Bluetti d100s Solar Charge Controller and b210 battery 2150Wh

The Steca PRS 2020 charge controller is perfectly suited for PV-systems to charge 12V or 24V lead batteries. Protection functions: overload deep discharge battery undervoltage current reflow into the module Protection from application errors: short-circuit/reverse polarity at solar module short-circuit at consumer output (excessive consumption) reverse polarity at battery overcurrent at solar module overtemperature overvoltage at consumer output wrong connection order Note: The default battery type can only be adjusted with additional equipment (Steca PA PR100).The PRS-series's default battery type is lead-acid (liquid).If you want to use the controller to charge AGM or gel batteries please use the contact formular during your order or contact our customer: [email protected] / +49 (0) 8721 98297-40

The Battery Charger VBCS Triple is a brand new type of device combination to ensure the energy supply in your caravan. It consists of a pb-grid-charger, VCC charging converter and MPP solar charge controller. The batteries are always charged automatically no matter if driving or parking. Especially the high charging performance (30A) of the integrated charging converter allows full charging of your batteries even on short drives. The VBCS Triple series provides the same quality, features and functions as the Votronic single devices and comes with a very compact and light design. These devices save costs and space within your caravan - installation, connection and wiring are reduced to a minimum. Important product features: integrated VCC charging converter 30A integrated Pb-grid- charger 20A integrated MPP solar charge controller for a max. module performance of 250W charges 1 supply battery, 1 starter battery or 2 supply batteries or 2 starter batteries constant full-automated charging very secure operation, soft battery charging 8 charging curves for acid, gel, AGM and modern LiFePO4 batteries control input for LiFePO4 - BMS for charging stop the charging voltages are free from spikes and controlled in a way to prevent from overloads precise battery temperature compensation, temperature sensor 825 included smart micro processor controlling considers connected consumers automatical battery recharge during longer standing times (twice a week) integrated battery pulser compensation of voltage loss (cables) for exact charging voltage reliable technique and compact design easy setup and short cabling plug&play connection for LCD-Charge Control S Suitable for all common battery sizes three different device combinations are available. All devices provide 8 charging curves for lead-acid, gel and AGM batteries as well as lithium-LiFePO4. The integrated battery trainer keeps the batteries maintained during longer standing times. LCD Charge Computer 1247 (optional)Especially designed for this device the LCD display and control unit shows important information. Additionally the charger can be adjusted to the power supply of the caravans pitch. Technical Data: Integrated MPP dual charge controller module performance: 40 - 250Wp Module amp max.:  15.0A Module voltage (Voc) max.: 28V Charging amp supply-/starter battery max.: 18.0/4.0A Integrated charger: operating voltage: 110 - 230V AC 45.65Hz (worldwide) Max. power consumption: 360W Charging amp supply-/starter battery max.: 20/4A Integrated 12V712V battery to battery VCC charging converter charging performance on-board battery max.: 30A automatic activation D+ / ignition starter battery LiMa voltage range (Euro6) / max. current: 11 - 16V/42A

The Victron PWM-Light 12V 24V 30A (MPN SCC010030020) is a reasonable-priced PWM charge controller that was especially developed to control lighting systems. There are several possibilities to configure the switching-off/on of these DC consumers. Of course with this charge controller other things like ventilation can be controlled. Please check the manual for detailled information about the possible configurations.   Important product features: Load output with low battery voltage disconnect function. Lighting control function, one timer only. Two digit seven segment display for quick and easy setting of the load output functionality, including timer setting. Three stage battery charging (bulk, absorption, float), not programmable. Load output protected against over load and short circuit. Protected against reverse polarity connection of the solar array and/or battery. Day/night timing options: see manual for details Delivery scope: 1x Victron Energy SCC010030020 PWM-Light 12/24-30A 1x Manual

