Growatt APX Batteriebasis Hochvoltbatterie

Auf dem AXE 5.0L Batterie Sockel von Growatt können bis zu 10 Growatt AXE LV-Batterien (MPN AXE 5.0L) in einem Turm gestapelt werden und somit Speicherkapazitäten von 5kWh bis 50kWh verbunden werden. AXE Batterie-Basis Für die Bodenmontage von Growatt AXE Batterien Für bis zu 10 AXE 5.0L Batterien geeignet Je Batterieturm eine Basis Abmessungen (B/H/T): 654/25/353 mm Das AXE-Battriesystem Das modulare Batteriesystem verfügt über ein integriertes Stecksystem, so dass durch die stapelbare Installation keine zusätzlichen Kabelverbindungen nötig sind. Es können bis zu 10 Batterien zusammen gesteckt und max. 8 Türme im Verbund betrieben werden. Somit bietet das System eine flexible Kapazität zwischen 5kWh und 400kWh und lässt sich mit nur einem einzigen Kabelstrang an den Wechselrichter anschließen, da alle externen Kabel in einem Stecker integriert sind. Lieferumfang: 1x AXE 5.0L Batteriebasis

The ark high-voltage storage system from Growatt is flexible due to its modular concept and can be expanded as needed. A battery tower can be set up with a minimum of 2 to a maximum of 10 ark high-voltage batteries. For commissioning with a compatible inverter, a bms control unit and a connection cable set are included. For ground installation, the battery base is also available as an option.The Growatt high voltage battery system includes:ark 2.5h-a1 high voltage battery LiFePO4 2.56kWh (2-10x depending on selection)bdc 95045-a1 bms control unitConnection cable set ark battery to inverterOptional: Battery base ground installationCompatible invertersGrowatt min-xhGrowatt mod-xhMIN 2500tl-xh hybrid inverter pv 2500w 1-phaseMOD 4ktl3-xh 4kW hybrid inverter 3-phaseMIN 3000tl-xh hybrid inverter pv 3000w 1-phaseMOD 5ktl3-xh 5kW hybrid inverter 3-phaseMIN 3600tl-xh hybrid inverter pv 3600w 1-phaseMOD 7ktl3-xh 7kW hybrid inverter 3-phaseMIN 4200tl-xh hybrid inverter pv 4200w 1-phaseMOD 9ktl3-xh 9kW hybrid inverter 3-phaseMIN 4600tl-xh hybrid inverter pv 4600w 1-phaseMOD 10ktl3-xh 10kW hybrid inverter 3-phaseark 2.5h-a1 high voltage batteryGrowatt ark 2.5h-a1 high voltage battery (mpn ark-2.5h-a1) is a LiFePO4 storage battery with high cycle stability and long lifetime. The modular, stackable design allows flexible application for different scenarios and is easy to install. The battery offers excellent performance under heavy load and is also suitable for outdoor installation with its ip65 protection. To avoid overvoltages in the system, the soft start is used.About the ark 2.5h-a1 battery:Modular, stackable battery conceptCobalt-free lithium iron phosphate (LFP)High cycle stability and long service lifeWall or floor installation possibleSoft start to protect the system from overvoltagesAutomatic wake-up in case of undervoltageProtection class ip65 for outdoor installationRemote diagnostics and firmware updateAreas of applicationFor grid-connected as well as stand-alone photovoltaic systemsEmergency power supplyUninterruptible power supplies (usv / UPS)Softstart to protect the systemThe soft start mechanism is a protective function used on the Growatt battery to protect the system from overvoltages. When the battery is started or turned on, the power supply is gradually increased to protect the system from damage that could be caused by a sudden voltage spike. This ensures smooth and safe operation of the battery system.High cycle lifeGrowatt ark battery modules are an ideal storage solution for photovoltaic systems due to their extremely high cycle life and the use of LiFePo4 cells. Regardless of whether it is a grid-tied or off-grid system, Growatt storage offers numerous advantages over traditional lead-acid batteries and other lithium technologies.Technical Data:Battery type: cobalt-free lithium iron phosphate (LiFePo4)Energy capacity: 2.56?kWhUsable capacity: 2.3?kWhRated voltage: 51.2?VOperating voltage range: 47.2-56.8?VCharge/discharge current: 25?A/0.5?CProtection class: ip65Temperature range: -10~50° CDimension: 650 x 260 x 180 mmWeight: approx. 28 kg10 years manufacturer warrantyCertificates: iec62619, ce, cec, rcm, UN38.3bms control unitThe Growatt bdc 95045-a1 bms acts as a central monitoring and control unit within the ark high-voltage battery system and supports communication with Growatt min and mod xh inverters. It allows the connection of up to 10 battery modules with an individual capacity of 2.56 kWh. These modules can be connected in series to form a battery tower that has a total capacity of up to 25.64 kWh. Storage towers can also be connected together, requiring one bms per tower.About the bdc 95045-a1 bmsCompatible with Growatt min-xh and mod-xh invertersModular, stackable battery designMonitoring and controlbms control parametersControl parameters include state of charge (soc), line voltage, current, cell voltage, cell temperature and PCBA temperature measurement. By precisely monitoring these parameters, the bms ensures optimal battery performance and