2.58kWp Solaranlage with 300l Fothermo boiler for hot water preparation

The Offgridtec 440w Solaranlage with 10l Fothermo boiler (mpn 4-01-014140) is the perfect solar set for self-sufficient hot water supply in your garden or mountain hut and really leaves nothing to be desired. No specialist is required for installation and the installation of a solar module is done in a few simple steps. 440w Solaranlage with 10l Fothermo boiler complete set The set contains all the components you need for your hot water supply. You have hot water in the sink, shower or kitchen. No connection to the mains is required. Components of the Offgridtec 4400w Solaranlage with 10l Fothermo boiler 1xJinko Tiger Neo 440w 1x Fothermo Photovoltaic water boiler 10 liters - Water heater 1x 5m 2x6mm² mc4 to mc4 connection cable Fothermo Photovoltaic water boiler 10 liters - water heater With the 10 liter water heater from Fothermo you can produce your hot water with sustainable and cost-effective solar power. The solar modules can be connected in just a few seconds and provide you with a reliable hot water supply. Technical data Fothermo 10l water boiler Volume: 10 liters max. heat output: 550W max. current: 15.5A Protection class: ip X1 Energy efficiency class: A+ Dimensions: 280 x 280 x 440 mm Weight: 7.2 kg The Jinko Tiger Neo 440w Blackframe solar module The Jinko Tiger Neo N-Type is a 440w solar module with monocrystalline cells and N-type technology. The solar cells use super multi-busbar technology. This efficiently reduces the loss due to microcracks, reduces the current transmission path by 50% and improves cell efficiency. The module is manufactured using Hot 2.0 technology. Technical data Jinko Tiger Neo 440w solar module Module voltage (Vmp): 32.81 V Open circuit voltage (Voc): 39.38 V max. current (Imp): 13.41 A Short-circuit current (Isc): 13.86 A max. system voltage: 10000/1500 v/dc (IEC) permissible ambient temperature: -40°C - +85°C Dimensions: 1762 x 1134 x 30 mm Weight: 22 kg Scope of delivery: 1x Jinko Tiger Neo 440w Blackframe solar module 1x Fothermo Photovoltaic water boiler 10 liters - water heater 1x 5m 2x6mm² mc4 to mc4 connection cable

The Offgridtec 440w Solaranlage with 30l Fothermo boiler (mpn 4-01-014145) is the perfect solar set for self-sufficient hot water supply in your garden or mountain hut and really leaves nothing to be desired. No specialist is required for installation and the installation of a solar module is done in a few simple steps. 440w Solaranlage with 30l Fothermo boiler complete set The set contains all the components you need for your hot water supply. You have hot water in the sink, shower or kitchen. No connection to the mains is required. Components of the Offgridtec 440w Solaranlage with 30l Fothermo boiler 1xJinko Tiger Neo 440w Blackframe solar module N-type 1x Fothermo Photovoltaic water boiler 30 liters - Water heater 1x 5m 2x6mm² solar connector connection cable Fothermo Photovoltaic water boiler 30 liters - water heater With the 10L water heater from Fothermo you can produce your hot water with sustainable and cost-effective solar power. The solar modules can be connected in just a few seconds and provide you with a reliable hot water supply. Technical data Fothermo 30l water boiler Volume: 30 liters max. heat output: 550W max. current: 15.5A Protection class: ip 24 Energy efficiency class: A+ Dimensions: 400 x 400 x 600 mm Weight: 15 kg The Jinko Tiger Neo 440w Blackframe solar module The Jinko Tiger Neo N-Type is a 440w solar module with monocrystalline cells and N-type technology. The solar cells use super multi-busbar technology. This efficiently reduces the loss due to microcracks, reduces the current transmission path by 50% and improves cell efficiency. The module is manufactured using Hot 2.0 technology. Technical data Jinko Tiger Neo 440w solar module Module voltage (Vmp): 32.81 V Open circuit voltage (Voc): 39.38 V max. current (Imp): 13.41 A Short-circuit current (Isc): 13.86 A max. system voltage: 10000/1500 v/dc (IEC) permissible ambient temperature: -40°C - +85°C Dimensions: 1762 x 1134 x 30 mm Weight: 22 kg Scope of delivery: 1x Jinko Tiger Neo 440w Blackframe solar module 1x Fothermo Photovoltaic water boiler 30 liters - water heater 1x 5m 2x6mm² mc4 to mc4 connection cable