The lfp-bms 12.8v 200Ah (mpn BAT512120610from Victron Energy is a LiFePO4 battery of the latest generation. When fully charged, lfp 12.8/200 stores a whopping 2560Wh of power with a very low self-discharge rate and superior cycle life. The lfp battery family from Victron already features integrated cell balancing and a bms (battery management system) interface. important technical data of the lfp bms 12.8v 200Ah: Rated voltage: 12.8v Victron Part number: BAT512120610 Rated energy at 25°C*: 2560Wh Rated capacity at 25°C/0°C/-25°C: 200Ah / 160Ah / 100Ah Number of cycles at 80%/70%/50% depth of discharge: 2500 / 3000 / 5000 cycles recommended continuous discharge current: <=200A maximum continuous discharge current: 500A Weight: 20kg Connection terminal: M10 For more technical data, please refer to the official data sheet and below in the "technical data" section. Efficient and economical: the lfp-bms 12.8v 200Ah Although Victrons lfp-batteries are expensive compared to AGM batteries or GEL batteries, the higher purchase cost will more than pay off in most cases. With a service life of up to 5000 cycles, they exceed the maximum service life of even the best lead-acid batteries many times over. In addition, the lfp 12.8/200 scores 70% in terms of space savings and weight savings. The energy efficiency of 92% is also significantly higher than the 80% of lead-acid batteries, which can be essential for off-grid systems, especially for off-grid solar and/or wind power plants. Multi-talented: infinitely flexible with lithium technology from Victron Energy lfp lithium batteries from Victron can be integrated into almost all common applications. In the mobile sector, this technology has played an important role for quite some time. But thanks to the fact that these batteries are much easier to charge than conventional lead-acid batteries and that irregular charging cannot harm them, they are also making their way into land applications and can now be found in almost all system classes. Parallel and series connection up to max. 3000ah at 48v Thanks to the integrated cell balancing and cell monitoring function, you can easily connect up to 10 batteries of this type in parallel and up to 4 blocks of 10 in series, resulting in a maximum of 3000 Ah at 48 V - this corresponds to a maximum storable nominal energy of around 154,000 Wh. 5 models available in total The lfp-bms family consists of a total of 5 models. In addition to the lfp 12.8/200, there are the following other power classes: 12.8v 60Ah LiFePO4 768Wh 12.8v 90Ah LiFePO4 1152Wh 12.8v 160Ah LiFePO4 2048Wh 12.8v 300Ah LiFePO4 3840Wh IMPORTANT NOTICE: The use of an additional bms is mandatory to interrupt or shut down the load when the voltage of a battery cell drops below 2.5v or to stop charging when the voltage of a battery cell rises above 4.2v and to shut down the system when the temperature of the cell exceeds 50°C. For this you have the choice between the bms 12/200 and the VE.Bus bms - For further details of the devices, please refer to the respective item descriptions.Due to the classification as dangerous goods, this product is shipped by freight forwarding! Scope of delivery: 1x LiFePO4 battery lfp-CB 12,8/200, Victron Energy BAT512120610 1x instruction manual more resources about lithium batteries: Victron LiFePO4 Batterien - All product families from the LiFePO4 battery category of VE Category Lithium Batteries - Total program with all available batteries from this range

