the PV mounting rack or directly under the PV module. The PV module is connected to the microinverter directly on site, eliminating the risk of people being exposed to dangerously high DC voltage. Technical data Recommended module power: up to 405W (per module) Maximum input voltage: 60V MPPT voltage range: 16-60V Switch-on voltage: 22V Maximum input current: 6x11.5A Mains connection: Three-phase Rated output power (VA): 1800 Rated output current: 2.61 x 3 Rated output voltage / range: 230 V/AC/400 V/AC, 3W+N+PE Rated frequency / range (Hz): 50/45-55 or 60/55-65 Power factor (adjustable): >0.99 standard 0.8 leading ... 0.8 lagging Distortion factor: <3 Maximum units per 10 AWG strand2: 11 Maximum units per 12 AWG strand2: 7 CEC peak efficiency: 96.5 MPPT rated efficiency: 99.8 Power consumption at night (mW): <50 Ambient temperature range: -40~+65°C Dimensions (WxHxD): 330 x 250 x 35 mm Weight: 5.5 kg (including 0.6 m AC cable)Housing rating: IP67 Required HMT accessories You need a T-node with cable for each HMT microinverter.For each HMT microinverter system (one inverter or more), an end cap and an unlocking aid are required at least once.Optionally, a disconnection aid can also be ordered. Scope of delivery 1x Hoymiles HMT-1800-6T micro inverter r

The Growatt sph4000tl bl-up hybrid inverter supports solar modules with an output of up to 7600w. It offers a scalable system configuration and a UPS function with a switchover time of 10ms. In addition, the single-phase inverter enables intelligent load management via a potential-free contact. With these functions, the inverter offers a flexible and reliable solution for solar projects. about the sph 4000ktl bl-up inverter Two MPP trackers (Maximum Power Point) UPS function, 10ms switching time Intelligent load management via potential-free contact Scalable system configuration VPP interface ready Intelligent remote monitoring and maintenance Supports lithium and lead-acid batteries DC/AC ratio up to 1.5 LCD+LED display Complies with ce, VDE0126-1-1, among others Hybrid inverter Compared to conventional inverters, hybrid inverters offer the option of not only feeding the generated solar power into the grid, but also storing it in batteries. This means that the stored solar power can be used even when the sun is not shining. Another function of hybrid inverters is to optimize a household's electricity consumption by primarily using the solar power generated directly in the household before it is fed into the grid. This leads to a reduction in energy costs and less dependence on expensive grid electricity. Operating modes - configurable according to system requirements Online mode Different operating modes can be set for optimum system integration of the sph inverter. When entered directly on the device, a priority mode can only be set for one time period. When using the online platform, up to three time periods can be set for the priority mode (a chargeable accessory is required to use this function). Load first:With the standard "Load first" mode, the connected loads (consumers) are supplied with energy first. As soon as the PV energy is sufficient for the load, the surplus energy is fed into the battery. If the battery is fully charged or none is connected, the remaining energy is fed into the grid. Battery first:In this mode, the inverter first fully charges the battery with the maximum possible solar power. If the PV power is not sufficient, the grid charging function can also be activated. Grid first:In this mode, the PV energy generated is fed into the grid first. The on and off time of the mode can be set here, as well as the power rate. Backup mode: If there is no longer any mains voltage at the device, e.g. due to a short-term power failure or blackout, the Growatt sph automatically switches to backup mode. This ensures that the AC output is supplied via the EPS-LOAD connection. The required energy is only supplied via the Solarasystem and the battery. If the PV system also fails, the battery secures the AC supply until it is discharged. If required, the automatic switch to this mode can also be deactivated. Maximum Power Point Tracking Maximum Power Point Tracking (mppt) technology is used to achieve the optimum yield in a Solarasystem. The MIC inverter has an mppt that sets the ideal ratio between voltage and current over the course of the day according to the solar radiation and the module temperature of the solar modules. Thanks to the wide MPPT voltage range, many solar modules can be connected, which enables efficient energy generation. This advantage is particularly evident when the sky is partly cloudy and the light intensity is constantly changing. Intelligent load management The inverter's integrated intelligent load management enables efficient and precise control of energy consumption. Electrical loads can be intelligently controlled and prioritized via the potential-free contact. This function makes it possible to automatically detect the energy demand and make optimum use of the available energy. Intelligent load management ensures optimum distribution of energy and thus contributes to efficient use. With intelligent load control via the dry contact, the inverter is able to optimize the energy flow and ensure efficient operation of your Solarasystem. Growatt monitoring platform The Growatt monitoring platform can be used with the optional Shine series accessories. This is available as a smartphone app (for iOS and Android) and as a web version. The Shine accessories must be purchased separately, use of the platform is free of charge. you can configure and monitor all your Growatt products via Shine, and it is also possible to display self-consumption and trends. The following Shine options are compatible with the sph series: ShineWiFi-X ShineLink-X Shine4G-X ShineMaster Technical data Recommended module power: up to 7600 W Max. DC voltage: 550 V Starting voltage: 120 V MPPT voltage range: 120-550 V/360 V Battery voltage range: 42~59 V Max. Charge/discharge current: 85 A Continuous charging/discharging power: 4000 W Rated AC power: 4000 W Max. Apparent power: 4000 VA Max. AC output power: 4000 W Max. Output current: 17.4 A AC nominal voltage range: 230v (180Vac-270Vac) AC mains frequency range: 50/60 Hz (45Hz-55Hz/55Hz-65Hz) Enclosure rating: IP65 Manufacturer's warranty: 10 years Maximum efficiency of 97.3% Dimensions: 420 x 560 x 180mm Weight: 31 kg Scope of delivery 1x Growatt sph 4000ktl bl-up inverter