Die Offgridtec 860W Solaranlage mit 80l Fothermo Boiler (MPN 4-01-014150) ist das perfekte Solar-Set für die autarke Warmwasserversorgung in Ihrer Garten- oder Berghütte und lässt wirklich keine Wünsche offen. Für die Installation wird kein Fachmann benötigt und die Installation eines Solarmoduls ist mit ein paar Handgriffen erledigt. 860W Solaranlage mit 80l Fothermo Boiler Komplett Set Das Set enthält alle Komponenten, die Sie für die Warmwasserversorgung brauchen. Sie haben warmes Wasser im Waschbecken, in der Dusche oder in der Küche. Es ist kein Anschluss an das Stromnetz erforderlich. Komponenten der Offgridtec 860W Solaranlage mit 80l Fothermo Boiler 2x Luxen Solar 430W N5 Mono Bifazial Glas-Glas Full Black Solarmodul 4x 2m 6mm² Solarsteckverbinder-Verbindungskabel Stecker / Buchse Verlängerung 1x Offgridtec 2-fach Abzweigbuchsen Y-Verbinder inkl. Kabelverlängerung (Paar) 1x Fothermo Photovoltaischer Wasser-Boiler 80 Liter - Warmwasserbereiter 1x 5m 2x6mm² Solarsteckverbinder Verbindungskabel Fothermo Photovoltaischer Wasser-Boiler 80 Liter - Warmwasserbereiter Mit dem 80L-Wasser-Boiler von Fothermo können Sie Ihr Warmwasser mit nachhaltigem und kostengünstigem Solarstrom erzeugen. Der Anschluss der Solarmodule ist mit ein paar Handgriffen in wenigen Sekunden erledigt und bietet Ihnen eine zuverlässige Warmwasserversorgung. Technische Daten Fothermo 80l Wasser-Boiler Volumen: 80 Liter max. Heizleistung: 550W max. Strom: 15,5A Schutzklasse: IP 24 Energieeffizienzklasse: A+ Abmessungen: 470 x 480 x 900 mm Gewicht: 25 kg Das bifaziale Luxen Solar 430W Full Black Solarmodul Das monokristalline und bifaziale 430W Full Black Solarmodul der Series N5 von Luxen Solar (MPN LNVB-430ND) überzeugt durch eine Kombination verschiedener Technologien, wie der N-TOPCon Zelltechnologie und einem 108er Halb-Zellen-Layout. Zur Leistungssteigerung wurde bei der Produktion außerdem die SMBB Half-Cut Zelltechnologie angewandt. Das hochmoderne Solarmodul repräsentiert die Spitze der Solartechnologie, indem es eine beeindruckende Leistungsausgabe und niedrige Stromgestehungskosten bietet. Technische Daten maximale Leistung: 430W Modulspannung (Vmp): 32,04V max. Strom (Imp): 13,42A Leerlaufspannung (Voc): 38,96V Kurzschlussstrom (Isc): 14,13A Modulwirkungsgrad: 22,02% Abmessungen: 1722 x 1134 x 30 mm Betriebstemperaturbereich: -40°C bis +85°C Zellen: 108 (6x18) Schutzart IP68 max. Betriebsspannung: 1500V DC Gewicht: 23,5kg Lieferumfang: 2x Luxen Solar 430W N5 Mono Bifazial Full Black Solarmodul 4x 2m 6mm² Solarsteckverbinder-Verbindungskabel Stecker / Buchse Verlängerung 1x Offgridtec 2-fach Abzweigbuchsen Y-Verbinder inkl. Kabelverlängerung (Paar) 1x Fothermo Photovoltaischer Wasser-Boiler 80 Liter - Warmwasserbereiter 1x 5m 2x6mm² Solarsteckverbinder Verbindungskabel

The Offgridtec 430w Solaranlage with 30l Fothermo Hybrid boiler (mpn 018905) is the ideal solar set for your hot water supply and can reduce your electricity costs by up to 100%. The photovoltaic boiler, with its high output of 550w, can replace your classic electric boiler and ensures sustainable hot water in your home. In contrast to the conventional Fothermo boiler, the hybrid version offers the option of reheating via the 230v power grid. This ensures a continuous supply of hot water, regardless of weather conditions or solar radiation. The set includes all the accessories needed to provide hot water in the washbasin, shower or kitchen. Thanks to the plug & play principle, you can install and attach the solar module yourself in just a few simple steps. The Offgridtec 430w Solaranlage with 30l Fothermo hybrid boiler 1x Luxen Solar 430w TopCon Bifacial Solar Panel Full Black Luxneri Series n5 1x Fothermo Hybrid Photovoltaic Boiler 30 Liter 1x MC-4 to mc4 connection cable plug/ socket extension 10m 2x6mm² Fothermo Photovoltaic hybrid water boiler 30 liters The Fothermo 30-liter hybrid water heater produces hot water using inexpensive solar power and has a digital temperature display. The hybrid version enables additional heating via the power grid. Thanks to the plug & play