longevity.Flexible expansionGrowatt's ark battery system offers great flexibility through its expandable configuration options, which range from 2.56 kWh to 25.6 kWh. Installation and expansion of the system is simple and straightforward due to its modular design and use of cables. Another innovation of the ark system is that, unlike other battery systems, no battery cabinet is required. Only a battery base is required for a stable stand.Technical data:Protection class: ip65Temperature range: -10~50° CDimension: 650 x 260 x 185 mmCommunication: CANWeight: 8 kg10 years manufacturer warrantyConnection cable set to inverterThe Growatt battery cable set is needed to connect Growatt ark2.5h-a1 batteries to min- or mod-xh series inverters.2x 2m power cable (plus/minus)2m communication cable2m ground wireark battery baseThe Growatt ark battery base is suitable for ground installation of Growatt ark battery modules and provides a secure stand for the battery tower. The Growatt ark system is modular, meaning that multiple batteries can be combined, with the Growatt Base serving as the foundation. Up to 10 storage modules, as well as the associated bms, can be stacked on one base.for base mounting of Growatt ark hv and xh batteriesone base per battery towerWeight: 3kg

The ark high-voltage storage system from Growatt is flexible due to its modular concept and can be expanded as needed. A battery tower can be set up with a minimum of 2 to a maximum of 10 ark high-voltage batteries. For commissioning with a compatible inverter, a bms control unit and a connection cable set are included. For ground installation, the battery base is also available as an option.The Growatt high voltage battery system includes:ark 2.5h-a1 high voltage battery LiFePO4 2.56kWh (2-10x depending on selection)bdc 95045-a1 bms control unitConnection cable set ark battery to inverterOptional: Battery base ground installationCompatible invertersGrowatt min-xhGrowatt mod-xhMIN 2500tl-xh hybrid inverter pv 2500w 1-phaseMOD 4ktl3-xh 4kW hybrid inverter 3-phaseMIN 3000tl-xh hybrid inverter pv 3000w 1-phaseMOD 5ktl3-xh 5kW hybrid inverter 3-phaseMIN 3600tl-xh hybrid inverter pv 3600w 1-phaseMOD 7ktl3-xh 7kW hybrid inverter 3-phaseMIN 4200tl-xh hybrid inverter pv 4200w 1-phaseMOD 9ktl3-xh 9kW hybrid inverter 3-phaseMIN 4600tl-xh hybrid inverter pv 4600w 1-phaseMOD 10ktl3-xh 10kW hybrid inverter 3-phaseark 2.5h-a1 high voltage batteryGrowatt ark 2.5h-a1 high voltage battery (mpn ark-2.5h-a1) is a LiFePO4 storage battery with high cycle stability and long lifetime. The modular, stackable design allows flexible application for different scenarios and is easy to install. The battery offers excellent performance under heavy load and is also suitable for outdoor installation with its ip65 protection. To avoid overvoltages in the system, the soft start is used.About the ark 2.5h-a1 battery:Modular, stackable battery conceptCobalt-free lithium iron phosphate (LFP)High cycle stability and long service lifeWall or floor installation possibleSoft start to protect the system from overvoltagesAutomatic wake-up in case of undervoltageProtection class ip65 for outdoor installationRemote diagnostics and firmware updateAreas of applicationFor grid-connected as well as stand-alone photovoltaic systemsEmergency power supplyUninterruptible power supplies (usv / UPS)Softstart to protect the systemThe soft start mechanism is a protective function used on the Growatt battery to protect the system from overvoltages. When the battery is started or turned on, the power supply is gradually increased to protect the system from damage that could be caused by a sudden voltage spike. This ensures smooth and safe operation of the battery system.High cycle lifeGrowatt ark battery modules are an ideal storage solution for photovoltaic systems due to their extremely high cycle life and the use of LiFePo4 cells. Regardless of whether it is a grid-tied or off-grid system, Growatt storage offers numerous advantages over traditional lead-acid batteries and other lithium technologies.Technical Data:Battery type: cobalt-free lithium iron phosphate (LiFePo4)Energy capacity: 2.56?kWhUsable capacity: 2.3?kWhRated voltage: 51.2?VOperating voltage range: 47.2-56.8?VCharge/discharge current: 25?A/0.5?CProtection class: ip65Temperature range: -10~50° CDimension: 650 x 260 x 180 mmWeight: approx. 