The LiFePO4 25.6v 100Ah Smart battery from Victron Energy (mpn bat524110610) is a latest generation LiFePO4 battery. When fully charged, the LiFePO4 25.6/100 Smart stores a whopping 2560Wh of power, with very low self-discharge and superior cycle life. The LifePO4 battery family from Victron already features integrated cell balancing and a bms (battery management system) interface. The integrated Bluettoth for connection with the Li-Ion App completes the overall package. Features LiFePO4 25.6v 100Ah Smart Battery Rated voltage: 25.6v Built-in Bluetooth to connect with Victron Li-Ion app Rated energy at 25°c: 2560Wh Rated capacity at 25°c / 0°c / -20°c: 100Ah / 80Ah / 50Ah Number of cycles at depth of discharge 80% / 70% / 50%: 2500 / 3000 / 5000 Max. continuous discharge current: 200a Recommended continuous discharge current: <100a Weight: 28 kg Dimensions: 197 x 650 x 163 mm For more technical data, see the official data sheet and below in the "technical data" section. Efficient, economical..: LiFePO4 25.6v 100Ah Smart Battery While LiFePO4 batteries are expensive compared to agm or gel batteries, the higher initial cost will more than pay for itself in most cases. With a lifetime of up to 5000 cycles, they exceed the max. lifetime of even the best lead-acid batteries many times over. In addition, the lfp 25.6/100 scores 70% in terms of space savings and weight savings. The energy efficiency of 92% is also significantly higher than the 80% of lead-acid batteries, which can be of essential importance for off-grid systems, especially for off-grid solar and/or wind power plants. Multi-talented: infinitely flexible with lithium technology from Victron Energy LiFePO4 smart batteries from Victron can be implemented in almost all common applications. In the mobile sector, this technology has played an important role for quite some time. But thanks to the fact that these batteries are much easier to charge than conventional lead-acid batteries and that irregular charging cannot harm them, they are also making their way into land applications and can now be found in almost all system classes Parallel and series connection up to max. 1000Ah at 48v Thanks to the integrated cell balancing and cell monitoring function, you can easily connect up to 10 batteries of this type in parallel and up to 4 blocks of 10 in series, resulting in a maximum of 1000Ah at 48v Integrated Bluetooth for smart handling Cell voltages, temperature and alarm status can be monitored via Bluetooth. This is very useful to detect a (possible) problem like cell imbalance in time.Important notice: The use of an additional bms is mandatory to interrupt/shut down the load when the voltage of a battery cell drops below 2.5v or to stop charging when the voltage of a battery cell rises above 4.2v and to shut down the system when the temperature of the cell exceeds 50°c.For this you have the choice between the bms 12/200 and the VE.Bus bms - for further details of the devices, please refer to the respective article descriptions Due to the classification as dangerous goods, this product will be shipped by freight forwarding!Scope of delivery: 1x Victron Energy bat524110610 25,6v 100Ah Smart Battery1x Instruction manual

The mppt pro-x solar charge controller 20a (mpn: 017375) from Offgridtec sets new standards for your solar supply. The latest generation controller from Offgridtec impresses with high efficiency and flexibility, as well as reliable performance, combined with comprehensive protection and simple monitoring options. The advanced mppt technology and ultra-fast tracking speeds ensure an impressive minimum efficiency of 99.5% for maximum yields. This makes the innovative high-end solar controller ideal for use in household systems, field monitoring, UPS, emergency power supply, telecommunications or lighting, as well as for use in mobile homes or on boats. Highlights of the mppt pro-x 20a Highly developed mppt technology with 99.5 % minimum efficiency Max. dc/dc transfer efficiency of up to 98.2%, full load efficiency of up to 96.2% Advanced mppt control algorithm to minimize MPP loss rate and loss time Precise detection and tracking of the Multiple Peak Maximum Power Point Max. 20a charging current, suitable for 12v and 24v systems Supports lead-acid and modern lithium-ion batteries Alternatively also available with 10a, 30a and 40a charging current Battery temperature compensation function Automatic limitation of charging power and charging current Real-time energy statistics function Full load operation without capacity reduction in the operating temperature range overheating protection function, multiple load mode and extensive electronics protection RS-485 communication bus interface with 5VDC power supply and professional protection chip incl. Modbus communication protocol, overcurrent and short-circuit protection Protection class IP33 Integrated LCD display Reliable, flexible and safe The Offgridtec mppt pro-x solar charge controller is a versatile powerhouse. It is compatible with lead-acid and lithium-ion batteries and enables local adjustment of the voltage parameters for bcv, fcv, lvd and lvr. The charging power and charging current limiting function and the automatic reduction of the charging power ensure stability, even with oversized PV modules or high temperatures. In addition, it ensures stable performance within the operating temperature range at full load without loss of capacity. The IP33 protection standard and the isolated RS485 design improve the reliability and safety of the controller. The multiple load mode and extensive electronic and overheating protection functions provide protection against damage to the solar controller and connected devices. High quality and advanced The solar charge controller of the pro-x series is equipped with high-quality st and IR components from renowned brands, which guarantees a long service life and high reliability. The 3-stage charging mode based on a digital control circuit effectively extends battery life, significantly increases system performance and offers comprehensive protection against system or installation errors that could cause damage to components. This leads to increased operational safety and a longer service life for the entire solar power supply system. In addition, the intuitive control via PC software or mobile apps enables simple remote monitoring and control of the system. Ultra-fast maximum power point tracking Especially under changing light conditions, such as overcast skies, an extremely fast mppt controller significantly increases the energy yield and ensures a minimum efficiency of 99.5%. With the optimized mppt control algorithm, the Offgridtec controllers from the pro-x series minimize the MPP loss rate as well as the MPP loss time and precisely track the maximum power point (Multiple Peaks Maximum Power Point) of the PV system. This guarantees the optimum use of solar energy under all conditions and increases the energy utilization ratio by 10-30 % compared to the PWM charging method. Technical data System nominal voltage: 12/24vDC Auto Nominal charging current: 20a Nominal discharge current: 20a Battery voltage: 8 ~32V max. PV open-circuit voltage: 100V/92V MPP voltage range: ~72v / battery voltage +2V Nominal charging power: 260W/12v 520W/24v max. conversion efficiency: 98.3% Full load efficiency: 96.4% Self-consumption: ≤30mA(12v) ≤16mA(24v) Voltage drop in the discharge circuit: ≤0.23V RS485 interface: 5VDC/200mA (RJ45) Temperature compensation coefficient: -3mV/?/2V Grounding: standard negative earthing Connection: 6AWG(16mm²) recomm. Cable: 10AWG(6mm²) Dimensions: 217×158×56.5 mm Weight: 0.96 kg Scope of delivery: 1× Offgridtec 1-01-017375 mppt pro-x 20a 1× operating instructions