system, no electrician is required for installation. The hybrid boiler offers a clever solution when solar energy is not sufficient. A minimum temperature, e.g. 35°C, can be set with an adjustable auxiliary heating via 230 v. If the temperature falls below this, the boiler automatically reheats with 1,500 w from the mains until the minimum temperature is reached. The maximum water temperature is 65°C, enough for around 72 liters of hot water in a 30-liter boiler. Technical data volume: 29 liters Nominal pressure: 0.7MPa max. heat output: 550w max. current: 15.5A Protection class: ip 24 Dimensions: 400 x 400 x 600 mm Weight: 15 kg The bifacial Luxen Solar 430w Full Black solar module The monocrystalline and bifacial 430w Full Black Series n5 solar module from Luxen Solar (mpn LNvB-430ND) impresses with a combination of different technologies, such as N-TOPCon cell technology and a 108 half-cell layout. The smbb half-cut cell technology was also used in production to increase performance. The state-of-the-art solar module represents the pinnacle of solar technology, offering impressive power output and low LCOE. Technical data maximum power: 430w Module voltage (vmp): 32.04v max. current (imp): 13.42A Open circuit voltage (voc): 38.96v Short-circuit current (Isc): 14.13A Module efficiency: 22.02% Dimensions: 1722 x 1134 x 30 mm Operating temperature range: -40°C to +85°C Cells: 108 (6x18) Protection class ip68 max. operating voltage: 1500v DC Weight: 23,5kg

The Offgridtec 860w Solaranlage with 80l Fothermo Hybrid boiler (mpn 018910) is the ideal solar set for your hot water supply and can reduce your electricity costs by up to 100%. The photovoltaic boiler, with its high output of 550w, can replace your classic electric boiler and ensures sustainable hot water in your home. In contrast to the conventional Fothermo boiler, the hybrid version offers the option of reheating via the 230v power grid. This ensures a continuous supply of hot water, regardless of weather conditions or solar radiation. The set includes all accessories for providing hot water in the washbasin, shower or kitchen. Thanks to the plug & play principle, you can install and attach the solar module yourself in just a few simple steps The Offgridtec 860w Solaranlage with 80l Fothermo hybrid boiler 2x Luxen Solar 430w n5 Mono Bifacial Glass-Glass Full Black Solar panel 1x Fothermo Hybrid Photovoltaic Boiler 80 Liter 2x MC-4 to mc4 connection cable plug/ socket extension 10m 2x6mm² 1x Offgridtec 2-way branch sockets Y-connector incl. cable extension (pair) Fothermo Photovoltaic hybrid water boiler 80 liters The Fothermo 80L hybrid water boiler produces hot water using inexpensive solar power and has a digital temperature display. The hybrid version enables additional heating via the power grid. Thanks to the plug & play system, no electrician is required for installation. Technical data volume: 77 liters Nominal pressure: 0.7MPa max. heat output: 550w max. current: 15.5A Protection class: ip 24 Dimensions: 470 x 480 x 900 mm Weight: 25 kg 1500w afterheating The Fothermo Hybrid Boiler offers a clever solution in the event that solar energy is not sufficient. A minimum temperature, e.g. 35°C, can be set with an adjustable auxiliary heating via 230 v. If the temperature falls below this, the boiler automatically reheats with 1,500 w from the mains until the minimum temperature is reached. The maximum water temperature is 65°C, enough for around 180 liters of hot water in an 80-liter boiler. The bifacial Luxen Solar 430w Full Black solar module The monocrystalline and bifacial 430w Full Black Series n5 solar module from Luxen Solar (mpn LNvB-430ND) impresses with a combination of different technologies, such as N-TOPCon cell technology and a 108 half-cell layout. The smbb half-cut cell technology was also used in production to increase performance. The state-of-the-art solar module represents the pinnacle of solar technology, offering impressive power output and low LCOE. Technical data maximum power: 430w Module voltage (vmp): 32.04v max. current (imp): 13.42A Open circuit voltage (voc): 38.96v Short-circuit current (Isc): 14.13A Module efficiency: 22.02% Dimensions: 1722 x 1134 x 30 mm Operating temperature range: -40°C to +85°C Cells: 108 (6x18) Protection class ip68 max. operating voltage: 1500v DC Weight: 23,5kg