28 kg10 years manufacturer warrantyCertificates: iec62619, ce, cec, rcm, UN38.3bms control unitThe Growatt bdc 95045-a1 bms acts as a central monitoring and control unit within the ark high-voltage battery system and supports communication with Growatt min and mod xh inverters. It allows the connection of up to 10 battery modules with an individual capacity of 2.56 kWh. These modules can be connected in series to form a battery tower that has a total capacity of up to 25.64 kWh. Storage towers can also be connected together, requiring one bms per tower.About the bdc 95045-a1 bmsCompatible with Growatt min-xh and mod-xh invertersModular, stackable battery designMonitoring and controlbms control parametersControl parameters include state of charge (soc), line voltage, current, cell voltage, cell temperature and PCBA temperature measurement. By precisely monitoring these parameters, the bms ensures optimal battery performance and longevity.Flexible expansionGrowatt's ark battery system offers great flexibility through its expandable configuration options, which range from 2.56 kWh to 25.6 kWh. Installation and expansion of the system is simple and straightforward due to its modular design and use of cables. Another innovation of the ark system is that, unlike other battery systems, no battery cabinet is required. Only a battery base is required for a stable stand.Technical data:Protection class: ip65Temperature range: -10~50° CDimension: 650 x 260 x 185 mmCommunication: CANWeight: 8 kg10 years manufacturer warrantyConnection cable set to inverterThe Growatt battery cable set is needed to connect Growatt ark2.5h-a1 batteries to min- or mod-xh series inverters.2x 2m power cable (plus/minus)2m communication cable2m ground wireark battery baseThe Growatt ark battery base is suitable for ground installation of Growatt ark battery modules and provides a secure stand for the battery tower. The Growatt ark system is modular, meaning that multiple batteries can be combined, with the Growatt Base serving as the foundation. Up to 10 storage modules, as well as the associated bms, can be stacked on one base.for base mounting of Growatt ark hv and xh batteriesone base per battery towerWeight: 3kg

The battery control unit and basis of byd provides protection, monitoring and a secure base for the byd battery box premium storage system. This small set of 2 components can be used for the hvs and for the hvm battery box.The new system generationThe new byd generation is based on the proven storage systems and offers all the previous functions. The Battery-Box Premium hvs and Battery-Box Premium hvm each bring a battery module to the market that has a higher storage capacity than its predecessor. The further development of the cell technology has reduced the system weight by almost 30% and the installation depth by 8 cm, which requires less floor space and results in a slimmer appearance. A highlight of the new storage units is their IP55 protection class, which allows them to be used outdoors. In addition, the new generation offers even more flexibility and scalability. Up to three battery towers can now be connected to form a system. In terms of charging and discharging capacity, byd remains true to its line, as each battery can also deliver its nominal capacity as power, i.e. 1c. This makes the new series ideal for on-grid, on-grid plus backup and off-grid systems.Modular battery systemThe hvs Battery-Box can be configured with 2 to 5 hvs battery modules arranged in a series connection. This allows a capacity of 5.1 to 12.8kWh to be achieved. To achieve the maximum capacity of 38.4kWh, up to 3 identical hvs towers can be connected directly in parallel. It is also possible to expand the system later by adding further hvs modules or parallel hvs towers.The hvm Battery-Box can be configured with 3 to 8 hvm battery modules arranged in a series connection. This allows a capacity of 8.3 to 22.1kWh to be achieved. To achieve the maximum capacity of 66.2kWh, up to 3 identical hvm towers can be connected directly in parallel. It is also possible to expand the system later by adding further hvm modules or parallel hvm towers.Supplied with power at all times: byd backup power and off-grid functionThe B-Boxes hvs and hvm are extremely versatile and can be used in both on-grid and off-grid systems. Their integrated emergency power function is particularly practical and often in demand. This enables the B-Box to supply the entire household with power in the event of a power failure, either on one or three phases. The prerequisite for this is a compatible hybrid or storage inverter that supports both an emergency power and an off-grid function. A list of compatible inverters can be found in the "Downloads" section.Power and storage capacity: scalability made easybyd attaches great importance to the scalability of its storage systems. The new B-Boxes hvs and hvm are easy to retrofit and enable simple expansion. A simple plug-in connection eliminates any cable clutter and unnecessary complexity in the product design. It is possible to add additional memory modules. Furthermore, by connecting up to three storage towers in parallel, a maximum storage capacity of 38.4 kWh can be achieved with the hvs and 66.2 kWh with the hvm. It is important to note that each storage tower must have the same number of modules.Technical parametersControl unit dimensions: 180 x 585 x 298 mmBase dimensions: 100 x 585 x 298 mmWeight: 15 kgProtection class: IP55Max. Discharge depth: 100%Manufacturer's warranty: 10 yearsScope of delivery:1x byd battery control unit + base