The Growatt sph4600tl bl-up hybrid inverter supports solar modules with an output of up to 8200w. It offers a scalable system configuration and a UPS function with a switchover time of 10ms. In addition, the single-phase inverter enables intelligent load management via a potential-free contact. With these functions, the inverter offers a flexible and reliable solution for solar projects. about the sph 4600ktl bl-up inverter Two MPP trackers (Maximum Power Point) UPS function, 10ms switching time Intelligent load management via potential-free contact Scalable system configuration VPP interface ready Intelligent remote monitoring and maintenance Supports lithium and lead-acid batteries DC/AC ratio up to 1.5 LCD+LED display Complies with ce, VDE0126-1-1, among others Hybrid inverter Compared to conventional inverters, hybrid inverters offer the option of not only feeding the generated solar power into the grid, but also storing it in batteries. This means that the stored solar power can be used even when the sun is not shining. Another function of hybrid inverters is to optimize a household's electricity consumption by primarily using the solar power generated directly in the household before it is fed into the grid. This leads to a reduction in energy costs and less dependence on expensive grid electricity. Operating modes - configurable according to system requirements Online mode Different operating modes can be set for optimum system integration of the sph inverter. When entered directly on the device, a priority mode can only be set for one time period. When using the online platform, up to three time periods can be set for the priority mode (a chargeable accessory is required to use this function). Load first:With the standard "Load first" mode, the connected loads (consumers) are supplied with energy first. As soon as the PV energy is sufficient for the load, the surplus energy is fed into the battery. If the battery is fully charged or none is connected, the remaining energy is fed into the grid. Battery first:In this mode, the inverter first fully charges the battery with the maximum possible solar power. If the PV power is not sufficient, the grid charging function can also be activated. Grid first:In this mode, the PV energy generated is fed into the grid first. The on and off time of the mode can be set here, as well as the power rate. Backup mode: If there is no longer any mains voltage at the device, e.g. due to a short-term power failure or blackout, the Growatt sph automatically switches to backup mode. This ensures that the AC output is supplied via the EPS-LOAD connection. The required energy is only supplied via the Solarasystem and the battery. If the PV system also fails, the battery secures the AC supply until it is discharged. If required, the automatic switch to this mode can also be deactivated. Maximum Power Point Tracking Maximum Power Point Tracking (mppt) technology is used to achieve the optimum yield in a Solarasystem. The MIC inverter has an mppt that sets the ideal ratio between voltage and current over the course of the day according to the solar radiation and the module temperature of the solar modules. Thanks to the wide MPPT voltage range, many solar modules can be connected, which enables efficient energy generation. This advantage is particularly evident when the sky is partly cloudy and the light intensity is constantly changing. Intelligent load management The inverter's integrated intelligent load management enables efficient and precise control of energy consumption. Electrical loads can be intelligently controlled and prioritized via the potential-free contact. This function makes it possible to automatically detect the energy demand and make optimum use of the available energy. Intelligent load management ensures optimum distribution of energy and thus contributes to efficient use. With intelligent load control via the dry contact, the inverter is able to optimize the energy flow and ensure efficient operation of your Solarasystem. Growatt monitoring platform The Growatt monitoring platform can be used with the optional Shine series accessories. This is available as a smartphone app (for iOS and Android) and as a web version. The Shine accessories must be purchased separately, use of the platform is free of charge. you can configure and monitor all your Growatt products via Shine, and it is also possible to display self-consumption and trends. The following Shine options are compatible with the sph series: ShineWiFi-X ShineLink-X Shine4G-X ShineMaster Technical data Recommended module power: up to 8200 W Max. DC voltage: 550 V Starting voltage: 120 V MPPT voltage range: 120-550 V/360 V Battery voltage range: 42~59 V Max. Charge/discharge current: 85 A Continuous charging/discharging power: 4000 W Rated AC power: 4600 W Max. Apparent power: 4600 VA Max. AC output power: 4000 W Max. Output current: 17.4 A AC nominal voltage range: 230v (180Vac-270Vac) AC mains frequency range: 50/60 Hz (45Hz-55Hz/55Hz-65Hz) Enclosure rating: IP65 Manufacturer's warranty: 10 years Maximum efficiency of 97.4% Dimensions: 420 x 560 x 180mm Weight: 31 kg Scope of delivery 1x Growatt sph 4600ktl bl-up inverter