The Offgridtec 2.2kW Solaranlage with the 200l Fothermo Boiler (mpn 018915) offers a comprehensive solution for your hot water supply. Included are Jinko Solar modules with a total output of 2.2kWp and all the necessary cables to ensure a smooth installation. The photovoltaic water heater has an integrated heat exchanger for an environmentally friendly supply of hot water and can be seamlessly connected to existing heating systems. You can use hot water in the sink, shower or kitchen without having to connect to the mains. The installation of the Solarasystem does not require a specialist and can be completed in just a few simple steps. Components of the Offgridtec 2.2kW Solaranlage with 200l Fothermo boiler 5x Jinko Tiger Neo 440w 54hl4r-(v) Solar module Monocrystalline N-Type Blackframe 1x Fothermo 200 liter photovoltaic boiler 2x Offgridtec 2-fold branch sockets Y-connectors incl. cable extension (pair) 3x connecting cable mc4 to mc4 6mm² 10m red/black Fothermo Photovoltaic water boiler 200 liters - Water heater The Fothermo 200L water heater uses solar energy to provide cost-effective and environmentally friendly hot water. With three independently operating photovoltaic heating elements, it supplies hot water quickly and reliably. The 3 MPP trackers and DC heating elements ensure a photovoltaic heating output of up to 1,800W. Flexible inlets and outlets allow individual installation, including the option of connecting a circulation pipe. Each boiler is supplied with pressure relief and non-return valves. The floor-standing boiler can use up to a total of 6000Wp of photovoltaic power. An existing heating system can be connected directly to the heat exchangers integrated in the boiler to ensure sufficient hot water is available even on days with little sunshine. Technical data Fothermo 200l water boiler Volume: 200 liters Max. Heat loss: 47.5W Nominal pressure: 0.8 MPa Dimensions: 1430 x 600 x 690 mm Weight: 74kg 3 year manufacturer's warranty 3 MPP trackers Heat exchanger Nominal pressure: 1 MPa Max. Temperature of the heating fluid: 110°C Max. Temperature in the tank heated by the heat exchanger: 95°C Surface area: 0.90 m² Volume: 4.3 liters Continuous output according to din 4708: 25kW Flow rate according to din 4708: 10 L/min Output according to en 12897: 18.6kW Heating time according to en 12897: 28.8 min Pressure drop: 120 mbar Photovoltaic heating Max. Current consumption: 16A Rated electrical power: 1800W Max. connected power: 6000Wp Max. connected power permppt: 2000Wp Max. Water temperature: 65°C Max. Open circuit voltage: 50V Afterheating The boiler can be reheated in various ways if there is insufficient solar radiation. One option is to use an existing pallet, gas or oil heating system, which is connected to the boiler via the integrated heat exchanger. A temperature sensor in the boiler controls the additional heating. Alternatively, an electric heating element with a 6/4 inch thread can be installed. The maximum water temperature is 65°C, and a heated 200-liter boiler can extract around 450 liters of water at 34°C. The Jinko Tiger Neo 440w Blackframe solar module TheJinkotiger Neo N-Type is a 440w solar module with monocrystalline cells and N-type technology. The solar cells use super multi-busbar technology. This efficiently reduces the loss due to microcracks, reduces the current transmission path by 50% and improves cell efficiency. PID resistance (excellent anti-PID performance guarantee thanks to optimized mass production processes and material control) Positive power tolerance of 0~+3% High efficiency of over 22% Manufacturer product warranty: 15 years Hot 2.0 technology Improved mechanical resistance to external influences Improved performance in low light Technical specifications Module voltage (Vmp): 32.81 V Open circuit voltage (Voc): 39.38 V max. current (Imp): 13.41 A Short-circuit current (Isc): 13.86 A max. system voltage: 10000/1500 v/dc (IEC) permissible ambient temperature: -40°C - +85°C Dimensions: 1762 x 1134 x 30 mm Weight: 22 kg