The ab2000 from Zendure is an auxiliary battery that uses LiFePO4 technology to store excess energy generated by a balcony power plant. Thanks to its SolarFlow function, the use of solar energy via a mini-photovoltaic system is no longer limited to the daytime. The energy generated is first used to supply the electrical consumers. The surplus electricity is stored in the batteries and can therefore also be used in the evening or when there is little sunlight.The SolarFlow ab2000 batteries require additional components for use. These include the Smart pv Hub (sold separately), at least one solar panel and a micro inverter. Here you can find suitable systems. About the ab2000 add-on batteryTotal capacity of 7,680 Wh possible (modular expansion)Compatible with the Zendure ab1000 add-on batteryip65 waterproof protectionMonitoring and control via app possible10-year manufacturer's warrantySimple integrationHow does SolarFlow work?During the day the pv hub directs the energy generated by the pv modules to the micro inverter, which converts it into alternating current to power household appliances. The surplus energy is intelligently stored in the batteries so that it can be used at night. This results in potential savings of up to 32% on your annual electricity bill. The intelligent control system ensures efficient storage of the surplus energy. The pv hub supplies 600w to the micro inverter as standard, with a range of 100w to 1200w that can be adjusted as required to fully cover electricity demand during peak periods.At night the stored surplus energy from the batteries is used. The capacity of the batteries can be expanded to up to 7,680Wh if required. This energy supply makes it possible to power a wide range of devices, from power-hungry ones such as air conditioners and refrigerators to devices such as WLAN routers, lamps, laptops and many others.Compatible with a wide range of balcony power stationsThanks to the universal MC4 connectors, SolarFlow is compatible with 99% of balcony power stations. This includes popular brands such as Hoymilesdeye, Priwatt etc. This seamless integration saves time and money as existing balcony power stations can also be easily and quickly combined with the SolarFlow. Due to the compact, stackable design, little space is required for installation and cabling is kept to a minimum.Waterproof protectionThe PowerHub and the batteries are protected by a robust metal surface and have an ip65 protection class, which offers complete protection against dust and water. The set can be installed both inside and outside the home.Zendure appThe Zendure app allows you to monitor the SolarFlow and change settings. The information is displayed in real time, including weather and green electricity consumption, so that you can make the optimum configuration for your system. The app can also be used to retrieve historical data.Technical data ab2000Capacity: 1920Wh (40Ah / 48V)Battery type: LiFePO4Max. Extension capacity: 4 x 1920Wh = 7680 WhCharging temperature Discharge: -20°C - +55°CTemperature: -20°C - +60°CProtection class: ip65Weight: 25 kgDimensions: 450 x 280 x 420mmScope of delivery:1x additional battery ab20001x user manual + warranty certificate